These Yamaha fuel additives and fogging oils made by Yamalube are formulated to help prevent fuel oxidation and phase separation from moist, rich air. When used continuously, these Yamalube fuel additives and fogging oils keep fuel fresh and Yamaha outboards free of buildup during off-season storage.
Maintain your Yamaha outboard's reliability with Yamalube’s innovative fuel additives and fogging oils. Designed to combat the adverse effects of moist environments, Yamaha fuel additives guarantee that engines remain in top condition throughout the year. By preventing fuel degradation and buildup, they enhance longevity and performance. Choose Yamalube for unmatched protection and rely on PartsVu to support your maintenance needs, making off-season preparation effortless and effective.
All Categories
Yamaha
Yamaha - Yamalube Outboard Ring Free Plus Fuel Additive - 32 oz - ACC-RNGFR-PL-32
$75.41$81.35Unit price /UnavailableYamaha
Yamaha - Yamalube Outboard Ring Free Plus Fuel Additive - 12 oz - ACC-RNGFR-PL-12
$23.62$25.40Unit price /UnavailableYamaha
Yamaha - Yamalube Fuel Stabilizer and Conditioner Plus - 32 oz. Bottle - ACC-FSTAB-PL-32
$12.49$12.75Unit price /UnavailableYamaha
Yamaha - Yamalube EFI Engine Storage Fogging Oil - 32 OZ. - ACC-STORR-IT-32
$10.02$10.80Unit price /UnavailableYamaha
Yamaha - Yamalube Stor-Rite Engine Fogging Oil - 12 oz. - ACC-STORE-RI-TE
$9.70$9.99Unit price /UnavailableYamaha
Yamaha - Fuel Stabilizer and Conditioner Plus - 32 oz. Bottles - Case of 6 - ACC-FSTAB-PL-32
$74.94Unit price /UnavailableYamaha
Yamaha - Yamalube Outboard Ring Free Plus Fuel Additive - 32 oz. - 2-Pack - ACC-RNGFR-PL-32
$150.82Unit price /UnavailableYamaha
Yamaha - Yamalube Fuel Stabilizer and Conditioner Plus - 32 oz. Bottle - 2-Pack - ACC-FSTAB-PL-32
$24.98Unit price /UnavailableYamaha
Yamaha - Yamalube Outboard Ring Free Plus Fuel Additive - 12 oz - 2-Pack - ACC-RNGFR-PL-12
$47.24Unit price /UnavailableYamaha
Yamaha - Yamalube Fuel Stabilizer and Conditioner Plus - 12 oz. Bottle - ACC-FSTAB-PL-12
$5.90$6.35Unit price /UnavailableYamaha
Yamaha - Yamalube Outboard Ring Free Plus Fuel Additive - 4-Pack - 12 oz - ACC-RNGFR-PL-12
$94.48Unit price /UnavailableYamaha
Yamaha - Fuel Stabilizer and Conditioner Plus - 12oz Bottle - 4-Pack - ACC-FSTAB-PL-12
$23.60Unit price /UnavailableYamaha
Yamaha - Yamalube Stor-Rite Engine Fogging Oil - 12 oz. - 2-Pack - ACC-STORE-RI-TE
$19.40Unit price /UnavailableYamaha
Yamaha - Yamalube Fuel Stabilizer and Conditioner Plus - 12 oz. Bottle - 2-Pack - ACC-FSTAB-PL-12
$11.80Unit price /UnavailableYamaha
Yamaha - Yamalube Outboard Ring Free Plus Fuel Additive - 32 oz - Case of 6 - ACC-RNGFR-PL-32
$452.46Unit price /UnavailableYamaha
Yamaha - Yamalube EFI Engine Storage Fogging Oil - 32 oz. - 2-Pack - ACC-STORR-IT-32
$20.04Unit price /UnavailableYamaha
Yamaha - Yamalube Outboard Ring Free Plus Fuel Additive - 12-Pack - 12 oz - ACC-RNGFR-PL-12
$283.44Unit price /UnavailableYamaha
Yamaha - Fuel Stabilizer and Conditioner Plus - 12 oz. Bottle- 12-Pack - ACC-FSTAB-PL-12
$70.80Unit price /UnavailableYamaha
Yamaha - Yamalube Stor-Rite Engine Fogging Oil - 12 oz. - 4-Pack - ACC-STORE-RI-TE
$38.80Unit price /UnavailableYamaha
Yamaha - Yamalube Stor-Rite Engine Fogging Oil - 12 oz. - 12-Pack - ACC-STORE-RI-TE
$116.40Unit price /Unavailable
Yamalube Fuel Additives and Fogging Oils - Resources and Information
These Yamalube fuel additives and Yamalube Fogging Oils are formulated to help prevent fuel oxidation and phase separation from moist, rich air. When used continuously, Yamaha fuel additives and fogging oils from Yamalube keep fuel fresh and Yamaha outboards free of buildup during off-season storage.
PartsVu.com’s selection of certified Yamalube fuel additives and fogging oils are perfect for keeping your Yamaha outboard engine in peak performance condition, even in the off-season. Our Yamaha fuel treatments come in single bottles or multipacks, so you can save money by buying in bulk.
We stock a complete range of Yamaha outboard parts to service your Yamaha outboard engine. Looking for other Yamalube products? Browse our pages for our selection of Yamalube marine motor oil, Yamaclean and Yamabond products, Yamalube marine grease, and more!
We also regularly release new, helpful resources for items like:
Yamalube Fuel Additives and Fogging Oils FAQs
How do I fog my Yamaha outboard engine?
Before fogging your Yamaha outboard engine, you’ll need the following:
-
Fogging oil
-
Crescent wrench
-
Motor flusher
-
Garden hose
-
Water supply
So, what is fogging oil or fogging fluid anyway? Yamalube fogging oil is a wax-based oil that coats the engine and prevents corrosion. As you work through this process, you will soon understand why this process is called fogging the engine as there will be plenty of white smoke.
Since you will not be in the water while performing this task, you will need to use a motor flusher to empty salt water to keep the engine cool while you complete the fogging process. Follow the Flush Your Outboard with the Engine Running procedures detailed above.
If applicable, remove your engine’s air cleaner to get to the carburetors or cylinder air intakes.
Rev the engine to a bit above idle, and with the engine running, spray the fogging oil into the carburetor(s) or air intake of each cylinder.
Continuously spray fogging oil into your engine’s carburetors or cylinder air intake until the engine stalls. Be sure to spray a coating of fogging oil into each cylinder or carburetor. Don’t spray too much oil at once and kill the engine immediately, but after a continuous spray, the engine will eventually stall. This is precisely what you want, and the ultimate stalling indicates that the engine is thoroughly covered with fogging oil.
Next, use your crescent wrench to remove the spark plugs and spray fogging oil into each cylinder. Turn the flywheel to move the cylinders allowing you to coat the entire cylinder wall. Rather than turning the flywheel to move the cylinders, you can also simply start the engine for just a few seconds to allow the fogging oil to coat the cylinder walls–repeat this process a couple of times for good measure. Replace old spark plugs with new spark plugs so that you are ready to go in the spring.
How do you fog a Yamaha outboard motor? Quick Guide
Here are the steps for Fogging a Yamaha outboard motor for shipping::involves using a specialized fogging spray to protect the engine during storage and shipping. :
-
Start the engine and let it idle until it reaches normal operating temperature.
-
Turn off the fuel supply or disconnect the fuel line to prevent the engine from running out of fuel while fogging.
-
Remove the spark plugs using a spark plug wrench and spray a small amount of Yamalube fogging oil into each cylinder. Use the straw attachment to direct the spray into the spark plug holes.
-
Slowly turn the flywheel several times to distribute the fogging oil throughout the cylinders.
-
Replace the spark plugs and tighten them to the manufacturer's recommended torque.
-
Spray a light coat of fogging oil over the engine's exterior surfaces, such as the carburetor, throttle linkage, and other metal parts.
-
Finally, turn off the engine and store it in a dry, cool place away from direct sunlight.
Fogging your Yamaha outboard motor is an important step in maintaining its performance and prolonging its lifespan.
How do I stabilize the fuel system of my Yamaha outboard motor?
Before stabilizing the fuel system of your Yamaha outboard engine, you’ll need the following::
-
Fuel stabilizer suitable for long-term storage
-
Motor flusher
-
Garden hose
-
Water supply
Because it is so common, many of us use ethanol-enriched gasoline much of the time. We recommend using a fuel stabilizer all of the time when running ethanol-enriched gasoline. Read our Ethanol Gasoline In Outboard Engines article to learn why. Additionally, it is vital to use a fuel stabilizer like Yamaha Fuel Stabilizer and Conditioner Plus when your boat will be sitting unused for any more than two or three months.
Add the amount of fuel stabilizer directed on the product’s packing to your fuel—for instance, 1 ounce of Yamaha Fuel Stabilizer and Conditioner Plus for every gallon of gasoline, assuming the engine will be stored for more than 2 months. If you are storing the engine for 2 months or less, the suggested ratio from Yamaha is 1 ounce of stabilizer for every 3 gallons of gasoline.
Run the engine with stabilized fuel for 10-15 minutes to thoroughly circulate the stabilized fuel throughout your fuel system. If your boat is out of the water, follow the Flush Your Outboard with the Engine Running procedures detailed above.
Why is my Yamaha outboard fuel system important?
The fuel system is composed of the fuel pump, fuel filter, check valves, fuel hoses, fuel pump diaphragm, and injectors. Listen for the operation sound. If you can’t hear the system attempting to work, check for continuity between the fuse holder, fuse, fuel pump relay, and wiring harness. Repair or replace the defective part(s) if there is no continuity. If there is continuity, replace the electrical fuel pump. If you hear the operation sound, check each part of the fuel system individually.
First, inspect the Yamaha fuel filters and look for clogs, cracks, kinks, or leaks in the hoses. Replace any parts with damage. Next, check the diaphragm for cracks or other signs of damage. Then, check the vapor separator needle valve for bends or signs of wear. The next step is to check the injectors for clogs and resistance. Then, check for poor connections.
Finally, note if there is any water in the fuel. Ethanol gasoline attracts water, which negatively impacts the combustibility of the fuel. This is especially likely if you haven’t used fuel additives or stabilizers. Water in the fuel may also cause a bad or failing fuel pump. If you find water in your fuel, you may want to check that the pump is in good condition.
You can perform a Yamaha outboard fuel pump test by removing the spark plug wire boot from the spark plug and then removing the spark plug with a plug socket and wrench. Attach a compression gauge into the spark plug socket. If you have an electric motor, you may need a second person to crank your engine over while you twist your throttle position open. Otherwise, you can push the throttle open with one hand and pull the rope start.
Why is a proper Yamaha outboard season breakout important?
At the start of a boating season, we highly recommend going through the proper Yamaha outboard season breakout steps. We’ve all experienced that there are two different kinds of people at the launch ramp: those who are prepared, and those who are not. You don’t want to be the person to get your family and friends excited for a long-awaited trip on the water, only to disappoint because your engine won’t startup. Doing some simple maintenance on your Yamaha outboard before breaking out your boat will save you from a lot of embarrassment and wasted time.
How do I perform a Yamaha outboard season breakout?
1 – Add Yamaha Ring Free to your fuel tank and top off the gas. There are differing thoughts on filling the fuel tank before storage. Whatever your approach, good fuel treatment at the start of the season is important. PartsVu recommends Ring Free and Yamaha Fuel Stabilizer and Conditioner with every fuel up, especially if ethanol fuel is being used.
2 – Check the fuel system connections for leaks and the fuel hoses for softness or brittleness. Replace if needed.
3 – Check the grounding cables on the engine mounting bracket for breakage or corrosion. Clean them if necessary.
4 – Charge your batteries, and reconnect the battery cables if you disconnected them before storage. A trickle charge is always the best way to preserve the life of your battery during storage. Yamaha Battery Terminal Cleaner and Protector is extremely helpful to remove corrosive build-up on battery terminal posts to help increase power output and extend battery life.
5 – Check your propeller. Remove the propeller, use Yamaha Marine Grease and check that the lower unit seal is not compromised.
6 – Inspect for any leaks out of the lower unit. Yamaha Gear Lube Kits help you to properly maintain your lower unit.
7 – Steering – move the steering wheel, checking for free movement through the full range.
-
Mechanical Cables – grease the ends of the cable where it connects to the helm and to the engine.
-
Hydraulic – check for any hydraulic oil leaks, examine the hose, especially hoses by the engine and cylinders. Add marine hydraulic steering fluid as needed.
-
Power-Assisted Systems – check for any leaks, examine hoses, check/fill reservoir.
8 – If your outboard is equipped with a power trim and tilt system, check that its operation is functioning as it should. Look for any fluid seepage around the piston seals and reseal/replace as needed.
9 – Test run the motor before launching the boat, burning off any fogging oils or other storage elements introduced into the engine. This provides an opportunity for you to check all of the gauges, electronics/navigation systems, examine for leaks, and verify overall operating functionality before your first trip. (When running your engine out of water, the team at PartsVu recommends using engine flushing earmuffs for the lower unit).
How do I protect the cylinder walls of my Yamaha outboard engine?
To protect the cylinder walls of your Yamaha outboard engine, follow these steps:
-
Use high-quality, recommended engine oil for your outboard engine. Yamalube is a good choice for Yamaha engines.
-
Change the engine oil and filter regularly according to the manufacturer's recommended schedule.
-
Use fuel stabilizers and quality fuel to avoid corrosion and deposit build-up in the fuel system.
-
Use the engine within the recommended RPM range to avoid over-revving and overheating.
-
Use high-quality air filters and replace them when they become clogged or dirty.
-
Avoid running the engine with a lean fuel mixture, which can cause engine damage.
-
Keep the engine clean and well-maintained, and check it regularly for signs of wear or damage.
By following these steps, you can help protect the cylinder walls and ensure the longevity of your Yamaha outboard engine.
What are EFI engines?
EFI stands for Electronic Fuel Injection. EFI engines use electronic sensors to measure engine parameters such as air intake, temperature, and throttle position to deliver the optimal amount of fuel to the engine. This provides better fuel efficiency and more precise engine performance than traditional carbureted engines. EFI engines are commonly used in modern vehicles, including many outboard motors.
How do you use Yamalube fogging spray?
Yamalube fogging spray is used to protect the internal metal surfaces of the outboard motor from rust and corrosion during storage. Here are the steps to use it:
-
Start by removing the spark plug from the outboard motor.
-
Shake the can of Yamalube fogging spray well before use.
-
Spray the fogging spray into the spark plug hole for 5-10 seconds or until a visible cloud of fog appears from the exhaust.
-
Next, spray the fogging spray directly into the carburetor while the engine is running. You can use the straw that comes with the can to direct the spray.
-
After spraying the fogging spray, stop the engine and reinstall the spark plug.
-
Finally, cover the outboard motor with a storage cover to protect it from dust and moisture.
It is important to follow the instructions on the can carefully and to use the fogging spray in a well-ventilated area.
How much Yamalube fuel stabilizer per gallon of gas?
The amount of Yamalube fuel stabilizer needed per gallon of gas can vary depending on the specific product and the level of fuel stabilization desired. However, as a general guideline, most Yamalube fuel stabilizers recommend using one ounce of stabilizer per gallon of fuel. It is always best to follow the instructions on the product label for the specific product and stabilizer being used.
Can I use synthetic oil in my Yamaha outboard?
Yes, synthetic oil can be used in Yamaha outboard motors as long as it meets the recommended oil specifications for the specific model and year of the engine. However, it is important to note that not all synthetic oils are suitable for use in outboard motors, and it is recommended to use a marine-specific synthetic oil for the best performance and protection. Consult the owner's manual or a Yamaha dealer for specific recommendations.
What's the best fuel additive for 4 stroke outboard engines made by Yamaha?
Yamalube Fuel Stabilizer and Conditioner Plus is a recommended fuel additive for Yamaha 4 stroke outboard engines. It helps prevent fuel oxidation and phase separation, which can lead to engine damage and poor performance. It also helps keep fuel injectors and carburetors clean for optimal engine performance. Other recommended fuel additives for Yamaha outboard engines include Yamaha Ring Free Plus and Yamaha Fuel Conditioner & Stabilizer.
What's the best Yamaha ring free alternative?
Yamaha Ring Free Fuel Additive is a fuel system cleaner and conditioner that is designed to help remove deposits and prevent carbon buildup in the fuel system of Yamaha outboard engines. If you are looking for an alternative to Yamalube Ring Free, there are several options available that can provide similar benefits.
One option is Sea Foam Motor Treatment, which is a versatile fuel additive that can be used in gasoline and diesel engines, including marine engines. It helps clean and lubricate the fuel system, as well as reduce carbon buildup and emissions.
Another alternative is Chevron Techron Concentrate Plus Fuel System Cleaner, which is designed to clean and protect the fuel system, as well as reduce emissions and improve fuel economy. It can be used in all types of gasoline engines, including marine engines.
There are many other fuel system cleaners and conditioners available on the market, but it is important to choose one that is compatible with your Yamaha outboard engine and follow the manufacturer's recommendations for use. It is also important to maintain a regular maintenance schedule and use high-quality fuel to keep your engine running smoothly.
What are Yamaha outboard low pressure fuel pump symptoms?
The low-pressure fuel pump in a Yamaha outboard motor delivers fuel from the gas tank to the high-pressure fuel pump. Some of the common symptoms of a failing low-pressure fuel pump in a Yamaha outboard include:
-
Difficulty starting the engine: A failing low-pressure fuel pump may not be able to provide enough fuel to start the engine, causing starting problems.
-
Engine stalling: When the low-pressure fuel pump is not functioning properly, the engine may stall or die suddenly, especially at low speeds or idling.
-
Loss of power: A failing low-pressure fuel pump may not be able to provide sufficient fuel to the high-pressure fuel pump, leading to a loss of engine power.
-
Rough idling: If the fuel pump is not delivering fuel properly, the engine may idle roughly or unevenly.
-
Engine hesitation: A failing fuel pump may cause the engine to hesitate or sputter when accelerating or under load.
If you experience any of these symptoms, it is recommended to have your Yamaha outboard inspected by a certified mechanic to diagnose and fix the problem.
What are the most common Yamaha 4 stroke outboard fuel pump problems?
Some of the most common fuel pump problems in stock Yamaha 4 stroke outboard engines include:
-
Clogged fuel filter: A clogged fuel filter can prevent fuel from reaching the engine, resulting in poor performance or engine stalling.
-
Fuel contamination: If the fuel tank has been contaminated with dirt or water, it can cause blockages in the fuel pump or damage the fuel pump components.
-
Worn fuel pump components: Over time, the fuel pump components such as the diaphragm, check valves, or seals can wear out, resulting in fuel pump failure or reduced performance.
-
Electrical issues: Electrical problems such as a faulty fuel pump relay or wiring issues can also cause fuel pump problems in Yamaha 4 stroke outboards.
-
Fuel pressure issues: If the fuel pressure is too low or too high, it can affect the performance of the fuel pump and cause engine problems.
It is recommended to have regular maintenance checks on the fuel system and fuel pump to avoid these issues and keep the engine running smoothly.
What's the recommended fuel for Yamaha 4 stroke outboard engines?
Yamaha recommends the use of gasoline with a minimum octane rating of 87 (R+M/2 method) for their 4-stroke outboard engines. They also recommend the use of fuel that contains no more than 10% ethanol (E10) or 5% methanol. It is important to use clean, fresh fuel and to follow the manufacturer's fuel recommendations to ensure optimal performance and engine longevity.
Why is my Yamaha outboard not getting fuel?
There are several possible reasons why your Yamaha outboard may not be getting fuel:
-
Clogged Fuel Filter: The fuel filter may be clogged, preventing fuel from flowing to the engine. The fuel filter should be checked and replaced if necessary.
-
Dirty Carburetor: The carburetor may be dirty or clogged, preventing fuel from reaching the engine. The carburetor should be cleaned and inspected for any damage.
-
Fuel Pump Issues: The fuel pump may be malfunctioning, preventing fuel from reaching the carburetor. The fuel pump should be checked for proper operation.
-
Faulty Fuel Lines: The fuel lines may be cracked or damaged, causing fuel to leak or preventing fuel from flowing properly. The fuel lines should be inspected and replaced if necessary.
-
Electrical Issues: Electrical problems, such as a faulty ignition system or a bad sensor, can also cause the engine to not receive fuel. These electrical system issues should be diagnosed and repaired by a qualified technician.
It is important to address any fuel delivery issues as soon as possible to prevent damage to the engine and ensure reliable operation. If you are unsure of the cause of the problem, it is recommended to consult a qualified technician for diagnosis and repair.
What is fogging oil used for?
Fogging oil is a type of oil that is used to protect engines and other machinery from corrosion during periods of storage or non-use. It is typically sprayed into the engine's cylinders, <