{"product_id":"permatex-fuel-tank-repair-kit-1-oz-84334","title":"Permatex - Fuel Tank Repair Kit - 1 oz. - 84334","description":"\u003cp\u003e\u003cstrong\u003ePermatex - Fuel Tank Repair Kit \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEliminates dangerous welding. Complete kit contains everything required for making professional-quality permanent repairs in just minutes. Includes state-of-the-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks. It repairs cracks up to 4\" (10cm) long and holes up to 3\/8\" (9mm) in diameter. Repair will be complete when the resin cures in 30 minutes.\u003c\/p\u003e\n\u003cp\u003eTank may be refilled after 30 minutes or when the repair is tack free. Repairs can be made ideally at temperatures from 50° F to 75° F (10° C to 24° C). Repairs made at lower temperatures will take longer to cure. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize - 1 oz.\u003c\/li\u003e\n\u003cli\u003eTwo part, hand kneadable, putty type epoxy stick\u003c\/li\u003e\n\u003cli\u003eUsed for repairing metal gas tanks and containers\u003c\/li\u003e\n\u003cli\u003eContrasting colored materials are mixed together to form a uniform color to indicate thorough mixing\u003c\/li\u003e\n\u003cli\u003eCured adhesive can be drilled, sanded, threaded or filed\u003c\/li\u003e\n\u003cli\u003eResistant to fuels and most solvents after full cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstruction:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTHIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS. The repair resin is designed to begin to harden within 8 – 10 minutes and cures in 30 minutes. Read all directions before beginning repair. Repairs can be made ideally at temperatures from 50°F to 75°F (10°C to 25°C). Repairs made at lower temperatures will take longer to cure. Repairs can be made on slow leaking cracks up to 4 inches in length and holes up to 3\/8 inch in diameter.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove gas cap to vent tank. Make sure there is adequate ventilation.\u003c\/li\u003e\n\u003cli\u003eIf leak is large, drain tank or reduce liquid level to at least 2 inches below the damaged area.\u003c\/li\u003e\n\u003cli\u003ePrepare damaged area by removing any oil, grease, tar or dirt, etc. from repair area. A\u003c\/li\u003e\n\u003cli\u003eSand the affected area to at least 1 inch beyond the damage. Clean area with alcohol swab. B,C\u003c\/li\u003e\n\u003cli\u003eBreak off the appropriate size piece of putty and place over the leak. D\u003c\/li\u003e\n\u003cli\u003eCut the fiberglass cloth to fit within the sanded area.\u003c\/li\u003e\n\u003cli\u003eThe resin must be mixed and applied in less than 8 minutes as the resin will begin to harden. Mix the resin as follows: Burst the seam that separates the two materials by applying pressure to one side. Knead the contents of the pouch back and forth until the mixture is of uniform color (mix for 2 minutes maximum).\u003c\/li\u003e\n\u003cli\u003eCut off the top of the pouch and dispense some of the resin mixture onto the damaged area.\u003c\/li\u003e\n\u003cli\u003eSpread the resin mixture in a uniform layer with the supplied brush onto the area to be covered by the fiberglass. (Note: The material will become warm to touch.) E\u003c\/li\u003e\n\u003cli\u003ePlace the fiberglass over the resin covered area. Spread the remaining mixture over the fiberglass until it is completely saturated. F,G\u003c\/li\u003e\n\u003cli\u003eTaper the edges of the repair area beyond the fiberglass. Smooth the repaired area with the brush.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRepair will be complete when the resin cures in 30 minutes. Tank may be refilled after 30 minutes or when the repair is tack free.\u003c\/p\u003e","brand":"PERMATEX","offers":[{"title":"Default Title","offer_id":48046621327651,"sku":"PV747626","price":13.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/permatex-84334-fuel-tank-epoxy-putty-1.png?v=1713387841","url":"https:\/\/partsvu.com\/en-au\/products\/permatex-fuel-tank-repair-kit-1-oz-84334","provider":"PartsVu","version":"1.0","type":"link"}