{"title":"Mercury Marine Mechanical Throttle \u0026 Shift Cables","description":"\u003ch2\u003eMercury Marine Mechanical Throttle \u0026amp; Shift Cables\u003c\/h2\u003e\n\u003cp\u003eMercury Marine \u003cstrong\u003eMechanical Throttle \u0026amp; Shift Cables\u003c\/strong\u003e are the workhorse connection between your control box and your engine on cable-driven rigging systems. When cables are the correct length and routed properly, your helm feels smooth, shifting is positive, and throttle response is predictable. If your controls feel stiff, sticky, or notchy, replacing worn cables is one of the fastest ways to bring back that “like new” control feel.\u003c\/p\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eWhat Throttle and Shift Cables Do\u003c\/h3\u003e\n\u003cp\u003eMechanical control systems use two primary cables:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrottle cable\u003c\/strong\u003e – transfers lever movement to engine throttle input for power control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShift cable\u003c\/strong\u003e – engages forward, neutral, and reverse through the engine’s shift linkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth cables work together to deliver confident docking, smooth acceleration, and consistent operation on the water.\u003c\/p\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eWhy Correct Cable Length and Routing Matters\u003c\/h3\u003e\n\u003cp\u003eEven a high-quality cable can feel stiff if it is too short, routed with tight bends, or forced around sharp corners. Using the correct length and clean routing helps reduce friction and improves lever feel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid tight bends\u003c\/strong\u003e that increase resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoute through rigging tubes cleanly\u003c\/strong\u003e to reduce wear points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose the correct length\u003c\/strong\u003e to prevent binding and premature cable fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eSigns Your Cables Need Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStiff throttle movement\u003c\/strong\u003e or increasing lever resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNotchy shifting\u003c\/strong\u003e or difficulty finding neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelayed response\u003c\/strong\u003e between lever movement and engine reaction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion\u003c\/strong\u003e at cable ends or mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrayed, cracked, or worn housing\u003c\/strong\u003e from age, heat, or vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eGood Rigging = Better Boating\u003c\/h3\u003e\n\u003cp\u003eMechanical rigging lives in a harsh environment—sun, moisture, vibration, and salt air all take a toll. Replacing cables as part of your maintenance plan helps restore smooth operation, reduces stress on control components, and improves confidence when docking, maneuvering, and running at speed.\u003c\/p\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eShop Mercury Mechanical Cables at PartsVu\u003c\/h3\u003e\n\u003cp\u003ePartsVu carries OEM \u003cstrong\u003eMercury Marine mechanical throttle and shift cables\u003c\/strong\u003e to help you rig it right the first time. Whether you are replacing worn cables, building a new console, or correcting a stiff control feel, our team can help you match the right cable style and length for your Mercury control system and engine setup.\u003c\/p\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003cp\u003eWhy choose PartsVu? At PartsVu, we are boaters serving boaters, providing genuine Honda marine engine parts that make maintenance, repair, and upgrades straightforward. Our expert customer service, extensive OEM catalog, and resources remove the guesswork, ensuring you get the exact part you need quickly and reliably. We offer complete OEM parts for Honda engines, emphasizing ease of ordering, fast shipping, and knowledgeable support so you can focus on enjoying your time on the water.\u003c\/p\u003e","products":[{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-15-ft-8m0082538","title":"Mercury – Platinum Plus Throttle and Shift Cable 15 Foot | Mechanical Engine Control | 8M0082538","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 15 Foot | Mechanical Engine Control | 8M0082538\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus throttle and shift cable is designed for Gen II mechanical control systems where smooth feel and predictable response are critical at the helm. Built for longer routing runs, it delivers noticeably lighter and more refined operation than standard mechanical cables while maintaining a direct, dependable connection between the control and the engine.\u003c\/p\u003e\n\u003cp\u003eThe fifteen foot length is ideal for wider consoles and deeper helm layouts where clean routing helps prevent binding and excess resistance. Proper cable length and relaxed routing support consistent throttle response and clean shift engagement during everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus construction reduces internal friction for smoother control feel\u003c\/li\u003e\n\u003cli\u003eFifteen foot length supports longer mechanical control routing paths\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Mercury Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced corrosion resistance for marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned only for Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eAlways confirm required cable length before ordering\u003c\/li\u003e\n\u003cli\u003eProper routing with gradual bends helps prevent stiffness and premature wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems is this cable designed for?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen II mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables use low-friction internal construction to provide lighter, smoother control movement and more consistent response over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) When should I choose a 15-foot control cable?\u003c\/strong\u003e\u003cbr\u003eA 15-foot cable is typically used on boats with wider consoles, deeper helm layouts, or longer helm-to-engine routing paths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Can this cable be used with Gen I control systems?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed for Gen II mechanical controls only. Using the wrong generation cable can cause fitment and performance issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) How does proper routing affect cable performance?\u003c\/strong\u003e\u003cbr\u003eSmooth routing with gradual bends reduces internal resistance, improves control feel, and helps extend cable service life.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":45626534330659,"sku":"8M0082538","price":56.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_12.png?v=1698793048"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-26-ft-8m0082549","title":"Mercury – Platinum Plus Throttle and Shift Cable 26 Foot | Mechanical Engine Control | 8M0082549","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 26 Foot | Mechanical Engine Control | 8M0082549\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (26 Foot \/ 7.9 m) is designed for boats equipped with Mercury Gen II mechanical control systems where longer routing runs still require smooth, predictable control. This cable provides a direct mechanical connection with lighter, more refined movement than standard control cables, helping maintain precise throttle and shift response at the helm. The 26-foot length is well suited for wide-beam boats, deeper hulls, and extended console-to-engine layouts where consistent control feel is critical.\u003c\/p\u003e\n\u003cp\u003eThrottle and shift performance are directly influenced by cable condition, routing, and length selection. Routine inspection for chafing, corrosion at end fittings, tight bends, and secure mounting can help prevent stiffness and uneven movement. Proper routing and adjustment allow the Platinum Plus low-friction design to perform as intended, reducing internal wear and supporting reliable control response during docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Construction – Reduced internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e26-Foot (7.9 m) Cable Length – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Interface – Designed specifically for Mercury Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003ePlatinum Plus control series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen II mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required to maintain smooth operation and safe shifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003eThey feature a low-friction internal design that delivers lighter, smoother throttle and shift movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What control systems is this cable designed for?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen II mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) When should a Platinum Plus throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace it if you notice stiffness, delayed response, corrosion, or uneven control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with Gen I control systems?\u003c\/strong\u003e\u003cbr\u003eNo. Platinum Plus cables are designed for Gen II mechanical controls only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury Platinum Plus cable?\u003c\/strong\u003e\u003cbr\u003eOEM Platinum Plus cables are built to Mercury specifications, helping ensure proper fit, long service life, and consistently smooth control feel.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":45626551140643,"sku":"8M0082549","price":74.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_23.png?v=1698793047"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-16-ft-8m0082539","title":"Mercury – Platinum Plus Throttle and Shift Cable 16 Foot | Mechanical Engine Control | 8M0082539","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 16 Foot | Mechanical Engine Control - 8M0082539\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is built for mechanical control systems where refined feel and predictable response matter at the helm. Designed for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, smoother movement than standard control cables. The 16-foot length is ideal for longer routing layouts where clean cable paths help reduce resistance and maintain smooth operation.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length supports proper routing and helps prevent sharp bends that can increase control effort over time. With correct installation, secure fastening, and routine inspection, this cable contributes to steady throttle response and clean shift engagement during everyday use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Cable Construction – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e16-Foot Cable Length – Suitable for extended control layouts and longer routing runs\u003c\/li\u003e\n\u003cli\u003eGen II Control Compatibility – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built for durability in marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 16-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm required cable length and Gen II control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eProper routing with gradual bends and secure fastening helps preserve smooth operation and extend cable service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 16 feet long, ideal for extended routing paths and larger control layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to withstand moisture, vibration, and typical marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with gradual bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":45626570637603,"sku":"8M0082539","price":57.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_13.png?v=1698793047"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-20-ft-8m0082543","title":"Mercury – Platinum Plus Throttle and Shift Cable 20 Foot | Mechanical Engine Control | 8M0082543","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 20 Foot | Mechanical Engine Control | 8M0082543\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is designed for mechanical control systems where smooth operation and predictable feel are important. Built for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with lighter, more refined movement than standard control cables. The 20-foot (6.1 meter) length is ideal for longer routing runs where clean cable paths help maintain consistent control without excess resistance, making it a dependable option for boaters who prefer precise mechanical handling over electronic controls.\u003c\/p\u003e\n\u003cp\u003eSelecting the correct cable length helps reduce routing strain and internal resistance, supporting smoother throttle response and cleaner shifting over time. Proper routing, secure mounting, and routine inspection also help extend service life and maintain consistent control feel during everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Cable Construction – Reduces internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e20-Foot Cable Length (6.1 m) – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Compatibility – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 20-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length requirements can vary by boat layout and control placement.\u003c\/li\u003e\n\u003cli\u003eConfirm required cable length and Gen II control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eProper routing and adjustment are required to ensure full control travel and smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 20 feet (6.1 meters) long, ideal for extended routing runs and larger control layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and delivers lighter, smoother control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to withstand moisture, vibration, and regular marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with gradual bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":45626571096355,"sku":"8M0082543","price":65.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_17.png?v=1698793046"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-17-ft-8m0082540","title":"Mercury – Platinum Plus Throttle and Shift Cable 17 Foot | Mechanical Engine Control | 8M0082540","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 17 Foot | Mechanical Engine Control | 8M0082540\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus throttle and shift cable is designed for Gen II mechanical control systems where smooth feel and predictable response are essential. Built with Platinum Plus low-friction construction, it delivers noticeably lighter and more refined control movement than standard mechanical cables while maintaining a direct mechanical connection between the helm and engine.\u003c\/p\u003e\n\u003cp\u003eThe seventeen-foot length is ideal for boats with extended helm-to-engine routing, including wider consoles and deeper layouts where clean cable paths help prevent binding and excess resistance. Selecting the correct cable length supports proper routing, reduces sharp bends, and helps maintain steady throttle response and clean shift engagement during everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus construction reduces internal friction and control effort\u003c\/li\u003e\n\u003cli\u003eSeventeen foot length supports extended mechanical control routing\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Mercury Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced corrosion resistance for marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned only for Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eAlways confirm required cable length before ordering\u003c\/li\u003e\n\u003cli\u003eProper routing with gradual bends helps prevent stiffness and premature wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems is this cable compatible with?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed exclusively for Mercury Gen II mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables use low-friction internal construction to provide lighter control effort, smoother movement, and more consistent response over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) When should I use a 17-foot control cable?\u003c\/strong\u003e\u003cbr\u003eA 17-foot cable is commonly used on boats with wider consoles, deeper helm layouts, or longer helm-to-engine routing paths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Can this cable be used with Gen I control systems?\u003c\/strong\u003e\u003cbr\u003eNo. Gen II control cables are not compatible with Gen I systems and should not be mixed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why is proper routing important?\u003c\/strong\u003e\u003cbr\u003eSmooth routing with gradual bends reduces internal resistance, improves control feel, and helps extend overall cable service life.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":45626578207011,"sku":"8M0082540","price":59.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_14.png?v=1698793046"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-13-ft-8m0082486","title":"Mercury – Gen I Throttle and Shift Cable 13 Foot | Mechanical Engine Control | 8M0082486","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 13 Foot | Mechanical Engine Control | 8M0082486\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable is a mechanical control cable designed to connect the control box to the engine for direct throttle and shift input. Built for boats running traditional Mercury Gen I mechanical control systems, it delivers a familiar, hands-on control feel without electronic involvement. The 13-foot length is well suited for deeper hulls, side consoles, and layouts with longer routing paths where shorter cables may limit installation options.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables wear gradually as routing points move, jackets age, and internal liners lose smoothness over time. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure fastening can help reduce premature wear. Replacing a worn cable helps restore predictable throttle and shift response and supports safer low-speed handling and docking.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Control Design\u003c\/strong\u003e – Provides direct throttle and shift movement without electronic interference\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Foot Cable Length\u003c\/strong\u003e – Supports cleaner routing in wider hulls and extended console layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to withstand vibration, moisture, and daily marine exposure\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation I (Gen I) control systems\u003c\/li\u003e\n\u003cli\u003eNon-electronic throttle and shift configurations\u003c\/li\u003e\n\u003cli\u003eCompatible with legacy Mercury control installations requiring a 13-foot Gen I throttle and shift cable\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable selection depends on control generation, required cable travel, and rigging layout\u003c\/li\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility and correct length before ordering\u003c\/li\u003e\n\u003cli\u003eProper routing and adjustment—avoiding sharp bends, pinch points, and heat exposure—are required for smooth operation and long service life\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation I (Gen I) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 13 feet long, suitable for deeper hulls, side consoles, and longer routing paths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Are mechanical throttle and shift cables wear items?\u003c\/strong\u003e\u003cbr\u003eYes. Over time, jackets, liners, and routing movement can affect performance. Routine inspection and replacement help maintain consistent control feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Why use an OEM Mercury Gen I control cable instead of a generic replacement?\u003c\/strong\u003e\u003cbr\u003eMercury OEM cables are built to original specifications for fit, movement, and durability, helping maintain proper cable travel and predictable throttle and shift response.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eEnsure correct routing, avoid sharp bends or pinch points, secure the cable properly, and verify full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":45626578272547,"sku":"8M0082486","price":53.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_7.png?v=1698793057"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-14-ft-8m0082537","title":"Mercury – Platinum Plus Throttle and Shift Cable (Gen II) | 8M0082537","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable (Gen II) | 8M0082537\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is engineered for mechanical control systems where refined feel and predictable response matter. Designed for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, smoother movement than standard control cables. The 14-foot length is well suited for longer routing paths where clean cable layout helps reduce internal resistance and maintain smooth operation.\u003c\/p\u003e\n\u003cp\u003eSelecting the correct cable length helps support proper routing and minimizes tight bends that can increase control effort over time. With proper installation, secure fastening, and routine inspection, this cable helps maintain consistent throttle response and clean shift engagement during everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-Foot Cable Length\u003c\/strong\u003e – Suitable for extended control layouts and longer routing runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built for durability in marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 14-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify required cable length and Gen II control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eProper routing with gradual bends and secure fastening is required to preserve smooth operation and cable longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 14 feet long, ideal for extended routing paths and longer control layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables use refined internal construction to reduce friction and deliver smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It features enhanced corrosion resistance to withstand moisture, vibration, and typical marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eConfirm correct cable length, route with gradual bends, secure the cable properly, and verify full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":45626580926755,"sku":"8M0082537","price":54.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_11.png?v=1698793050"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-18-ft-8m0082541","title":"Mercury – Platinum Plus Throttle and Shift Cable 18 Foot | Mechanical Engine Control | 8M0082541","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 18 Foot | Mechanical Engine Control | 8M0082541\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is designed for mechanical control systems where smooth, reliable control is essential. Built for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with lighter, more refined movement than standard control cables. The 18-foot (5.5 meter) length is ideal for longer routing runs where clean cable paths help maintain consistent feel without excess resistance, making it a strong choice for boaters who prefer precise mechanical control without transitioning to electronic systems.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length helps reduce routing strain and internal resistance, supporting smoother throttle response and cleaner shifting over time. Proper routing, secure fastening, and routine inspection also help extend service life and maintain consistent control feel during everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Cable Construction – Reduces internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e18-Foot Cable Length (5.5 m) – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Compatibility – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring an 18-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length selection and routing can vary by boat layout and control placement.\u003c\/li\u003e\n\u003cli\u003eConfirm required cable length and Gen II control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eProper routing with gradual bends and secure mounting is required to ensure smooth operation and full control travel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 18 feet (5.5 meters) long, ideal for extended routing runs and larger control layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables use refined internal construction to reduce friction, resulting in lighter, smoother control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It features enhanced corrosion resistance to withstand moisture, vibration, and regular marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with gradual bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":45626583810339,"sku":"8M0082541","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_15.png?v=1698793046"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-12-ft-8m0082535","title":"Mercury – Platinum Plus Throttle and Shift Cable 12 Foot | Mechanical Engine Control | 8M0082535","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 12 Foot | Mechanical Engine Control | 8M0082535\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is built for mechanical control systems where refined feel and dependable operation matter. Designed for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, smoother movement than standard control cables. The 12-foot length is well suited for longer mid-range routing runs where clean cable layout and proper support are important.\u003c\/p\u003e\n\u003cp\u003eSelecting the correct cable length and construction helps maintain predictable throttle response and clean shifting over time. Proper routing, secure fastening, and routine inspection can reduce internal wear and help preserve smooth control feel during regular operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Foot Cable Length\u003c\/strong\u003e – Suitable for extended mid-length control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 12-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with smooth, gradual bends and secure it properly to help preserve long-term performance and smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 12 feet long, ideal for longer mid-range routing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and everyday marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with smooth bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":45626594525475,"sku":"8M0082535","price":51.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_9.png?v=1698793049"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-16-ft-8m0085963","title":"Mercury – Gen I Throttle and Shift | 16 Ft | Mechanical Control Cable - 8M0085963","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift | 16 Ft | Mechanical Control Cable | 8M0085963\u003c\/h2\u003e\n\n\u003cp\u003eThe Mercury Gen I throttle and shift cable is built for Mercury mechanical control systems that require additional routing length for a clean, stress-free installation. It is commonly used on wider consoles and deeper helm layouts where shorter cables can create tight bends or unnecessary strain. The 16-foot length allows the cable to route naturally through the rigging path while maintaining proper control geometry and smooth operation at the helm.\u003c\/p\u003e\n\n\u003cp\u003eSelecting the correct cable length helps reduce internal resistance, protect connection points, and maintain consistent throttle response and clean shifting. Proper routing and adjustment support steady helm feel and help extend the service life of both the cable and related control components.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGen I Mechanical Design – Delivers smooth, consistent throttle and shift operation\u003c\/li\u003e\n  \u003cli\u003e16-Foot Cable Length – Supports relaxed routing on larger helm layouts\u003c\/li\u003e\n  \u003cli\u003eLow-Friction Inner Core – Helps maintain smooth, even control effort\u003c\/li\u003e\n  \u003cli\u003eOEM Mercury Construction – Built for long service life and reliable performance\u003c\/li\u003e\n  \u003cli\u003eThrottle \u0026amp; Shift Cable – Controls both throttle input and gear selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eMechanical throttle and shift control applications\u003c\/li\u003e\n  \u003cli\u003eGen I control system installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm Gen I control compatibility before ordering\u003c\/li\u003e\n  \u003cli\u003eVerify required cable length based on helm layout and routing path\u003c\/li\u003e\n  \u003cli\u003eProper routing and adjustment are required for full throttle and shift engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003e\nThis cable is designed specifically for Mercury Gen I mechanical control systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2) When should I choose a 16-foot cable?\u003c\/strong\u003e\u003cbr\u003e\nA 16-foot cable is ideal for wider consoles or deeper helm layouts where shorter cables may create tight bends or strain.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3) Can this cable be used with Gen II controls?\u003c\/strong\u003e\u003cbr\u003e\nNo. Gen I and Gen II control cables are not interchangeable and must match the correct control system generation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e4) Why is proper routing important?\u003c\/strong\u003e\u003cbr\u003e\nClean routing reduces friction, prevents binding, and helps maintain smooth throttle and shift operation over time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e5) Why use an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003e\nOEM cables are built to Mercury specifications for materials, bend tolerance, and cable travel, helping ensure smoother operation and long service life.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935331733795,"sku":"8M0085963","price":39.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_11.png?v=1698792979"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-15-ft-8m0085960","title":"Mercury – Gen I Throttle and Shift | 15 Ft | Mechanical Control Cable - 8M0085960","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift | 15 Ft | Mechanical Control Cable | 8M0085960\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I throttle and shift cable is designed for Mercury mechanical control systems that require a longer mid-range routing distance between the helm and engine. It is commonly used on center consoles and helm layouts where shorter cables feel stretched but oversized lengths would introduce unnecessary slack. The 15-foot length allows the cable to route naturally through the rigging path while maintaining proper control geometry and smooth operation.\u003c\/p\u003e\n\u003cp\u003eSelecting the correct cable length helps reduce internal resistance, prevent binding, and maintain consistent throttle response and clean shifting. Proper routing and adjustment support a steady helm feel while helping extend the service life of the cable and connected control components.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGen I Mechanical Design – Provides smooth, reliable throttle and shift operation\u003c\/li\u003e\n\u003cli\u003e15-Foot Cable Length – Ideal for longer mid-range control runs without excess slack\u003c\/li\u003e\n\u003cli\u003eLow-Friction Inner Core – Helps maintain steady, predictable control effort at the helm\u003c\/li\u003e\n\u003cli\u003eOEM Mercury Construction – Built for proper cable travel, durability, and long service life\u003c\/li\u003e\n\u003cli\u003eThrottle \u0026amp; Shift Cable – Controls both throttle input and gear selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift control applications\u003c\/li\u003e\n\u003cli\u003eGen I control system installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify required cable length based on helm layout and routing path\u003c\/li\u003e\n\u003cli\u003eProper routing and adjustment are required for full throttle and shift engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should I choose a 15-foot cable?\u003c\/strong\u003e\u003cbr\u003eChoose a 15-foot cable when shorter lengths feel tight but longer cables would create excess slack, especially on center consoles or deeper helm layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Can this cable be used with Gen II controls?\u003c\/strong\u003e\u003cbr\u003eNo. Gen I and Gen II cables are not interchangeable and must be matched to the correct control system generation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Why is proper routing important?\u003c\/strong\u003e\u003cbr\u003eClean routing reduces internal friction, prevents binding, and helps maintain smooth throttle and shift response over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications for materials, bend tolerance, and cable travel, helping ensure smoother operation and longer service life.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935331832099,"sku":"8M0085960","price":39.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_10.png?v=1698792979"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-17-ft-8m0085956","title":"Mercury – Gen I Throttle and Shift | 17 Ft | Mechanical Control Cable - 8M0085956","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift | 17 Ft | Mechanical Control Cable | 8M0085956\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I throttle and shift cable is designed for mechanical control systems that require additional length for clean, stress-free routing. It is well suited for larger consoles and deeper helm layouts where shorter cables may feel stretched or create tight bends. The 17-foot length allows the cable to route naturally from the helm to the engine, helping maintain smooth control feel and reliable operation.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length helps reduce internal strain and connection stress, supporting smoother throttle response and more consistent shifting. Proper routing also helps extend cable life and maintain predictable control feel over time.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGen I Mechanical Design – Supports smooth, dependable throttle and shift operation\u003c\/li\u003e\n\u003cli\u003e17-Foot Length – Ideal for extended control runs on larger or deeper helm layouts\u003c\/li\u003e\n\u003cli\u003eLow-Friction Inner Core – Helps maintain consistent control feel with reduced effort\u003c\/li\u003e\n\u003cli\u003eOEM Mercury Construction – Designed for durability and proper cable travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift control applications\u003c\/li\u003e\n\u003cli\u003eSide-mount and console-mounted control setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eProper routing is required to avoid tight bends or pinch points\u003c\/li\u003e\n\u003cli\u003eCorrect adjustment is necessary to ensure full throttle and shift engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control system does this cable work with?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should I choose a 17-foot cable?\u003c\/strong\u003e\u003cbr\u003eA 17-foot cable is ideal for larger consoles or deeper helm layouts where shorter cables may feel tight or strained.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Can improper cable length affect performance?\u003c\/strong\u003e\u003cbr\u003eYes. An undersized cable can cause binding, stiff control feel, and premature wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Does this cable include any hardware?\u003c\/strong\u003e\u003cbr\u003eNo. This listing includes the throttle and shift cable only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications for bend tolerance, internal materials, and proper cable travel, helping ensure smooth operation and long service life.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935332192547,"sku":"8M0085956","price":41.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_12.png?v=1698792979"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-13-ft-8m0085952","title":"Mercury – Gen I Throttle and Shift | 13 Ft | Mechanical Control Cable - 8M0085952","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift | 13 Ft | Mechanical Control Cable | 8M0085952\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I throttle and shift cable is designed for Mercury mechanical control systems that require slightly more routing length between the helm and the engine. It is commonly used on mid-size consoles where shorter cables feel stretched and tight bends can negatively affect control feel. The 13-foot length allows the cable to route cleanly and remain relaxed throughout the rigging path, supporting smooth, predictable operation at the helm.\u003c\/p\u003e\n\u003cp\u003eChoosing the correct cable length helps reduce internal friction and strain at connection points. Proper routing supports smoother throttle response, cleaner shifting, and longer service life for the entire control system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGen I Mechanical Cable Design – Supports smooth, reliable throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e13-Foot Cable Length – Ideal for extended mid-range control runs without excess slack\u003c\/li\u003e\n\u003cli\u003eLow-Friction Inner Core – Helps maintain even and predictable control effort\u003c\/li\u003e\n\u003cli\u003eMercury OEM Construction – Designed for durability and consistent performance\u003c\/li\u003e\n\u003cli\u003eThrottle \u0026amp; Shift Cable – Controls both throttle input and gear selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift control applications\u003c\/li\u003e\n\u003cli\u003eMid-size consoles requiring extended mid-length cable routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned exclusively for Gen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eAlways verify required cable length before installation\u003c\/li\u003e\n\u003cli\u003eProper routing and adjustment are required for full throttle and shift engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems is this cable compatible with?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen I mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) Does this cable handle both throttle and shifting?\u003c\/strong\u003e\u003cbr\u003eYes. It is a combined throttle and shift control cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) When should I choose a 13-foot cable?\u003c\/strong\u003e\u003cbr\u003eA 13-foot cable is ideal when a 12-foot cable feels tight and a longer cable would introduce unnecessary slack, especially on mid-size console layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) What problems can occur if the cable length is incorrect?\u003c\/strong\u003e\u003cbr\u003eIncorrect length can cause binding, stiff controls, incomplete throttle travel, poor shifting, and premature cable wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Can this cable be used with Gen II control systems?\u003c\/strong\u003e\u003cbr\u003eNo. Gen II mechanical control systems require Gen II-specific cables and are not compatible with Gen I cables.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935332356387,"sku":"8M0085952","price":38.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_8.png?v=1698792979"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-12-ft-8m0085949","title":"Mercury – Gen I Throttle and Shift | 12 Ft | Mechanical Control Cable - 8M0085949","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift | 12 Ft | Mechanical Control Cable | 8M0085949\u003c\/h2\u003e\n\n\u003cp\u003eThe Mercury Gen I throttle and shift cable is designed for Mercury mechanical control systems that require a balanced mid-length routing between the helm and the engine. It is well suited for small to mid-size consoles where clean cable runs help maintain smooth, predictable control feel. The 12-foot length provides enough reach to avoid tight bends while keeping the installation tidy and properly supported.\u003c\/p\u003e\n\n\u003cp\u003eUsing the correct cable length helps reduce internal friction and minimizes strain at connection points. Proper routing supports smoother operation, improved long-term durability, and stable throttle and shift performance over time.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGen I Mechanical Cable Design – Delivers consistent throttle and shift response\u003c\/li\u003e\n  \u003cli\u003e12-Foot Cable Length – Balances reach while keeping routing clean and organized\u003c\/li\u003e\n  \u003cli\u003eLow-Friction Inner Core – Helps maintain smooth, even control effort at the helm\u003c\/li\u003e\n  \u003cli\u003eMercury OEM Construction – Supports durability and long service life\u003c\/li\u003e\n  \u003cli\u003eThrottle \u0026amp; Shift Cable – Controls both throttle input and gear selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eMechanical throttle and shift control applications\u003c\/li\u003e\n  \u003cli\u003eSmall to mid-size consoles requiring mid-length cable runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned exclusively for Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eAlways confirm required cable length before ordering\u003c\/li\u003e\n  \u003cli\u003eProper routing and adjustment are required for full throttle and shift engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e1) What control systems is this cable compatible with?\u003c\/strong\u003e\u003cbr\u003e\nThis cable is designed specifically for Mercury Gen I mechanical throttle and shift control systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2) Does this cable control both throttle and shifting?\u003c\/strong\u003e\u003cbr\u003e\nYes. It is a combined throttle and shift cable.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3) When should I choose a 12-foot cable?\u003c\/strong\u003e\u003cbr\u003e\nChoose a 12-foot cable when shorter cables feel tight and longer cables would create unnecessary slack, especially on small to mid-size consoles.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e4) What happens if the cable length is incorrect?\u003c\/strong\u003e\u003cbr\u003e\nIncorrect cable length can lead to stiff controls, binding, incomplete throttle travel, and premature wear.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e5) Can this cable be used with Gen II control systems?\u003c\/strong\u003e\u003cbr\u003e\nNo. Gen II mechanical control systems require Gen II-specific cables and are not compatible with Gen I cables.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935332454691,"sku":"8M0085949","price":37.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_7.png?v=1698792979"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-9-ft-8m0085946","title":"Mercury – Gen I Throttle and Shift | 9 Ft | Mechanical Control Cable - 8M0085946","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift | 9 Ft | Mechanical Control Cable | 8M0085946\u003c\/h2\u003e\n\n\u003cp\u003eThe Mercury Gen I throttle and shift cable is designed for Mercury mechanical control systems that need slightly more reach without moving into long cable runs. It is commonly used on compact to mid-size consoles where relaxed routing helps avoid tension, sharp bends, or binding during installation. The 9-foot length provides a clean balance between flexibility and control, helping restore smooth throttle response and predictable shifting at the helm.\u003c\/p\u003e\n\n\u003cp\u003eSelecting the correct cable length reduces internal resistance and minimizes stress on control components. A properly sized and routed Gen I cable supports consistent helm feel, clean gear engagement, and dependable long-term performance between the control box and engine.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGen I Mechanical Cable Design – Provides smooth, consistent throttle and shift operation\u003c\/li\u003e\n  \u003cli\u003e9-Foot Cable Length – Allows relaxed routing without excess slack\u003c\/li\u003e\n  \u003cli\u003eLow-Friction Inner Core – Helps maintain steady, predictable control feel\u003c\/li\u003e\n  \u003cli\u003eMercury OEM Construction – Supports durability and proper cable travel\u003c\/li\u003e\n  \u003cli\u003eThrottle \u0026amp; Shift Cable – Handles both throttle input and gear selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eMechanical throttle and shift control applications\u003c\/li\u003e\n  \u003cli\u003eCompact and mid-size consoles requiring flexible routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned exclusively for Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eAlways confirm required cable length before ordering\u003c\/li\u003e\n  \u003cli\u003eProper routing and adjustment are required for full throttle and shift travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e1) What control systems is this cable compatible with?\u003c\/strong\u003e\u003cbr\u003e\nThis cable is designed specifically for Mercury Gen I mechanical throttle and shift control systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2) Is this a combined throttle and shift cable?\u003c\/strong\u003e\u003cbr\u003e\nYes. This single cable controls both throttle movement and gear shifting.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3) When should I choose a 9-foot cable?\u003c\/strong\u003e\u003cbr\u003e\nA 9-foot cable is ideal when 7–8 ft cables feel tight but longer lengths would introduce unnecessary slack.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e4) What problems can incorrect cable length cause?\u003c\/strong\u003e\u003cbr\u003e\nImproper length can lead to stiff controls, binding, poor routing, and premature wear.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e5) Can this cable be used with Gen II controls?\u003c\/strong\u003e\u003cbr\u003e\nNo. Gen II mechanical control systems require Gen II-specific cables and are not compatible with Gen I cables.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935332487459,"sku":"8M0085946","price":36.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_4.png?v=1698792980"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-11-ft-8m0085951","title":"Mercury – Gen I Throttle and Shift Cable 11 Foot | Mechanical Control Cable | 8M0085951","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift | 11 Ft | Mechanical Control Cable | 8M0085951\u003c\/h2\u003e\n\n\u003cp\u003eThe Mercury Gen I throttle and shift cable is designed for Mercury mechanical control systems that need slightly more reach than standard mid-length options. It is commonly used on compact consoles where routing space is limited, but additional flexibility helps keep bends relaxed and installations clean. The 11-foot length provides added reach without creating excess slack, helping restore smooth, predictable control feel at the helm.\u003c\/p\u003e\n\n\u003cp\u003eUsing the correct cable length helps reduce internal resistance and minimizes stress on control components. Proper routing supports consistent throttle response, clean shifting, and long-term reliability throughout the mechanical control system.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGen I Mechanical Cable Design – Supports smooth and dependable throttle and shift operation\u003c\/li\u003e\n  \u003cli\u003e11-Foot Cable Length – Provides added reach for cleaner routing in compact layouts\u003c\/li\u003e\n  \u003cli\u003eLow-Friction Inner Core – Helps reduce control effort at the helm\u003c\/li\u003e\n  \u003cli\u003eMercury OEM Construction – Supports durability and consistent cable performance\u003c\/li\u003e\n  \u003cli\u003eThrottle \u0026amp; Shift Cable – Handles both throttle input and gear selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eMechanical throttle and shift control applications\u003c\/li\u003e\n  \u003cli\u003eCompact consoles and mid-length routing layouts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned exclusively for Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eAlways confirm required cable length before ordering\u003c\/li\u003e\n  \u003cli\u003eProper routing and adjustment are essential for full throttle and shift engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003e\nThis cable is designed specifically for Mercury Gen I mechanical throttle and shift control systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2) Is this a combined throttle and shift cable?\u003c\/strong\u003e\u003cbr\u003e\nYes. This single cable controls both throttle movement and gear shifting.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3) When should I choose an 11-foot cable instead of 10 feet?\u003c\/strong\u003e\u003cbr\u003e\nChoose 11 feet when a 10-foot cable feels tight and you need slightly more routing flexibility without excess slack.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e4) What problems can incorrect cable length cause?\u003c\/strong\u003e\u003cbr\u003e\nIncorrect length can cause stiff controls, binding, incomplete throttle travel, and premature cable wear.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e5) Can this cable be used with Gen II controls?\u003c\/strong\u003e\u003cbr\u003e\nNo. Gen II mechanical control systems require Gen II-specific cables and are not compatible with Gen I cables.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935332520227,"sku":"8M0085951","price":37.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_6.png?v=1698792980"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-14-ft-8m0085945","title":"Mercury – Gen I Throttle and Shift | 14 Ft | Mechanical Control Cable - 8M0085945","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift | 14 Ft | Mechanical Control Cable | 8M0085945\u003c\/h2\u003e\n\n\u003cp\u003eThe Mercury Gen I throttle and shift cable is designed for Mercury mechanical control systems that require longer routing without moving into oversized cable lengths. It is well suited for mid-size consoles and helm layouts with deeper routing paths where standard cables may feel stretched or create tight bends. The 14-foot length allows the cable to lay naturally through the rigging path while maintaining proper control geometry and smooth operation at the helm.\u003c\/p\u003e\n\n\u003cp\u003eSelecting the correct cable length helps preserve smooth throttle response and clean shifting while reducing internal strain. Proper routing supports consistent control feel and helps extend the service life of both the cable and related control system components.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGen I Mechanical Cable Design – Provides smooth and consistent throttle and shift operation\u003c\/li\u003e\n  \u003cli\u003e14-Foot Cable Length – Supports longer control runs with clean, relaxed routing\u003c\/li\u003e\n  \u003cli\u003eLow-Friction Inner Core – Helps maintain steady and predictable control effort\u003c\/li\u003e\n  \u003cli\u003eMercury OEM Construction – Designed for durability and proper cable travel\u003c\/li\u003e\n  \u003cli\u003eThrottle \u0026amp; Shift Cable – Controls both throttle input and gear selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eMechanical throttle and shift control applications\u003c\/li\u003e\n  \u003cli\u003eMid-size consoles and helm layouts requiring extended mid-range cable routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned exclusively for Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eAlways verify required cable length before installation\u003c\/li\u003e\n  \u003cli\u003eProper routing and adjustment are required for full throttle and shift engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e1) What control systems is this cable compatible with?\u003c\/strong\u003e\u003cbr\u003e\nThis cable is designed specifically for Mercury Gen I mechanical throttle and shift control systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2) Does this cable handle both throttle and shifting?\u003c\/strong\u003e\u003cbr\u003e\nYes. It is a combined throttle and shift control cable.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3) When should I choose a 14-foot cable?\u003c\/strong\u003e\u003cbr\u003e\nA 14-foot cable is ideal when a 12–13 ft cable feels tight, but longer cables would introduce unnecessary slack, especially on mid-size consoles with deeper routing paths.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e4) What happens if the cable length is incorrect?\u003c\/strong\u003e\u003cbr\u003e\nIncorrect length can cause binding, stiff controls, incomplete throttle travel, poor shifting, and premature cable wear.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e5) Can this cable be used with Gen II control systems?\u003c\/strong\u003e\u003cbr\u003e\nNo. Gen II mechanical control systems require Gen II-specific cables and are not compatible with Gen I cables.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935332716835,"sku":"8M0085945","price":41.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_9.png?v=1698792981"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-10-ft-8m0085937","title":"Mercury – Gen I Throttle and Shift | 10 Ft | Mechanical Control Cable - 8M0085937","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift | 10 Ft | Mechanical Control Cable | 8M0085937\u003c\/h2\u003e\n\n\u003cp\u003eThe Mercury Gen I throttle and shift cable is designed for Mercury mechanical control systems that require a mid-range cable length for clean, relaxed routing. It is commonly used on side-mount controls and compact console layouts where shorter cables feel tight and longer cables create unnecessary slack. The 10-foot length strikes a balance between reach and control, helping restore smooth throttle response and predictable shifting at the helm.\u003c\/p\u003e\n\n\u003cp\u003eSelecting the correct cable length reduces internal resistance and minimizes stress on control components. Proper routing supports consistent helm feel, smooth gear engagement, and long-term reliability throughout the mechanical control system.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGen I Mechanical Cable Design – Provides reliable throttle and shift movement\u003c\/li\u003e\n  \u003cli\u003e10-Foot Cable Length – Ideal for mid-range control runs and tidy helm layouts\u003c\/li\u003e\n  \u003cli\u003eLow-Friction Inner Core – Helps maintain smooth, even control effort\u003c\/li\u003e\n  \u003cli\u003eMercury OEM Construction – Supports proper cable travel and long service life\u003c\/li\u003e\n  \u003cli\u003eThrottle \u0026amp; Shift Cable – Handles both throttle input and gear selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eMechanical throttle and shift control applications\u003c\/li\u003e\n  \u003cli\u003eSide-mount and compact console layouts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned exclusively for Gen I mechanical control systems\u003c\/li\u003e\n  \u003cli\u003eAlways verify required cable length before ordering\u003c\/li\u003e\n  \u003cli\u003eProper routing and adjustment are essential for full throttle and shift engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e1) What control systems is this cable compatible with?\u003c\/strong\u003e\u003cbr\u003e\nThis cable is designed specifically for Mercury Gen I mechanical throttle and shift control systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2) Is this a combined throttle and shift cable?\u003c\/strong\u003e\u003cbr\u003e\nYes. This single cable controls both throttle movement and gear shifting.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3) When should I choose a 10-foot cable?\u003c\/strong\u003e\u003cbr\u003e\nA 10-foot cable is ideal when 8–9 ft cables feel tight but longer lengths would add unnecessary slack.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e4) What issues can incorrect cable length cause?\u003c\/strong\u003e\u003cbr\u003e\nIncorrect length can result in stiff controls, binding, incomplete throttle travel, or premature cable wear.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e5) Can this cable be used with Gen II control systems?\u003c\/strong\u003e\u003cbr\u003e\nNo. Gen II mechanical control systems require Gen II-specific cables and are not compatible with Gen I cables.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935333077283,"sku":"8M0085937","price":36.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_5.png?v=1698792984"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-28-ft-8m0082551","title":"Mercury – Platinum Plus Throttle and Shift Cable 28 Foot | Mechanical Engine Control | 8M0082551","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 28 Foot | Mechanical Engine Control | 8M0082551\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (28 Foot \/ 8.5 m) is designed for boats equipped with Mercury Gen II mechanical control systems where longer routing runs still require smooth, controlled operation. This cable delivers a direct mechanical connection with lighter, more refined movement than standard control cables, helping maintain precise throttle and shift response at the helm. The 28-foot length is well suited for wide-beam boats, deeper hulls, and extended console layouts where clean routing supports consistent control feel without transitioning to electronic systems.\u003c\/p\u003e\n\u003cp\u003eThrottle and shift performance are directly influenced by cable condition, routing, and length selection. Routine inspection for chafing, corrosion at end fittings, tight bends, and secure mounting can help prevent stiffness and uneven movement. Proper routing and adjustment allow the Platinum Plus low-friction design to perform as intended, reducing internal wear and supporting reliable control response during docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Construction – Reduced internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e28-Foot (8.5 m) Cable Length – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Interface – Designed specifically for Mercury Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003ePlatinum Plus control series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen II mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required to maintain smooth operation and safe shifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003eThey feature a low-friction internal design that delivers lighter, smoother throttle and shift movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What control systems is this cable designed for?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen II mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) When should a Platinum Plus throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace it if you notice stiffness, delayed response, corrosion, or uneven control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with Gen I control systems?\u003c\/strong\u003e\u003cbr\u003eNo. Platinum Plus cables are designed for Gen II mechanical controls only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury Platinum Plus cable?\u003c\/strong\u003e\u003cbr\u003eOEM Platinum Plus cables are built to Mercury specifications, helping ensure proper fit, long service life, and consistently smooth control feel.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935345824035,"sku":"8M0082551","price":77.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_25.png?v=1698793044"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-27-ft-8m0082550","title":"Mercury – Platinum Plus Throttle and Shift Cable 27 Foot | Mechanical Engine Control | 8M0082550","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 27 Foot | Mechanical Engine Control | 8M0082550\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (27 Foot \/ 8.2 m) is designed for boats equipped with Mercury Gen II mechanical control systems where longer routing runs demand smooth, predictable control. This cable provides a direct mechanical connection with lighter, more refined movement than standard control cables, helping maintain precise throttle and shift response at the helm. The 27-foot length is well suited for wide-beam boats, deeper hulls, and extended console layouts where clean routing supports consistent control feel without transitioning to electronic systems.\u003c\/p\u003e\n\u003cp\u003eThrottle and shift performance are directly influenced by cable condition, routing, and length selection. Routine inspection for chafing, corrosion at end fittings, tight bends, and secure mounting can help prevent stiffness and uneven movement. Proper routing and adjustment allow the Platinum Plus low-friction design to perform as intended, reducing internal wear and supporting reliable control response during docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Construction – Reduced internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e27-Foot (8.2 m) Cable Length – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Interface – Designed specifically for Mercury Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003ePlatinum Plus control series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen II mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required to maintain smooth operation and safe shifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003eThey feature a low-friction internal design that delivers lighter, smoother throttle and shift movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What control systems is this cable designed for?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen II mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) When should a Platinum Plus throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace it if you notice stiffness, delayed response, corrosion, or uneven control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with Gen I control systems?\u003c\/strong\u003e\u003cbr\u003eNo. Platinum Plus cables are designed for Gen II mechanical controls only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury Platinum Plus cable?\u003c\/strong\u003e\u003cbr\u003eOEM Platinum Plus cables are built to Mercury specifications, helping ensure proper fit, long service life, and consistently smooth control feel.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935345889571,"sku":"8M0082550","price":76.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_24.png?v=1698793042"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-24-ft-8m0082547","title":"Mercury – Platinum Plus Throttle and Shift Cable | 24 Ft | Mechanical Engine Control | 8M0082547","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 24 Foot | Mechanical Engine Control | 8M0082547\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (24 Foot \/ 7.3 m) is designed for boats equipped with Mercury Gen II mechanical control systems where smooth, predictable control is essential. This cable provides a direct mechanical connection with lighter, more refined movement than standard control cables, helping maintain precise throttle and shift response at the helm. The 24-foot length is well suited for long routing runs in wide-beam boats or extended console layouts where clean cable paths support consistent control feel.\u003c\/p\u003e\n\u003cp\u003eThrottle and shift performance are directly influenced by cable condition, routing, and length selection. Routine inspection for chafing, corrosion at end fittings, tight bends, and secure mounting can help prevent stiffness and uneven movement. Proper routing with gradual bends allows the Platinum Plus low-friction design to perform as intended, reducing internal wear and supporting reliable control response during docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Construction – Reduced internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e24-Foot (7.3 m) Cable Length – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Interface – Designed specifically for Mercury Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003ePlatinum Plus control series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen II mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eRoute the cable using wide, gradual bends to preserve smooth operation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required to maintain refined control feel and safe shifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003eThey use a low-friction internal design that delivers lighter, smoother throttle and shift movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What control systems is this cable designed for?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen II mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) When should a Platinum Plus throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace it if you notice stiffness, delayed response, corrosion, or uneven control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with Gen I control systems?\u003c\/strong\u003e\u003cbr\u003eNo. Platinum Plus cables are designed for Gen II mechanical controls only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury Platinum Plus cable?\u003c\/strong\u003e\u003cbr\u003eOEM Platinum Plus cables are built to Mercury specifications, helping ensure proper fit, long service life, and consistently smooth control feel.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935345955107,"sku":"8M0082547","price":71.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_21.png?v=1698793043"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-23-ft-8m0082546","title":"Mercury – Platinum Plus Throttle and Shift Cable 23 Foot | Mechanical Engine Control | 8M0082546","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 23 Foot | Mechanical Engine Control | 8M0082546\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (23 Foot \/ 7.0 m) is designed for boats equipped with Mercury Gen II mechanical control systems where smooth, precise control is a priority. This cable connects the control box to the engine using an enhanced internal construction that delivers lighter, more refined throttle and shift movement compared to standard mechanical cables. The 23-foot length is ideal for longer routing runs in wide-beam boats or extended console layouts where clean routing helps preserve consistent control feel.\u003c\/p\u003e\n\u003cp\u003eThrottle and shift performance are directly affected by cable condition and routing. Routine inspection for chafing, corrosion at end fittings, tight bends, and secure mounting can help prevent stiffness and uneven movement. Proper routing and adjustment help maintain the Platinum Plus cable’s smooth operation, reduce internal wear, and support reliable control response during docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Construction – Reduced internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e23-Foot (7.0 m) Cable Length – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Interface – Designed specifically for Mercury Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003ePlatinum Plus control series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen II mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required to maintain smooth operation and safe shifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What is the difference between Platinum Plus and standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature reduced internal friction for lighter, smoother throttle and shift movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What control systems is this cable designed for?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen II mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) When should a Platinum Plus control cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you experience stiffness, delayed response, corrosion, or uneven throttle or shift movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with Gen I control systems?\u003c\/strong\u003e\u003cbr\u003eNo. Platinum Plus cables are designed for Gen II mechanical control systems only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury Platinum Plus cable?\u003c\/strong\u003e\u003cbr\u003eOEM Platinum Plus cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability compared with non-matched replacements.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935346020643,"sku":"8M0082546","price":70.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_20.png?v=1698793044"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-25-ft-8m0082548","title":"Mercury – Platinum Plus Throttle and Shift Cable 25 Foot | Mechanical Engine Control | 8M0082548","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 25 Foot | Mechanical Engine Control | 8M0082548\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (25 Foot \/ 7.6 m) is designed for boats equipped with Mercury Gen II mechanical control systems where smooth, predictable control is essential. This cable provides a direct mechanical connection with lighter, more refined movement than standard control cables, helping maintain precise throttle and shift response at the helm. The 25-foot length is ideal for long routing runs in wide-beam boats or extended console layouts where clean cable paths support consistent control feel without transitioning to electronic controls.\u003c\/p\u003e\n\u003cp\u003eThrottle and shift performance are directly influenced by cable condition, routing, and length selection. Routine inspection for chafing, corrosion at end fittings, tight bends, and secure mounting can help prevent stiffness and uneven movement. Proper routing and adjustment allow the Platinum Plus low-friction design to perform as intended, reducing internal wear and supporting reliable control response during docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Construction – Reduced internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e25-Foot (7.6 m) Cable Length – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Interface – Designed specifically for Mercury Gen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003ePlatinum Plus control series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen II mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required to maintain smooth operation and safe shifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003eThey feature a low-friction internal design that delivers lighter, smoother throttle and shift movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What control systems is this cable designed for?\u003c\/strong\u003e\u003cbr\u003eThis cable is designed specifically for Mercury Gen II mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) When should a Platinum Plus throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace it if you notice stiffness, delayed response, corrosion, or uneven control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with Gen I control systems?\u003c\/strong\u003e\u003cbr\u003eNo. Platinum Plus cables are designed for Gen II mechanical controls only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury Platinum Plus cable?\u003c\/strong\u003e\u003cbr\u003eOEM Platinum Plus cables are built to Mercury specifications, helping ensure proper fit, long service life, and consistently smooth control feel.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935346053411,"sku":"8M0082548","price":73.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_22.png?v=1698793047"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-22-ft-8m0082545","title":"Mercury – Platinum Plus Throttle and Shift Cable 22 Foot | Mechanical Engine Control | 8M0082545","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 22 Foot | Mechanical Engine Control | 8M0082545\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is designed for mechanical control systems where smooth, predictable operation matters at the helm. Built for Mercury Gen II mechanical control applications, it provides a direct mechanical connection with lighter, more refined movement than standard control cables. The 22-foot (6.7 meter) length is a strong fit for longer routing runs, including wide-beam boats and extended console layouts where a clean cable path helps maintain consistent control feel.\u003c\/p\u003e\n\u003cp\u003eControl cable condition directly affects throttle response, shift engagement, and low-speed handling. Routine inspection for chafing, corrosion at end fittings, tight bends, and loose securing points can help prevent stiffness and uneven movement. Proper routing and correct adjustment help preserve smooth operation, reduce internal wear, and support reliable control response over time.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Cable Construction – Reduces internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e22-Foot Cable Length (6.7 m) – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Compatibility – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 22-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControl cable requirements vary by control generation and rigging layout.\u003c\/li\u003e\n\u003cli\u003eConfirm Gen II mechanical control compatibility and correct cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eProper routing—avoiding sharp bends, pinch points, and heat exposure—and correct adjustment are required to maintain smooth movement and safe operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 22 feet (6.7 meters) long, ideal for wide-beam boats and extended console layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Are throttle and shift cables wear items?\u003c\/strong\u003e\u003cbr\u003eYes. Over time, jackets, liners, and routing stress can affect performance. Routine inspection and replacement help maintain consistent control feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides lighter, smoother control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with gradual bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935346118947,"sku":"8M0082545","price":68.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_19.png?v=1698793044"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-19-ft-8m0082542","title":"Mercury – Platinum Plus Throttle and Shift Cable 19 Foot | Mechanical Engine Control | 8M0082542","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 19 Foot | Mechanical Engine Control | 8M0082542\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is built for mechanical control systems where smooth feel and dependable response are important. Designed for Mercury Gen II mechanical control applications, it provides a direct mechanical connection with lighter, more refined movement than standard control cables. The 19-foot (5.8 meter) length is well suited for longer routing runs where clean cable paths help maintain consistent control feel without excess resistance, making it a reliable option for boaters who prefer precise mechanical handling over electronic systems.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length helps reduce routing strain and internal resistance, supporting smoother throttle response and cleaner shifting over time. Proper routing, secure mounting, and routine inspection also help extend service life and maintain consistent control feel during everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Cable Construction – Reduces internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e19-Foot Cable Length (5.8 m) – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Compatibility – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 19-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length selection and routing can vary by boat layout and control placement.\u003c\/li\u003e\n\u003cli\u003eConfirm required cable length and Gen II control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eProper routing with gradual bends and secure mounting is required to ensure smooth operation and full control travel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 19 feet (5.8 meters) long, ideal for extended routing runs and larger control layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and delivers lighter, smoother control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to withstand moisture, vibration, and regular marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with gradual bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935346479395,"sku":"8M0082542","price":64.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_16.png?v=1698793044"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-21-ft-8m0082544","title":"Mercury – Platinum Plus Throttle and Shift Cable 21 Foot | Mechanical Engine Control | 8M0082544","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 21 Foot | Mechanical Engine Control | 8M0082544\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is built for mechanical control systems where smooth, consistent control is essential. Designed for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with lighter, more refined movement than standard control cables. The 21-foot (6.4 meter) length is well suited for longer routing runs where clean cable paths help maintain predictable control without excess resistance, making it a dependable option for boaters who want precise feel without transitioning to electronic systems.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length helps reduce routing strain and internal resistance, supporting smoother throttle response and cleaner shifting over time. Proper installation, secure routing, and routine inspection also help extend cable life and maintain consistent control feel during everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum Plus Cable Construction – Reduces internal friction for smoother throttle and shift movement\u003c\/li\u003e\n\u003cli\u003e21-Foot Cable Length (6.4 m) – Supports clean routing in extended control layouts\u003c\/li\u003e\n\u003cli\u003eGen II Control Compatibility – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003eEnhanced Corrosion Resistance – Built to handle moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 21-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length requirements can vary by boat layout and control placement.\u003c\/li\u003e\n\u003cli\u003eConfirm required cable length and Gen II control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eProper routing and adjustment are required to ensure full control travel and smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 21 feet (6.4 meters) long, ideal for extended routing runs and larger control layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and delivers lighter, smoother control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to withstand moisture, vibration, and regular marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with gradual bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935347003683,"sku":"8M0082544","price":67.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_18.png?v=1698793046"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-11-ft-8m0082534","title":"Mercury – Platinum Plus Throttle and Shift Cable 11 Foot | Mechanical Engine Control | 8M0082534","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 11 Foot | Mechanical Engine Control | 8M0082534\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is built for mechanical control systems where consistent feel and reliable response are important. Designed for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, more refined movement than standard control cables. The 11-foot length works well for mid-range routing where extra reach helps keep rigging clean, supported, and organized.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length and construction helps support smooth throttle response and clean shifting over time. Proper routing, secure fastening, and routine inspection can reduce internal wear and help maintain a refined control feel during regular operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11-Foot Cable Length\u003c\/strong\u003e – Suitable for moderate-length control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring an 11-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with smooth, gradual bends and secure it properly to help preserve long-term performance and smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 11 feet long, ideal for mid-range routing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and everyday marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with smooth bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935347626275,"sku":"8M0082534","price":50.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_8.png?v=1698793048"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-13-ft-8m0082536","title":"Mercury – Platinum Plus Throttle and Shift Cable 13 Foot | Mechanical Engine Control | 8M0082536","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 13 Foot | Mechanical Engine Control | 8M0082536\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is built for mechanical control systems where smooth feel and consistent response are a priority. Designed for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, more refined movement than standard control cables. The 13-foot length works well for longer mid-range routing where clean cable runs help reduce resistance and maintain proper support.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length and construction helps support steady throttle response and clean shifting over time. Proper routing, secure fastening, and routine inspection can help minimize internal wear and preserve smooth control feel during regular operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Foot Cable Length\u003c\/strong\u003e – Suitable for extended mid-length control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 13-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with smooth, gradual bends and secure it properly to help preserve long-term performance and smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 13 feet long, ideal for longer mid-range routing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and everyday marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with smooth bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935347659043,"sku":"8M0082536","price":53.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_10.png?v=1698793046"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-9-ft-8m0082532","title":"Mercury – Platinum Plus Throttle and Shift Cable 9 Foot | Mechanical Engine Control | 8M0082532","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 9 Foot | Mechanical Engine Control | 8M0082532\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is designed for mechanical control systems where refined feel and precise response are important. Built for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, smoother movement than standard control cables. The 9-foot length works well for moderate routing runs where extra reach helps keep rigging clean and organized.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length and construction helps support consistent throttle response and clean shifting over time. Proper routing, secure fastening, and routine inspection can reduce internal wear and help maintain smooth control feel throughout regular use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9-Foot Cable Length\u003c\/strong\u003e – Suitable for mid-length control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 9-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with smooth, gradual bends and secure it properly to help preserve long-term performance and smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 9 feet long, ideal for mid-length routing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and everyday marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with smooth bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935347757347,"sku":"8M0082532","price":47.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_6.png?v=1698793048"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-7-ft-8m0082530","title":"Mercury – Platinum Plus Throttle and Shift Cable 7 Foot | Mechanical Engine Control | 8M0082530","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 7 Foot | Mechanical Engine Control | 8M0082530\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is built for mechanical control systems where refined feel and consistent response are important. Designed for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, smoother movement than standard control cables. The 7-foot length is well suited for moderate routing distances where a bit of extra reach helps keep rigging clean and organized.\u003c\/p\u003e\n\u003cp\u003eSelecting the correct cable length and construction helps support predictable throttle response and clean shifting over time. Proper routing, secure fastening, and routine inspection can help minimize internal wear and maintain smooth control feel during regular operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Foot Cable Length\u003c\/strong\u003e – Suitable for moderate-length control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 7-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with gradual bends and secure it properly to help preserve long-term performance and smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 7 feet long, ideal for moderate routing distances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and regular marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with gradual bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935348150563,"sku":"8M0082530","price":44.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_4.png?v=1698793049"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-6-ft-8m0082529","title":"Mercury – Platinum Plus Throttle and Shift Cable 6 Foot | Mechanical Engine Control | 8M0082529","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 6 Foot | Mechanical Engine Control | 8M0082529\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is designed for mechanical control systems where refined feel and dependable operation matter. Built for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably smoother movement than standard control cables. The 6-foot length works well for short-to-moderate routing runs, helping keep rigging clean and manageable without excess slack.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length and construction helps support consistent throttle response and clean shifting over time. Proper routing, secure fastening, and routine inspection can reduce internal wear and help maintain smooth control feel throughout regular use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot Cable Length\u003c\/strong\u003e – Suitable for compact and mid-size control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 6-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with smooth bends and secure it properly to help preserve long-term performance and control feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 6 feet long, suitable for compact and mid-size routing layouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and everyday marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with smooth bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935348412707,"sku":"8M0082529","price":42.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_3.png?v=1698793049"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-8-ft-8m0082531","title":"Mercury – Platinum Plus Throttle and Shift Cable 8 Foot | Mechanical Engine Control | 8M0082531","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 8 Foot | Mechanical Engine Control | 8M0082531\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is built for mechanical control systems where refined feel and dependable response are important. Designed for Mercury Gen II mechanical control applications, it provides a direct mechanical connection with noticeably lighter, smoother movement than standard control cables. The 8-foot length works well for moderate routing runs where added flexibility helps keep rigging clean and organized.\u003c\/p\u003e\n\u003cp\u003eUsing the correct cable length and construction helps support consistent throttle response and clean shifting over time. Proper routing, secure fastening, and routine inspection can reduce internal wear and help maintain smooth control feel during regular operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Foot Cable Length\u003c\/strong\u003e – Suitable for mid-length control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring an 8-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with gradual bends and secure it properly to help preserve long-term performance and smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 8 feet long, ideal for mid-length routing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and everyday marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with gradual bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935348773155,"sku":"8M0082531","price":45.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_5.png?v=1698793048"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-10-ft-8m0082533","title":"Mercury – Platinum Plus Throttle and Shift Cable 10 Foot | Mechanical Engine Control | 8M0082533","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 10 Foot | Mechanical Engine Control | 8M0082533\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is built for mechanical control systems where refined feel and consistent response are important. Designed for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, smoother movement than standard control cables. The 10-foot length is ideal for moderate routing runs that need a bit of extra reach without creating excess slack.\u003c\/p\u003e\n\u003cp\u003eSelecting the correct cable length and construction helps support consistent throttle response and clean shifting over time. Proper routing, secure fastening, and routine inspection can reduce internal wear and help maintain smooth control feel throughout regular use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Cable Length\u003c\/strong\u003e – Suitable for mid-length control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 10-foot throttle and shift cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with gradual bends and secure it properly to help preserve long-term performance and smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 10 feet long, ideal for moderate routing distances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and everyday marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with gradual bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935349068067,"sku":"8M0082533","price":48.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_7.png?v=1698793049"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-5-ft-8m0082528","title":"Mercury – Platinum Plus Throttle and Shift Cable 5 Foot | Mechanical Engine Control | 8M0082528","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 5 Foot | Mechanical Engine Control | 8M0082528\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is designed for mechanical control systems where smooth operation and precise control feel are important. Built for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, more refined movement than standard control cables. The \u003cstrong\u003e5-foot\u003c\/strong\u003e length works well for compact boats and short control runs that still require clean, intentional routing.\u003c\/p\u003e\n\u003cp\u003eProperly sized and routed control cables help support consistent throttle response and clean shifting over time. Selecting the correct cable length, routing with gradual bends, and performing routine inspections can reduce internal wear and help preserve a refined control feel during everyday operation.\u003c\/p\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Foot Cable Length\u003c\/strong\u003e – Suitable for short routing runs and compact control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical \u003cstrong\u003eGeneration II (Gen II)\u003c\/strong\u003e control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003cstrong\u003eGen II mechanical control setups\u003c\/strong\u003e requiring a \u003cstrong\u003e5-foot throttle and shift cable\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with gradual bends and secure it properly to help maintain smooth operation and extend service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 5 feet long, ideal for compact boats and short routing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and regular marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eConfirm correct cable length, route with gradual bends, secure the cable properly, and verify full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935349657891,"sku":"8M0082528","price":40.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_2.png?v=1698793049"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-3-ft-8m0082526","title":"Mercury – Platinum Plus Throttle and Shift Cable 3 Foot | Mechanical Engine Control | 8M0082526","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 3 Foot | Mechanical Engine Control | 8M0082526\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eMercury Platinum Plus Throttle\u003c\/strong\u003e and \u003cstrong\u003eShift Cable (Gen II\u003c\/strong\u003e) is designed for mechanical control systems where smooth operation and precise helm feel are especially important. Built for Mercury Gen II mechanical control applications, it delivers refined, low-effort movement compared to standard control cables. The \u003cstrong\u003e3-foot length\u003c\/strong\u003e is ideal for tight console layouts, close-mounted control boxes, and compact rigging installations where excess cable length is not desired.\u003c\/p\u003e\n\u003cp\u003eProperly functioning control cables help support consistent throttle response and clean shifting over time. Selecting the correct cable length, routing with gradual bends, and performing routine inspection can reduce internal wear and help preserve smooth operation, especially in high-use or demanding marine environments.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed for smoother internal movement and reduced control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Foot Cable Length\u003c\/strong\u003e – Ideal for short routing runs and compact rigging layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 3-foot throttle and shift cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eProper routing with gradual bends and secure fastening is required to maintain smooth operation and extend service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 3 feet long, ideal for tight consoles and short routing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction for smoother movement and reduced control effort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for harsh marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and regular marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eConfirm correct length, route the cable with gradual bends, secure it properly, and verify full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935349985571,"sku":"8M0082526","price":38.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526.png?v=1698793050"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-40-ft-8m0082508","title":"Mercury – Gen I Throttle and Shift Cable 40 Foot | Mechanical Engine Control | 8M0082508","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 40 Foot | Mechanical Engine Control | 8M0082508\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (40 Foot \/ 12.2 m) is designed for boats using traditional Mercury Gen I mechanical control systems where extremely long routing distance is required. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 40-foot length is ideal for wide-beam boats, deep hulls, and long helm-to-engine layouts where maximum distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-Foot (12.2 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and ultra-long control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position.\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation.\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 40-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 40-foot length is ideal for extreme helm-to-engine distances where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350018339,"sku":"8M0082508","price":91.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_29.png?v=1698793051"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-38-ft-8m0082507","title":"Mercury – Gen I Throttle and Shift Cable 38 Foot | Mechanical Engine Control | 8M0082507","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 38 Foot | Mechanical Engine Control | 8M0082507\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (38 Foot \/ 11.6 m) is designed for boats using traditional Mercury Gen I mechanical control systems where very long routing distance is required. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 38-foot length is ideal for wide-beam boats, deep hulls, and long helm-to-engine layouts where added distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38-Foot (11.6 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 38-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 38-foot length is ideal for very long helm-to-engine layouts where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350051107,"sku":"8M0082507","price":89.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_28.png?v=1698793050"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-34-ft-8m0082505","title":"Mercury – Gen I Throttle and Shift Cable 34 Foot | Mechanical Engine Control | 8M0082505","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 34 Foot | Mechanical Engine Control | 8M0082505\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (34 Foot \/ 10.4 m) is designed for boats using traditional Mercury Gen I mechanical control systems where very long routing distance is required. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 34-foot length is ideal for wide-beam boats, deep hulls, and long helm-to-engine layouts where added distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e34-Foot (10.4 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 34-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 34-foot length is ideal for very long helm-to-engine layouts where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350149411,"sku":"8M0082505","price":85.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_26.png?v=1698793050"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-ii-4-ft-8m0082527","title":"Mercury – Platinum Plus Throttle and Shift Cable 4 Foot | Mechanical Engine Control | 8M0082527","description":"\u003ch2\u003eMercury – Platinum Plus Throttle and Shift Cable 4 Foot | Mechanical Engine Control | 8M0082527\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Platinum Plus Throttle and Shift Cable (Gen II) is designed for mechanical control systems where refined feel and smooth operation are especially important. Built for Mercury Gen II mechanical control applications, it delivers a direct mechanical connection with noticeably lighter, smoother movement than standard control cables. The 4-foot length is well suited for tight rigging spaces and short control runs where excess cable length is unnecessary.\u003c\/p\u003e\n\u003cp\u003eProperly sized and routed control cables help support consistent throttle response and clean shifting over time. Selecting the correct length, routing with smooth bends, and performing routine inspection can reduce internal wear and help preserve smooth control feel during everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum Plus Cable Construction\u003c\/strong\u003e – Designed to reduce internal friction and control effort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Foot Cable Length\u003c\/strong\u003e – Ideal for compact layouts and short routing paths\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen II Control Compatibility\u003c\/strong\u003e – Designed specifically for Mercury Generation II mechanical control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Corrosion Resistance\u003c\/strong\u003e – Built to withstand moisture, vibration, and marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical Generation II (Gen II) control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift applications\u003c\/li\u003e\n\u003cli\u003eCompatible with Gen II mechanical control setups requiring a 4-foot throttle and shift cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm control system generation and required cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with smooth bends and secure it properly to help maintain long-term performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003eIt is designed for Mercury Generation II (Gen II) mechanical throttle and shift control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003eThis cable is 4 feet long, ideal for compact consoles and short routing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) What makes Platinum Plus cables different from standard control cables?\u003c\/strong\u003e\u003cbr\u003ePlatinum Plus cables feature refined internal construction that reduces friction and provides smoother, lighter control movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable suitable for marine environments?\u003c\/strong\u003e\u003cbr\u003eYes. It is built with enhanced corrosion resistance to handle moisture, vibration, and regular marine exposure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003eVerify correct cable length, route with smooth bends, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350116643,"sku":"8M0082527","price":38.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082526_1.png?v=1698793050"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-30-ft-8m0082503","title":"Mercury – Gen I Throttle and Shift Cable 30 Foot | Mechanical Engine Control | 8M0082503","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 30 Foot | Mechanical Engine Control | 8M0082503\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (30 Foot \/ 9.1 m) is designed for boats using traditional Mercury Gen I mechanical control systems where maximum routing distance is required. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 30-foot length is ideal for wide-beam boats, deep hulls, and long helm-to-engine layouts where additional distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Foot (9.1 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 30-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 30-foot length is ideal for maximum-distance helm-to-engine layouts where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350182179,"sku":"8M0082503","price":80.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_24.png?v=1698793051"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-36-ft-8m0082506","title":"Mercury – Gen I Throttle and Shift Cable 36 Foot | Mechanical Engine Control | 8M0082506","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 36 Foot | Mechanical Engine Control | 8M0082506\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (36 Foot \/ 11.0 m) is designed for boats using traditional Mercury Gen I mechanical control systems where extra-long routing distance is unavoidable. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 36-foot length is ideal for wide-beam boats, deep hulls, and long helm-to-engine layouts where added distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36-Foot (11.0 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 36-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 36-foot length is ideal for extra-long helm-to-engine layouts where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350247715,"sku":"8M0082506","price":87.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_27.png?v=1698793052"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-28-ft-8m0082501","title":"Mercury – Gen I Throttle and Shift Cable 28 Foot | Mechanical Engine Control | 8M0082501","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 28 Foot | Mechanical Engine Control | 8M0082501\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (28 Foot \/ 8.5 m) is designed for boats using traditional Mercury Gen I mechanical control systems where long routing distance is required. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 28-foot length is ideal for wide-beam boats, deeper hulls, and long helm-to-engine layouts where additional distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28-Foot (8.5 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 28-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 28-foot length is ideal for maximum-distance helm-to-engine layouts where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350280483,"sku":"8M0082501","price":77.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_22.png?v=1698793051"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-26-ft-8m0082499","title":"Mercury – Gen I Throttle and Shift Cable 26 Foot | Mechanical Engine Control | 8M0082499","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 26 Foot | Mechanical Engine Control | 8M0082499\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (26 Foot \/ 7.9 m) is designed for boats using traditional Mercury Gen I mechanical control systems where extended routing distance is required. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 26-foot length is ideal for wide-beam boats, deeper hulls, and long helm-to-engine layouts where additional distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26-Foot (7.9 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 26-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 26-foot length is ideal for maximum-distance helm-to-engine layouts where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350313251,"sku":"8M0082499","price":74.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_20.png?v=1698793051"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-27-ft-8m0082500","title":"Mercury – Gen I Throttle and Shift Cable 27 Foot | Mechanical Engine Control | 8M0082500","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 27 Foot | Mechanical Engine Control | 8M0082500\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (27 Foot \/ 8.2 m) is designed for boats using traditional Mercury Gen I mechanical control systems that require extended routing distance. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 27-foot length is ideal for wide-beam boats, deep hulls, and long helm-to-engine layouts where added distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e27-Foot (8.2 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 27-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 27-foot length is ideal for maximum-distance helm-to-engine layouts where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350346019,"sku":"8M0082500","price":76.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_21.png?v=1698793051"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-29-ft-8m0082502","title":"Mercury – Gen I Throttle and Shift Cable 29 Foot | Mechanical Engine Control | 8M0082502","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 29 Foot | Mechanical Engine Control | 8M0082502\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (29 Foot \/ 8.8 m) is designed for boats using traditional Mercury Gen I mechanical control systems where very long routing runs are required. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 29-foot length is ideal for wide-beam boats, deep hulls, and long helm-to-engine layouts where additional distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29-Foot (8.8 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 29-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 29-foot length is ideal for very long helm-to-engine layouts where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350378787,"sku":"8M0082502","price":79.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_23.png?v=1698793051"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-24-ft-8m0082497","title":"Mercury – Gen I Throttle and Shift Cable 24 Foot | Mechanical Engine Control | 8M0082497","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 24 Foot | Mechanical Engine Control | 8M0082497\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMercury Gen I Throttle\u003c\/strong\u003e and \u003cstrong\u003eShift Cable (24 Foot \/ 7.3 m)\u003c\/strong\u003e is designed for boats using traditional Mercury Gen I mechanical control systems where extra routing length is required. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The \u003cstrong\u003e24-foot length\u003c\/strong\u003e is ideal for wide-beam boats, deeper hulls, and extended console layouts where additional distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Foot (7.3 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position.\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation.\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 24-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 24-foot length is ideal for long helm-to-engine runs where extra routing room helps maintain smooth movement and proper cable support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350444323,"sku":"8M0082497","price":71.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_18.png?v=1698793052"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-32-ft-8m0082504","title":"Mercury – Gen I Throttle and Shift Cable 32 Foot | Mechanical Engine Control | 8M0082504","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 32 Foot | Mechanical Engine Control | 8M0082504\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (32 Foot \/ 9.4 m) is designed for boats using traditional Mercury Gen I mechanical control systems where extra-long routing distance is required. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 32-foot length is ideal for wide-beam boats, deep hulls, and long helm-to-engine layouts where added distance helps keep rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-Foot (9.4 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 32-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 32-foot length is ideal for extra-long helm-to-engine layouts where shorter cables cannot route cleanly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350477091,"sku":"8M0082504","price":83.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_25.png?v=1698793052"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-23-ft-8m0082496","title":"Mercury – Gen I Throttle and Shift Cable 23 Foot | Mechanical Engine Control | 8M0082496","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 23 Foot | Mechanical Engine Control | 8M0082496\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eMercury Gen I Throttle\u003c\/strong\u003e and \u003cstrong\u003eShift Cable (23 Foot \/ 7.0 m)\u003c\/strong\u003e is designed for boats using traditional Mercury Gen I mechanical control systems that require extended routing distance. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The \u003cstrong\u003e23-foot\u003c\/strong\u003e length is ideal for wide-beam boats, deeper hulls, and long helm-to-engine runs where added routing space helps keep the rigging clean, relaxed, and properly supported.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear and prevent stiff or uneven control feel. Replacing a worn cable helps restore consistent throttle and shift response and supports safer docking, maneuvering, and everyday operation.\u003c\/p\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e23-Foot (7.0 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position.\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation.\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 23-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 23-foot length is ideal for long helm-to-engine runs where extra routing room helps maintain smooth movement and proper cable support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350673699,"sku":"8M0082496","price":70.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_17.png?v=1698793052"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-22-ft-8m0082495","title":"Mercury – Gen I Throttle and Shift Cable 22 Foot | Mechanical Engine Control | 8M0082495","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 22 Foot | Mechanical Engine Control | 8M0082495\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eMercury Gen I Throttle\u003c\/strong\u003e and \u003cstrong\u003eShift Cable (22 Foot \/ 6.7 m)\u003c\/strong\u003e is designed for boats using traditional Mercury Gen I mechanical control systems. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The \u003cstrong\u003e22-foot length\u003c\/strong\u003e is ideal for wide-beam boats, deeper hulls, and long helm-to-engine routing where additional reach supports clean, properly supported cable runs.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear. Replacing a worn cable helps restore consistent throttle and shift response and supports safer operation during docking, close-quarters maneuvering, and everyday use.\u003c\/p\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22-Foot (6.7 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position.\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation.\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 22-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 22-foot length is ideal for longer helm-to-engine runs where added reach helps maintain smooth routing and proper cable support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350706467,"sku":"8M0082495","price":68.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_16.png?v=1698793053"},{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-21-ft-8m0082494","title":"Mercury – Gen I Throttle and Shift Cable 21 Foot | Mechanical Engine Control | 8M0082494","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 21 Foot | Mechanical Engine Control | 8M0082494\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable (21 Foot \/ 6.4 m) is designed for boats using traditional Mercury Gen I mechanical control systems. This cable connects the control box to the engine to deliver direct, responsive throttle and shift movement without electronic involvement. The 21-foot length is ideal for wide-beam boats, deeper hulls, and long helm-to-engine routing where added distance supports clean, properly supported cable runs.\u003c\/p\u003e\n\u003cp\u003eMechanical control cables gradually wear as routing points flex, jackets age, and internal liners lose smoothness. Routine inspection for chafing, tight bends, corrosion at end fittings, and secure mounting can help reduce premature wear. Replacing a worn cable helps restore consistent throttle and shift response and supports safer operation during docking, close-quarters maneuvering, and everyday use.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Throttle \u0026amp; Shift Operation\u003c\/strong\u003e – Delivers direct control movement without electronic delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e21-Foot (6.4 m) Cable Length\u003c\/strong\u003e – Supports clean routing in larger hulls and extended control layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen I Control Interface\u003c\/strong\u003e – Designed for early Mercury mechanical control assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Built to handle vibration, moisture, and everyday marine exposure\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eGen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift setups\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control platforms\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eVerify correct cable length based on routing distance and helm position\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends, pinch points, and heat exposure during installation\u003c\/li\u003e\n\u003cli\u003eProper adjustment is required for smooth operation and long service life\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What does a Gen I throttle and shift cable do?\u003c\/strong\u003e\u003cbr\u003eIt transfers throttle and shift movement from the control box to the engine using a mechanical cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When should a throttle and shift cable be replaced?\u003c\/strong\u003e\u003cbr\u003eReplace the cable if you notice stiffness, delayed response, corrosion at fittings, or inconsistent shifting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Why choose a 21-foot cable?\u003c\/strong\u003e\u003cbr\u003eThe 21-foot length is ideal for longer helm-to-engine runs where additional reach helps maintain smooth routing and proper cable support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this cable compatible with newer Gen II or Gen II+ controls?\u003c\/strong\u003e\u003cbr\u003eNo. This cable is designed specifically for Gen I mechanical control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury control cable?\u003c\/strong\u003e\u003cbr\u003eOEM cables are built to Mercury specifications, helping ensure proper fit, smooth movement, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935350772003,"sku":"8M0082494","price":67.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0082479_15.png?v=1698793053"}],"url":"https:\/\/partsvu.com\/collections\/mercury-marine-mechanical-throttle-shift-cables.oembed","provider":"PartsVu","version":"1.0","type":"link"}