{"title":"Mechanical Control Boxes","description":null,"products":[{"product_id":"mercury-aeu-side-mount-remote-control-amp-connector-aeu-15-ft-harness-fits-my2005-newer-8-9-9-15-20-hp-fourstroke-outboards-8m0103451","title":"Mercury – Side Mount Mechanical Control Box, Non-Trim | Mechanical Throttle and Shift Control | 8M0103451","description":"\u003cp data-start=\"0\" data-end=\"109\"\u003e\u003cstrong data-start=\"0\" data-end=\"109\"\u003eMercury – Side Mount Mechanical Control Box, Non-Trim | Mechanical Throttle and Shift Control | 8M0103451\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"111\" data-end=\"123\"\u003eOverview\u003c\/h3\u003e\n\u003cp data-start=\"124\" data-end=\"527\"\u003eThis is a straightforward side mount mechanical control built for smaller Mercury FourStroke outboards that don’t use power trim. It’s the kind of control you install once and then forget about because it just works. The non-trim handle keeps things simple, clean, and predictable at the helm. Ideal for skiffs, tiller conversions, and compact consoles where reliability matters more than extra buttons.\u003c\/p\u003e\n\u003ch3 data-start=\"529\" data-end=\"545\"\u003eKey Features\u003c\/h3\u003e\n\u003cp data-start=\"546\" data-end=\"985\"\u003e• \u003cstrong data-start=\"548\" data-end=\"575\"\u003eNon-Trim Control Handle\u003c\/strong\u003e – Designed for engines without power trim to keep operation simple and direct.\u003cbr data-start=\"654\" data-end=\"657\"\u003e• \u003cstrong data-start=\"659\" data-end=\"694\"\u003eIntegrated Fifteen Foot Harness\u003c\/strong\u003e – Allows direct engine connection without an adapter harness on supported models.\u003cbr data-start=\"776\" data-end=\"779\"\u003e• \u003cstrong data-start=\"781\" data-end=\"821\"\u003eMechanical Shift and Throttle Action\u003c\/strong\u003e – Delivers direct, cable-driven control with a natural feel.\u003cbr data-start=\"882\" data-end=\"885\"\u003e• \u003cstrong data-start=\"887\" data-end=\"915\"\u003eSide Mount Configuration\u003c\/strong\u003e – Mounts cleanly to consoles or side panels for compact helm layouts.\u003c\/p\u003e\n\u003ch3 data-start=\"987\" data-end=\"1018\"\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cp data-start=\"1019\" data-end=\"1312\"\u003e• Mercury FourStroke 8.9 horsepower\u003cbr data-start=\"1054\" data-end=\"1057\"\u003e• Mercury FourStroke 9.9 horsepower\u003cbr data-start=\"1092\" data-end=\"1095\"\u003e• Mercury FourStroke 15 horsepower\u003cbr data-start=\"1129\" data-end=\"1132\"\u003e• Mercury FourStroke 20 horsepower\u003cbr data-start=\"1166\" data-end=\"1169\"\u003e• Mechanical control system\u003cbr data-start=\"1196\" data-end=\"1199\"\u003e• Electric start, non-trim engines\u003cbr data-start=\"1233\" data-end=\"1236\"\u003e• GEN I control cables\u003cbr data-start=\"1258\" data-end=\"1261\"\u003e• GEN II control cables\u003cbr data-start=\"1284\" data-end=\"1287\"\u003e• SAE PR control cables\u003c\/p\u003e\n\u003ch3 data-start=\"1314\" data-end=\"1350\"\u003ePerformance \u0026amp; Practical Benefits\u003c\/h3\u003e\n\u003cp data-start=\"1351\" data-end=\"1731\"\u003eOn the water, this control feels steady and predictable with no excess play in the handle. Throttle engagement is smooth, and shifting stays clean even after long days of stop-and-go running. There’s nothing electronic to lag or confuse the feel, which makes docking and slow-speed maneuvering more natural. It’s a practical setup for boaters who value simplicity and consistency.\u003c\/p\u003e\n\u003ch3 data-start=\"1733\" data-end=\"1748\"\u003eWhy Buy OEM\u003c\/h3\u003e\n\u003cp data-start=\"1749\" data-end=\"2021\"\u003eOEM controls are matched to Mercury throttle curves and shift geometry, so everything moves the way the engine expects. Cable travel stays correct, communication stays clean, and long-term wear is predictable. That’s why techs trust OEM when reliability matters over time.\u003c\/p\u003e\n\u003ch3 data-start=\"2023\" data-end=\"2031\"\u003eFAQs\u003c\/h3\u003e\n\u003cp data-start=\"2032\" data-end=\"2175\"\u003e\u003cstrong data-start=\"2032\" data-end=\"2076\"\u003eHow do I know I need a non-trim control?\u003c\/strong\u003e\u003cbr data-start=\"2076\" data-end=\"2079\"\u003eIf your engine does not have power trim, this handle eliminates unused trim switches and wiring.\u003c\/p\u003e\n\u003cp data-start=\"2177\" data-end=\"2291\"\u003e\u003cstrong data-start=\"2177\" data-end=\"2219\"\u003eDoes this control require calibration?\u003c\/strong\u003e\u003cbr data-start=\"2219\" data-end=\"2222\"\u003eNo calibration is required for mechanical throttle and shift systems.\u003c\/p\u003e\n\u003cp data-start=\"2293\" data-end=\"2416\"\u003e\u003cstrong data-start=\"2293\" data-end=\"2332\"\u003eIs this suitable for saltwater use?\u003c\/strong\u003e\u003cbr data-start=\"2332\" data-end=\"2335\"\u003eYes, when properly installed and maintained like any standard mechanical control.\u003c\/p\u003e\n\u003cp data-start=\"2418\" data-end=\"2557\"\u003e\u003cstrong data-start=\"2418\" data-end=\"2450\"\u003eIs installation complicated?\u003c\/strong\u003e\u003cbr data-start=\"2450\" data-end=\"2453\"\u003eInstallation is straightforward for anyone familiar with mechanical control cables and side mount boxes.\u003c\/p\u003e\n\u003cp data-start=\"2559\" data-end=\"2721\"\u003e\u003cstrong data-start=\"2559\" data-end=\"2616\"\u003eWhat happens when a control like this starts to fail?\u003c\/strong\u003e\u003cbr data-start=\"2616\" data-end=\"2619\"\u003eYou’ll usually notice stiffness, delayed throttle response, or rough shifting before complete failure.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935289725219,"sku":"8M0103451","price":455.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0103452_5.jpg?v=1698792796"},{"product_id":"mercury-conversion-kit-889246a80","title":"Mercury – Remote Kit | 889246A80","description":"\u003ch2 data-start=\"186\" data-end=\"224\"\u003eMercury – Remote Kit | 889246A80\u003c\/h2\u003e\n\u003cp data-start=\"225\" data-end=\"307\"\u003eMechanical Control Conversion Hardware | Manual-Start Tiller to Remote Application\u003c\/p\u003e\n\u003cp data-start=\"309\" data-end=\"710\"\u003eThe Mercury Remote Kit is an OEM, factory-style solution for converting select Mercury FourStroke manual-start tiller outboards to a remote mechanical control configuration. Designed for small console or side-mount layouts, this kit supports removing the tiller handle and transitioning throttle and shift operation to a helm-mounted mechanical control box for a cleaner, more organized rigging setup.\u003c\/p\u003e\n\u003cp data-start=\"712\" data-end=\"1063\"\u003eUsing a dedicated OEM conversion kit helps maintain proper control geometry after the transition from tiller steering. When installed with correct cable selection and adjustment, this kit supports predictable throttle and shift response, consistent cable travel, and reliable operation during everyday use, including docking and low-speed maneuvering.\u003c\/p\u003e\n\u003chr data-end=\"469\" data-start=\"466\"\u003e\n\u003ch3 data-start=\"1065\" data-end=\"1081\"\u003eKey Features\u003c\/h3\u003e\n\u003cul data-start=\"1082\" data-end=\"1498\"\u003e\n\u003cli data-start=\"1082\" data-end=\"1217\"\u003e\n\u003cp data-start=\"1084\" data-end=\"1217\"\u003e\u003cstrong data-start=\"1084\" data-end=\"1115\"\u003eTiller to Remote Conversion\u003c\/strong\u003e – Supports converting manual-start tiller outboards to remote mechanical throttle and shift control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1218\" data-end=\"1308\"\u003e\n\u003cp data-start=\"1220\" data-end=\"1308\"\u003e\u003cstrong data-start=\"1220\" data-end=\"1250\"\u003eManual-Start Compatibility\u003c\/strong\u003e – Designed for non-electric start engine configurations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1309\" data-end=\"1401\"\u003e\n\u003cp data-start=\"1311\" data-end=\"1401\"\u003e\u003cstrong data-start=\"1311\" data-end=\"1341\"\u003eMechanical Control Systems\u003c\/strong\u003e – Built for cable-driven throttle and shift installations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1402\" data-end=\"1498\"\u003e\n\u003cp data-start=\"1404\" data-end=\"1498\"\u003e\u003cstrong data-start=\"1404\" data-end=\"1430\"\u003eFactory-Style Geometry\u003c\/strong\u003e – Intended to support proper linkage alignment and control travel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"469\" data-start=\"466\"\u003e\n\u003ch3 data-start=\"1500\" data-end=\"1531\"\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul data-start=\"1532\" data-end=\"1611\"\u003e\n\u003cli data-start=\"1532\" data-end=\"1564\"\u003e\n\u003cp data-start=\"1534\" data-end=\"1564\"\u003eMercury FourStroke outboards\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1565\" data-end=\"1589\"\u003e\n\u003cp data-start=\"1567\" data-end=\"1589\"\u003eManual-start engines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1590\" data-end=\"1611\"\u003e\n\u003cp data-start=\"1592\" data-end=\"1611\"\u003eCarbureted models\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1613\" data-end=\"1717\"\u003eCommonly used on \u003cstrong data-start=\"1630\" data-end=\"1668\"\u003e9.9 HP, 15 HP, and 20 HP outboards\u003c\/strong\u003e using \u003cstrong data-start=\"1675\" data-end=\"1716\"\u003emechanical throttle and shift systems\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr data-end=\"469\" data-start=\"466\"\u003e\n\u003ch3 data-start=\"1719\" data-end=\"1738\"\u003eImportant Notes\u003c\/h3\u003e\n\u003cul data-start=\"1739\" data-end=\"1999\"\u003e\n\u003cli data-start=\"1739\" data-end=\"1803\"\u003e\n\u003cp data-start=\"1741\" data-end=\"1803\"\u003eFitment can vary by engine family and rigging configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1804\" data-end=\"1880\"\u003e\n\u003cp data-start=\"1806\" data-end=\"1880\"\u003eConfirm exact outboard model and existing control setup before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1881\" data-end=\"1999\"\u003e\n\u003cp data-start=\"1883\" data-end=\"1999\"\u003eInstallation typically requires standard mechanical cable adjustment and careful linkage alignment during rigging.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"469\" data-start=\"466\"\u003e\n\u003ch3 data-start=\"2001\" data-end=\"2009\"\u003eFAQs\u003c\/h3\u003e\n\u003cp data-start=\"2011\" data-end=\"2275\"\u003e\u003cstrong data-start=\"2011\" data-end=\"2073\"\u003e1) What engines does the Mercury Remote Kit 889246A80 fit?\u003c\/strong\u003e\u003cbr data-start=\"2073\" data-end=\"2076\"\u003eIt is commonly used on Mercury FourStroke manual-start carbureted outboards in the 9.9 HP, 15 HP, and 20 HP range being converted from tiller steering to remote mechanical throttle and shift control.\u003c\/p\u003e\n\u003cp data-start=\"2277\" data-end=\"2421\"\u003e\u003cstrong data-start=\"2277\" data-end=\"2332\"\u003e2) Is this kit intended for electric-start engines?\u003c\/strong\u003e\u003cbr data-start=\"2332\" data-end=\"2335\"\u003eNo. This kit is designed specifically for manual-start (non-electric start) outboards.\u003c\/p\u003e\n\u003cp data-start=\"2423\" data-end=\"2612\"\u003e\u003cstrong data-start=\"2423\" data-end=\"2475\"\u003e3) Does this kit include the remote control box?\u003c\/strong\u003e\u003cbr data-start=\"2475\" data-end=\"2478\"\u003eNo. This kit includes engine-side conversion hardware only. A compatible helm or side-mount mechanical control is required separately.\u003c\/p\u003e\n\u003cp data-start=\"2614\" data-end=\"2748\"\u003e\u003cstrong data-start=\"2614\" data-end=\"2672\"\u003e4) What type of control systems does this kit support?\u003c\/strong\u003e\u003cbr data-start=\"2672\" data-end=\"2675\"\u003eIt supports mechanical (cable-driven) throttle and shift control systems.\u003c\/p\u003e\n\u003cp data-start=\"2750\" data-end=\"3020\"\u003e\u003cstrong data-start=\"2750\" data-end=\"2831\"\u003e5) Why use an OEM Mercury remote kit instead of aftermarket conversion parts?\u003c\/strong\u003e\u003cbr data-start=\"2831\" data-end=\"2834\"\u003eOEM Mercury conversion components are designed to preserve factory control geometry and cable travel, helping support smoother operation, predictable response, and long-term reliability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935584899363,"sku":"889246A80","price":550.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV494035.jpg?v=1698794226"},{"product_id":"mercury-conversion-kit-880095a11","title":"Mercury – Remote Kit | Mechanical Control Conversion Hardware | Part Number 880095A11","description":"\u003c!-- Meta --\u003e\n\u003ch2\u003eMercury—Remote Kit | Mechanical Control Conversion Hardware | Part Number 880095A11\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRemote-control conversion kit for Mercury 15hp FourStroke tiller outboards (mechanical controls).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis remote-control conversion kit converts Mercury 15-horsepower FourStroke tiller outboards to a remote-control setup. It replaces the tiller handle and transitions throttle and shift control to a helm-mounted mechanical control box. The layout is intended to keep engine operation familiar after the conversion, making it a practical factory-style solution for skiffs, small consoles, and utility boats moving from tiller to side-mount control.\u003c\/p\u003e\n\u003cp\u003eKeeping mechanical control linkages and cables in good condition supports smoother throttle and shift response at the helm. Routine inspection, proper cable routing, and correct adjustment can help reduce stiffness and uneven movement over time, supporting reliable operation and helping extend the life of control cables and connection points.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTiller-to-remote conversion hardware for transitioning to helm-mounted mechanical throttle and shift control\u003c\/li\u003e\n\u003cli\u003eDesigned for engines equipped with electric start systems\u003c\/li\u003e\n\u003cli\u003eFactory-style linkage geometry to support consistent throttle and shift movement\u003c\/li\u003e\n\u003cli\u003eHelm-control setup supports cleaner console layouts compared to tiller operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eService Note:\u003c\/strong\u003e Control and cable requirements can vary by engine model and existing rigging. Confirm your engine type, mechanical control configuration, and cable style before ordering. Proper cable routing and adjustment are required to ensure smooth movement and safe operation.\u003c\/p\u003e\n\u003ch3\u003eWhy Use Honda OEM Maintenance Kits\u003c\/h3\u003e\n\u003cp\u003eOEM components are designed around correct cable travel and linkage geometry for compatible outboards. Using OEM hardware helps support predictable throttle and shift response, consistent control feel, and reduced wear on mechanical components, while minimizing the risk of setup issues that can occur with non-matched parts.\u003c\/p\u003e\n\u003ch3\u003eKit Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Title:\u003c\/strong\u003e Mercury – Remote Kit | Mechanical Control Conversion Hardware\u003cbr\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003ePart Number:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e 880095A11\u003cbr\u003e\u003c\/span\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eEngine Models:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Mercury FourStroke; mechanical control system; carbureted engines; electric start engines; fifteen horsepower\u003cbr\u003e\u003c\/span\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eService Interval:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e200 Hour\u003c\/span\u003e\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935642669347,"sku":"880095A11","price":1228.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV696270.jpg?v=1698794467"},{"product_id":"mercury-attaching-kit-r-c-880093a1","title":"Mercury - Remote Control Attaching Kit | 880093A1","description":"\u003ch2\u003eMercury – Remote Control Attaching Kit | 880093A1\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Remote Control Attaching Kit is a clean, OEM solution for converting select tiller-steered Mercury outboards to a remote mechanical control setup. Designed for compact boats and small console layouts, it supports connecting the engine’s throttle and shift to a helm or side-mount control for a more organized driving position.\u003c\/p\u003e\n\u003cp\u003eBuilt specifically for Mercury applications, this attaching kit helps maintain proper mechanical alignment during the conversion process. When installed with correct cable selection and adjustment, it supports smooth control travel, predictable throttle and shift response, and dependable operation without the need for improvised hardware.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTiller to Remote Conversion\u003c\/strong\u003e – Supports converting tiller-steer outboards to remote throttle and shift control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Control Systems\u003c\/strong\u003e – Designed for cable-driven throttle and shift applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Attaching Hardware\u003c\/strong\u003e – Helps maintain proper linkage angles for smooth, predictable operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean Rigging Support\u003c\/strong\u003e – Commonly used during upgrades or repowers on smaller boats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Style Solution\u003c\/strong\u003e – Reduces unnecessary modification during installation\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury FourStroke outboards\u003c\/li\u003e\n\u003cli\u003eCarbureted engines\u003c\/li\u003e\n\u003cli\u003eMechanical throttle and shift systems\u003c\/li\u003e\n\u003cli\u003eCommonly used on\u003cstrong\u003e 40 HP\u003c\/strong\u003e to \u003cstrong\u003e50 HP outboards\u003c\/strong\u003e, \u003cstrong\u003eincluding BigFoot models\u003c\/strong\u003e, being converted from tiller steering to remote control\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngine rigging and linkage configurations can vary by model and serial number\u003c\/li\u003e\n\u003cli\u003eConfirm engine identification and current control system before ordering\u003c\/li\u003e\n\u003cli\u003eInstallation requires correct cable selection, clean routing, and proper throttle and shift adjustment per Mercury service guidance\u003c\/li\u003e\n\u003cli\u003eAfter installation, verify full control travel, smooth shifting, and safe operation before operating under load\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What engines does the Mercury Remote Control Attaching Kit 880093A1 fit?\u003c\/strong\u003e\u003cbr\u003eIt is commonly used on Mercury FourStroke 40 HP and 50 HP carbureted outboards, including BigFoot models, being converted from tiller steering to remote mechanical throttle and shift control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) What type of control systems is this kit designed for?\u003c\/strong\u003e\u003cbr\u003eThis kit is designed for mechanical (cable-driven) throttle and shift systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Does this kit include the control box?\u003c\/strong\u003e\u003cbr\u003eNo. This kit provides the engine-side attaching hardware only. A compatible helm or side-mount remote control is required separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this kit used during repowers or console conversions?\u003c\/strong\u003e\u003cbr\u003eYes. It is commonly used during upgrades, repowers, or conversions where a cleaner remote control layout is desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why use an OEM Mercury attaching kit instead of aftermarket hardware?\u003c\/strong\u003e\u003cbr\u003eOEM Mercury rigging hardware is designed around factory control geometry, helping support accurate control travel, smoother operation, and reduced risk of fitment or setup issues.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935643390243,"sku":"880093A1","price":76.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV481097.jpg?v=1698794469"},{"product_id":"mercury-harness-asy-adptr-8m0153356","title":"Mercury – Ignition Adapter Non-Digital Throttle \u0026 Shift 10-Pin to 14-Pin with SmartCraft Data | 84-8M0153356","description":"\u003ch2\u003eMercury – Ignition Adapter Non-Digital Throttle \u0026amp; Shift 10-Pin to 14-Pin with SmartCraft Data | 84-8M0153356\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Ignition Adapter (Non-Digital Throttle \u0026amp; Shift) is designed for mechanical control setups where a ten-pin engine harness must connect to a fourteen-pin boat-side harness while retaining SmartCraft data functionality. It is most commonly used during upgrades where the engine supports SmartCraft but the boat has already been rigged with the newer fourteen-pin harness layout. This adapter allows ignition and data signals to remain intact without reworking the entire wiring system.\u003c\/p\u003e\n\u003cp\u003eUsing the correct ignition and data adapter helps maintain reliable starting behavior and consistent SmartCraft gauge communication. Proper routing, secure connections, and routine inspection help reduce signal interruptions and support dependable system performance over time in typical marine environments.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Pin to 14-Pin Adapter\u003c\/strong\u003e – Connects older engine harnesses to newer boat-side wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartCraft Data Support\u003c\/strong\u003e – Maintains engine data and gauge communication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-DTS Mechanical Design\u003c\/strong\u003e – Intended for control systems without digital throttle and shift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Adapter Assembly\u003c\/strong\u003e – Supports a clean, factory-style installation\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical remote control systems\u003c\/li\u003e\n\u003cli\u003eECM-equipped engines\u003c\/li\u003e\n\u003cli\u003eSmartCraft-enabled Mercury outboard platforms\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm engine harness pin count and boat-side connector configuration before ordering\u003c\/li\u003e\n\u003cli\u003eEnsure all connectors are fully seated and secured during installation\u003c\/li\u003e\n\u003cli\u003eRoute wiring to avoid strain, sharp bends, or chafe points\u003c\/li\u003e\n\u003cli\u003eVerify proper ignition function and SmartCraft data display after installation\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What is this ignition adapter used for?\u003c\/strong\u003e\u003cbr\u003eIt allows a ten-pin engine harness to connect to a fourteen-pin boat-side harness while preserving SmartCraft data communication.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When is this adapter typically required?\u003c\/strong\u003e\u003cbr\u003eIt is commonly used during upgrades when a SmartCraft-capable engine is installed on a boat already rigged with a fourteen-pin harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Does this adapter support SmartCraft gauges?\u003c\/strong\u003e\u003cbr\u003eYes. It maintains SmartCraft data communication for compatible gauges and displays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this adapter compatible with DTS systems?\u003c\/strong\u003e\u003cbr\u003eNo. This adapter is intended for non-digital throttle and shift (mechanical) control systems only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury ignition and data adapter?\u003c\/strong\u003e\u003cbr\u003eOEM adapters are built to Mercury electrical and communication specifications, helping ensure reliable starting, stable SmartCraft data flow, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935992729891,"sku":"84-8M0153356","price":118.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV744384.jpg?v=1720534617"},{"product_id":"mercury-dual-key-switch-with-harness-engine-to-helm-non-dts-14-pin-25-ft-fits-2006-and-newer-non-dts-outboards-from-25-to-250-hp-14-pin-connectors-all-mcm-mie-engines-w-14-pin-connectors-aeu-84-896537k25","title":"Mercury – Dual Engine Key Switch Harness Kit Non DTS Fourteen Pin | Ignition Wiring Kit | 896537K25","description":"\u003ch2\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eMercury – Dual Engine Key Switch Harness Kit Non DTS Fourteen Pin | Ignition Wiring Kit | 896537K25\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan data-preserver-spaces=\"true\"\u003eOverview\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003eThis \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003edual engine\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e key switch\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e harness kit \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eis built\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e for mechanical Mercury outboards that \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eneed\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e synchronized ignition control from a single helm.\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eIt’s commonly used\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e on \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003etwin engine\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e boats with wide consoles where clean routing and matching components matter.\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eThe paired twenty five foot harnesses provide plenty of reach without stretching or forcing connections. It’s a straightforward solution that keeps dual engine ignition layouts neat and predictable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan data-preserver-spaces=\"true\"\u003eKey Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e• \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eDual Twenty Five Foot Harnesses\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e – Provides matched length wiring for twin engine installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e • \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFourteen Pin \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eNon DTS\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Connectors\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e – Supports mechanical ignition systems without digital throttle shift.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e • \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eMatched Waterproof Key Switches\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e – Designed for dual engine ignition control at the helm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e • \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFactory Mercury Wiring Layout\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e – Maintains consistent pin alignment and reliable signal flow across both engines.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan data-preserver-spaces=\"true\"\u003eEngine \u0026amp; Boat Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e• Mercury outboards\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e • Mechanical control sys\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003etem\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e • \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eNon DTS\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e ignition systems\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e • \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFourteen pin\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e connector engines\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan data-preserver-spaces=\"true\"\u003ePerformance \u0026amp; Practical Benefits\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003eWith matched harness lengths, both engines respond evenly and predictably when starting. \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eWiring routes cleanly\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e, \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003ewhich helps\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e prevent electrical strain and long-term issues.\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Ignition response feels smooth and consistent across both engines. The overall setup feels balanced and dependable once insta\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003elled.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan data-preserver-spaces=\"true\"\u003eWhy Buy OEM\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003eOEM dual engine harness kits ensure both sides share the same resistance and signal timing. That consistency helps avoid uneven starting behavior and electrical troubleshooting later on. It’s the reliable choice for \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003etwin engine\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e rigs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFAQs\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eHow do I know I need the \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003edual engine\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e kit?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e If your boat runs twin engines and needs matched ignition wiring, this kit is the \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eright\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003esetup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eDoes this kit require calibration?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e No calibration \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eis required\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e after installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eIs it suitable for saltwater use?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Yes, with routine rinsing and normal electrical maintenance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eIs installation difficult?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Installation is straightforward for a marine technician familiar with \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003etwin engine\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e rigs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eWhat happens if one harness starts\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e to fail?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e You may notice uneven starting or delayed response from one engine.\u003c\/span\u003e\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46936026743075,"sku":"84-896537K25","price":546.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/896537k_6.jpg?v=1698795829"},{"product_id":"mercury-key-switch-with-harness-engine-to-helm-non-dts-14-pin-20-ft-fits-2006-and-newer-non-dts-outboards-from-25-to-250-hp-14-pin-connectors-all-mcm-mie-engines-w-14-pin-connectors-84-896537k20","title":"Mercury – Key Switch Harness Kit Non-DTS 14-Pin | Ignition Wiring Kit | 896537K20","description":"\u003ch2\u003eMercury – Key Switch Harness Kit Non-DTS 14-Pin | Ignition Wiring Kit | 896537K20\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Key Switch Harness Kit (Non-DTS 14-Pin) is designed for mechanical outboard installations that require maximum reach at the helm without transitioning to digital throttle and shift systems. It is commonly used on larger boats, deeper console layouts, or full refits where shorter harnesses cannot be routed cleanly. The extended harness length helps keep wiring relaxed, properly positioned, and free from unnecessary strain behind the dash.\u003c\/p\u003e\n\u003cp\u003eUsing a properly sized ignition harness supports consistent engine starting and helps reduce electrical issues caused by stretched, stressed, or tightly routed wiring. Clean routing, secure mounting, and routine inspection help maintain stable signal flow and support long-term reliability in typical marine operating conditions.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended 20-Foot Ignition Harness\u003c\/strong\u003e – Supports long wiring runs and wide or deep console layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-DTS 14-Pin Connector\u003c\/strong\u003e – Designed for mechanical ignition systems using fourteen-pin connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Key Switch Included\u003c\/strong\u003e – Helps protect against moisture and spray at the helm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Mercury Wiring Layout\u003c\/strong\u003e – Maintains proper pin alignment and clean signal flow\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical control systems\u003c\/li\u003e\n\u003cli\u003eNon-DTS ignition systems\u003c\/li\u003e\n\u003cli\u003eFourteen-pin connector engine applications\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm engine ignition type and non-DTS fourteen-pin compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eEnsure all wiring is securely routed and connections are fully seated during installation\u003c\/li\u003e\n\u003cli\u003eVerify proper engine starting and shutdown operation after installation\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What is this key switch harness kit used for?\u003c\/strong\u003e\u003cbr\u003eIt provides a long-reach ignition wiring solution for Mercury outboards using non-DTS fourteen-pin mechanical ignition systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) How is this kit different from shorter non-DTS harness kits?\u003c\/strong\u003e\u003cbr\u003eThis version includes a 20-foot harness designed for large boats, deep consoles, and installations requiring maximum reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Does this kit include the ignition key switch?\u003c\/strong\u003e\u003cbr\u003eYes. The kit includes a waterproof ignition key switch with the extended harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is this compatible with DTS or SmartCraft systems?\u003c\/strong\u003e\u003cbr\u003eNo. This kit is intended for non-DTS mechanical ignition systems only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury extended harness kit?\u003c\/strong\u003e\u003cbr\u003eOEM ignition components are built to Mercury electrical specifications, helping ensure reliable starting, stable signal timing, and long-term durability.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46936027037987,"sku":"84-896537K20","price":296.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/896537k_4.jpg?v=1698795829"},{"product_id":"mercury-harness-kit-20-ft-84-17829a20","title":"Mercury – Remote Control Ignition Choke Extension Harness | Wiring Extension | 84-17829A20","description":"\u003ch2\u003eMercury – Remote Control Ignition Choke Extension Harness | Wiring Extension | 84-17829A20\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Mercury Remote Control Ignition Choke Extension Harness is designed to provide additional wiring length between the helm control station and the engine. It is commonly used on larger hulls or dual-station setups where standard harness lengths do not comfortably reach. Using a purpose-built extension harness helps maintain clean rigging and avoids stretching wiring or adding splices that can create stress points.\u003c\/p\u003e\n\u003cp\u003eMaintaining properly routed wiring supports more consistent starting and choke operation while reducing strain on connectors and terminals. Routine inspection, secure fastening, and avoiding sharp bends or pinch points can help protect the harness from chafe and vibration, supporting dependable electrical contact over time in typical marine environments.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition \u0026amp; Choke Wiring Extension\u003c\/strong\u003e – Provides added reach for longer helm-to-engine control runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-Lead Harness Layout\u003c\/strong\u003e – Intended for standard ignition and choke wiring in mechanical systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e – Designed to handle vibration, moisture, and typical engine-compartment heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Connectors\u003c\/strong\u003e – Supports secure electrical connections without wire modification\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngine \u0026amp; System Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards\u003c\/li\u003e\n\u003cli\u003eMechanical remote control systems\u003c\/li\u003e\n\u003cli\u003eNon-ECM ignition systems\u003c\/li\u003e\n\u003cli\u003eLegacy two-stroke and early four-stroke Mercury platforms\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm engine configuration, ignition type, and connector style before ordering\u003c\/li\u003e\n\u003cli\u003eRoute the harness away from chafe points and secure it properly\u003c\/li\u003e\n\u003cli\u003eAllow appropriate slack for normal movement and vibration\u003c\/li\u003e\n\u003cli\u003eVerify ignition and choke operation after installation\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1) What is this ignition\/choke extension harness used for?\u003c\/strong\u003e\u003cbr\u003eIt extends ignition and choke wiring between the control station and the engine when additional length is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2) When is this harness commonly needed?\u003c\/strong\u003e\u003cbr\u003eIt is often used on larger boats or dual-station setups where standard wiring lengths are insufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3) Does this harness replace original ignition wiring?\u003c\/strong\u003e\u003cbr\u003eNo. It is designed to extend existing ignition and choke wiring using OEM-style connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4) Is cutting or splicing required for installation?\u003c\/strong\u003e\u003cbr\u003eNo. The harness connects directly using factory-style connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5) Why choose an OEM Mercury extension harness?\u003c\/strong\u003e\u003cbr\u003eOEM harnesses are built to Mercury wiring standards and connector specifications, helping reduce poor pin contact, corrosion-related issues, and intermittent electrical behavior.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46936081269027,"sku":"84-17829A20","price":122.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV465767.jpg?v=1698796091"}],"url":"https:\/\/partsvu.com\/en-ca\/collections\/mechanical-control-boxes.oembed","provider":"PartsVu","version":"1.0","type":"link"}