{"title":"Trolling Motor Accessories","description":"","products":[{"product_id":"minn-kota-mka-21-composite-quick-release-bracket-1854021","title":"Minn Kota | Quick Release Bracket | Composite Mount System | MKA-21 | 1854021","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Quick Release Bracket | Composite Mount System | MKA-21 | 1854021\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Quick Release Bracket | Composite Mount System | MKA-21 | 1854021\u003c\/strong\u003e is a top-selling, highly advanced marine mounting solution engineered to provide ultra-fast quick-release functionality for modern electric-steer freshwater trolling motors. Built around an incredibly durable two-piece interlocking sliding design, this high-yield composite bracket allows boaters to attach or completely remove their bow-mount trolling motor in seconds, completely tool-free. For anglers who park their boats at public docks, truck stops, or outdoor storage slips, the ability to slide an expensive motor off the deck and lock it inside a secure compartment or cabin is a critical defense against opportunistic theft. Conversely, when the motor is removed, the remaining deck-mounted plate leaves a clean, low-profile footprint that opens up your casting platform, eliminating tripping hazards and optimizing space for family cruising or line management.\u003c\/p\u003e\n\n\u003cp\u003eMolded entirely from a premium, high-yield composite polymer material, the MKA-21 is explicitly engineered to withstand the brutal realities of marine use. Unlike traditional metal brackets that can chip, scratch, or experience severe galvanic corrosion when exposed to damp environments, this industrial composite structure is completely immune to rust, pitting, and sun fading. The bracket features an interlocking slide channel tracking matrix that is held tightly together by a heavy-duty, spring-pinned composite locking handle with integrated stainless steel pins. This design provides an incredibly tight mechanical fit that dampens motor vibration and torque noise, maintaining absolute silent stealth while hunting fish. The kit comes fully equipped for immediate installation, containing the upper motor plate, the lower deck-mounted puck, the quick-release handle assembly, a transport hold-down strap, and a complete assortment of marine-grade stainless steel bolts, locking nuts, and backing washers.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool-Free Sliding Quick Release:\u003c\/strong\u003e Interlocking horizontal track system allows boat owners to slide their trolling motor off the deck in seconds by simply manipulating a heavy-duty locking handle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRustproof High-Yield Composite Build:\u003c\/strong\u003e Crafted from high-strength composite polymer material that is completely immune to salt rust, pitting, weathering, and UV-induced degradation or cracking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-Profile Clear-Deck Footprint:\u003c\/strong\u003e When the motor is removed, the remaining deck-mounted puck features a smooth, low-profile design that leaves your casting platform completely free of tripping hazards.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePadlock-Compatible Theft Prevention:\u003c\/strong\u003e The structural locking handle assembly features a pre-drilled safety hole that accommodates a standard marine padlock, locking the motor securely to the vessel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-Vibration Tight Tolerances:\u003c\/strong\u003e Engineered with precision tolerances along the slide tracks to dampen motor vibration and torque noise, ensuring silent stealth when tracking fish on shallow flats.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Marine Fastener Set:\u003c\/strong\u003e Ships fully loaded with premium marine-grade stainless steel bolts, nylon-locking nuts, and oversized backing washers required for a professional through-hull deck installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-21 Composite Mount System features an expanded compatibility layout designed specifically to match electric-steer, electronic-deploy freshwater trolling motors. The pre-drilled hole configurations on the outer plate line up perfectly with the factory base brackets of the **Minn Kota Terrova**, **Minn Kota Ulterra**, **Minn Kota PowerDrive**, and **PowerDrive V2** series motors. It also fits legacy AutoPilot models.\u003c\/p\u003e\n\n\u003cp\u003eIn terms of structural capacity, the MKA-21 is explicitly rated and safety-tested for standard power outputs. It is approved for motors with **80 pounds of thrust or less, and shaft lengths of 60 inches or shorter**. It is **not compatible** with large 36-volt, 112lb thrust motors or any motor with an extended 72-inch shaft length. Those larger systems generate extreme leverage and high-torque forces that can override this bracket's footprint, requiring you to step up to the larger heavy-duty aluminum MKA-32 or MKA-51 brackets. It requires a flat bow deck surface for proper through-hull flush installation.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this black composite MKA-21 bracket and the white saltwater RTA-17 bracket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe primary differences between these two brackets are exterior color aesthetics and their targeted marine environment designations. Mechanically, the MKA-21 and the RTA-17 share the exact same dimensions, interlocking slide tracks, and pre-drilled bolt hole configurations, making them completely interchangeable. The MKA-21 features a sleek black finish tailored for freshwater bass and aluminum fishing boats to match black trolling motor bases, whereas the RTA-17 features a clean white finish designed to complement white marine gelcoats, center consoles, and the Riptide saltwater motor series. Both utilize premium corrosion-proof composite matrices.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need to have under-deck access to install the MKA-21 base puck to my boat bow safely?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, having physical access to the underside of your bow deck is highly ideal and recommended. To safely handle the high-torque acceleration and sudden rotational forces generated by an 80lb thrust motor, the lower base puck must be secured through the hull using the provided stainless steel bolts, large backing washers, and nylon-locking nuts to prevent the hardware from pulling through the fiberglass deck. If your bow deck is completely sealed with foam or has no access ports, you will need to install a marine inspection hatch to reach underneath, or utilize specialized heavy-duty marine blind toggle fasteners rated specifically to anchor equipment from the top down.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I buy an additional inner deck puck separately to use one motor on two different boats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. The inner composite deck plate (puck) can be purchased independently as an accessory part (Minn Kota part number 2371965). This modular design is an excellent advantage for multi-boat owners. By installing an independent inner puck on the bow of your primary bass boat and a second puck on your family pontoon or aluminum skiff, you can easily shift your single Terrova or PowerDrive trolling motor between both vessels in seconds, allowing you to maximize your electronics investment across your entire fleet without purchasing a second expensive motor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat size padlock do I need to secure the locking handle against theft?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo secure the MKA-21 locking handle, you should look for a high-quality marine-grade padlock featuring a short-shank design with a maximum shackle diameter of 1\/4 inch. A stainless steel or brass padlock is highly recommended to prevent the locking mechanism from freezing up due to salt air or heavy rain exposure. Avoid using long-shackle padlocks, as the excess loop space can allow the lock to bounce around and slap against your boat's fiberglass deck while running at high speeds, which can cause noisy distractions and chip your gelcoat finish.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the included fabric hold-down strap in this quick-release kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe high-strength fabric strap included with the MKA-21 kit serves as a critical safety accessory designed to protect your motor during transport. When you stow your trolling motor and trailer your boat down the highway at high speeds, or drive across rough, choppy lake swells on plane, the motor head can experience intense upward bouncing forces. Wrapping this tough strap tightly around the stowed motor arm and securing it to the bracket base completely immobilizes the assembly. This neutralizes road shocks, stops the bracket from rattling, and prevents excessive wear on the internal steering gears and locking pins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":45626109722915,"sku":"PV001402","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV1402_2.jpg?v=1698782601"},{"product_id":"minn-kota-rta-19-riptide-saltwater-composite-quick-release-bracket-1854019","title":"Minn Kota | Composite Quick Release Bracket | Riptide Saltwater | RTA-19 | 1854019","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Composite Quick Release Bracket | Riptide Saltwater | RTA-19 | 1854019\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Composite Quick Release Bracket | Riptide Saltwater | RTA-19 | 1854019\u003c\/strong\u003e is an elite, heavy-duty marine accessory engineered to allow coastal and offshore anglers to quickly remove or reattach their bow-mount trolling motors in seconds. Saltwater boaters face unique operating conditions; they frequently need to clear the bow deck to prevent fly-line snags, remove expensive electronics when parking at public slips to prevent theft, or protect their gear from harsh weather when storing the boat outdoors. The RTA-19 provides a rock-solid solution, using a low-profile two-piece interlocking plate design. The small inner plate (or puck) bolts permanently to your fiberglass deck, while the larger outer plate secures to the base of your trolling motor. To remove the motor, you simply pull back the heavy-duty locking handle, slide the top plate off the puck, and lift the motor away, leaving your bow clean, flat, and safe to step on.\u003c\/p\u003e\n\n\u003cp\u003eMolded entirely from high-yield, premium white composite materials, the RTA-19 is built to withstand intense sun, salt, and wave force. Unlike traditional aluminum brackets that can chip, scratch, or experience severe galvanic corrosion when exposed to saltwater, this industrial composite structure is completely immune to rust, pitting, and discoloration. The clean white finish matches modern offshore center consoles and bay boat gelcoats perfectly for a clean, factory-installed look. The heavy-duty locking handle features dual integrated stainless steel pins that hold the plates together tightly to eliminate motor wobble. For added security, the handle pin features a dedicated clearance hole that accommodates a short-shank padlock, allowing you to lock the trolling motor securely to your deck to deter opportunistic thieves at the marina boat ramp.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstant Tool-Free Motor Removal:\u003c\/strong\u003e Interlocking slide plate tracking allows you to slide your trolling motor off the bow deck in seconds by simply pulling a mechanical locking handle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRustproof White Marine Composite Build:\u003c\/strong\u003e Constructed from a high-yield composite matrix that is completely impervious to saltwater corrosion, pitting, rust, and UV-induced yellowing or chalking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-Profile Visual Integration:\u003c\/strong\u003e When the motor is removed, the remaining deck-mounted puck features a smooth, low-profile design that leaves your casting platform clear of tripping hazards.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePadlock Security Locking Handle:\u003c\/strong\u003e The locking arm is outfitted with dual stainless steel pins and features an integrated padlock hole, allowing you to lock the motor to your deck for maximum security.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-Rattle Tight Fitment:\u003c\/strong\u003e Engineered with tight tolerances across the interlocking channels to absorb motor torque and prevent rattling, ensuring silent stealth while hunting fish on shallow flats.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Marine Hardware Kit:\u003c\/strong\u003e Comes fully loaded with premium marine-grade stainless steel bolts, nuts, washers, and insulated spacers required for a professional through-hull deck installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota RTA-19 Composite Quick Release Bracket features a specialized compatibility matrix configured uniquely for manual-deploy and cable-steer bow-mount form factors. It is fully compatible with the **Minn Kota Riptide Fortrex**, **Minn Kota Riptide Maxxum**, and **Minn Kota Riptide Edge** saltwater trolling motor series. The bolt hole patterns on the upper plate are pre-drilled to align with the cast-aluminum bases of these specific motor series.\u003c\/p\u003e\n\n\u003cp\u003ePlease note that this bracket is explicitly rated and safety-tested for mid-range power outputs. It is designed for motors with **80 pounds of thrust or less, and shaft lengths of 60 inches or shorter**. It is **not for use** with high-output 36-volt, 112lb thrust motors or any trolling motor with an extended shaft length of 72 inches or longer. Those larger systems generate extreme leverage and high-torque forces that override this bracket's footprint, requiring you to step up to the larger heavy-duty aluminum RTA-54 or RTA-55 brackets. It requires a flat bow deck section for proper flush installation.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this RTA-19 bracket and the RTA-17 model?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe key difference between the two brackets lies in their structural shape and pre-drilled bolt hole patterns, which cater to entirely different trolling motor steering styles. The RTA-19 is custom-engineered to fit manual-deploy and cable-steer saltwater motors, specifically the Riptide Fortrex, Maxxum, and Edge series. Conversely, the RTA-17 features a narrower, extended plate design tailored to fit electric-steer, electronic-deploy saltwater motors like the Riptide Terrova, Ulterra, and PowerDrive. Always match the bracket model to your specific motor series to ensure the pre-drilled base holes align correctly during installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need to have under-deck access to install the RTA-19 puck to my boat bow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, having direct access to the underside of your bow deck is highly ideal and recommended. Securely mounting the RTA-19 inner puck requires drilling through your fiberglass deck and fastening it from underneath using the provided stainless steel bolts, large washers, and nylon-locking nuts to ensure the plate can handle high motor torque. If your bow is completely sealed and you have no physical way to reach underneath, you will need to utilize specialized aftermarket marine blind fasteners, such as toggle bolts or rubber well nuts, to anchor the puck securely from the top down.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat size padlock do I need to secure the locking handle against theft?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo secure the RTA-19 locking handle, you should look for a high-quality marine-grade padlock featuring a short-shank design with a maximum shackle diameter of 1\/4 inch. A stainless steel or brass padlock is highly recommended to prevent the locking mechanism from freezing up due to salt air exposure. Avoid using long-shackle padlocks, as the excess loop space can allow the lock to bounce around and slap against your boat's fiberglass deck while running at high speeds, which can cause noisy distractions and chip your gelcoat finish.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I buy an additional inner deck puck separately to use one motor on two different boats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. The inner composite deck plate (puck) can be purchased independently as an accessory part (Minn Kota part number 2371965). This modular design is an excellent advantage for multi-boat owners. By installing an independent inner puck on the bow of your primary flats boat and a second puck on your family pontoon or aluminum skiff, you can easily shift your single Riptide trolling motor between both vessels in seconds without having to buy a second expensive motor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this composite bracket strong enough to handle rough offshore ocean swells without cracking?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the RTA-19 is engineered from an industrial-grade, high-yield composite polymer matrix that provides exceptional structural strength and flexural endurance. It is designed to withstand heavy wave impacts, sudden acceleration torque, and the continuous vibrations encountered during offshore coastal use. As long as you stay within the maximum structural limits of 80 lbs of thrust and a 60-inch shaft length, the composite material will absorb stress smoothly without fatiguing, cracking, or loosening over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":45626130596131,"sku":"PV002157","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV2157_2.jpg?v=1698782588"},{"product_id":"minn-kota-rta-17-composite-quick-release-bracket-1854017","title":"Minn Kota | Composite Quick Release Bracket | RTA-17 | 1854017","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Composite Quick Release Bracket | RTA-17 | 1854017\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Composite Quick Release Bracket | RTA-17 | 1854017\u003c\/strong\u003e is the ultimate deck management upgrade designed specifically for coastal and flats anglers operating electric-steer, bow-mount saltwater trolling motors. Marine environments demand versatile equipment layouts; boaters frequently need to remove their trolling motor to install a custom winter storage cover, protect their expensive gear from dockside theft, or clear the bow deck entirely for family cruising days. The RTA-17 delivers this capability cleanly through an interlocking slide-plate tracking system. The compact inner puck plate mounts permanently to your bow deck, while the outer plate fastens to your trolling motor base housing. To detach the motor, simply slide out the stainless steel pinned \"U-shaped\" locking handle, slide the motor back along the track, and lift it away, leaving your casting deck flat, clean, and completely safe to walk on.\u003c\/p\u003e\n\n\u003cp\u003eMolded from high-yield, premium white composite polymer material, the RTA-17 is engineered to withstand intense UV exposure, extreme heat, and heavy saltwater spray. While traditional aluminum mounting plates are prone to scratching, paint chipping, and rapid galvanic corrosion in saltwater environments, this composite structure is completely immune to rust, pitting, and discoloration. Its clean white aesthetic integrates perfectly with modern fiberglass gelcoats and offshore deck lines. The heavy-duty locking handle holds the plates together tightly under full power loads to eliminate motor vibration. The outer locking pin features an integrated clearance hole that accommodates a standard short-shank padlock, allowing you to lock your motor to your deck for reliable security when trailing or docked at public boat slips.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEffortless Sliding Quick-Release:\u003c\/strong\u003e Interlocking horizontal track system allows you to slide your trolling motor off the deck in seconds without the need for tools.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSaltwater-Proof Composite Matrix:\u003c\/strong\u003e Crafted from high-yield white composite material that is completely impervious to salt rust, pitting, weathering, and UV-induced discoloration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClean Low-Profile Deck Puck:\u003c\/strong\u003e Leaves a minimal, smooth footprint on your bow deck when the motor is removed, eliminating tripping hazards and keeping your casting platform wide open.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePadlock-Compatible \"U\" Handle:\u003c\/strong\u003e Features a robust locking handle armed with dual stainless steel pins and an integrated security hole to lock your motor down against opportunistic theft.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-Vibration Engineering:\u003c\/strong\u003e Designed with precision tolerances along the slide tracks to dampen motor vibration and torque noise, ensuring silent stealth when hunting fish on shallow flats.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Marine Fastener Set:\u003c\/strong\u003e Ships fully equipped with premium marine-grade stainless steel nuts, bolts, washers, and backing spacers required for a secure through-hull deck installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota RTA-17 Composite Quick Release Bracket features a specialized structural footprint designed specifically to match electric-steer, electronic-deploy saltwater bow mounts. It is fully compatible with the **Minn Kota Riptide Ulterra**, **Minn Kota Riptide Terrova**, **Minn Kota Riptide PowerDrive**, and legacy **Riptide ST\/SP** series trolling motors. The bolt hole configurations on the outer plate line up perfectly with the elongated composite base brackets of these specific series.\u003c\/p\u003e\n\n\u003cp\u003ePlease note that this bracket is explicitly rated for standard multi-battery power systems. It is approved for motors with **80 pounds of thrust or less, and shaft lengths of 60 inches or shorter**. It is **not compatible** with large 36-volt, 112lb thrust motors or any motor with an extended 72-inch shaft length. Those larger systems generate extreme leverage and high-torque forces that can override this bracket's structural design, requiring you to utilize the larger aluminum RTA-54 or RTA-62 brackets instead. It requires a flat bow deck surface for safe flush installation.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this white RTA-17 bracket on a freshwater Minn Kota Terrova or Ulterra motor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. The RTA-17 features the exact same dimensions and pre-drilled bolt hole configurations as the black freshwater **MKA-21** bracket. The only real differences between the two brackets are the exterior color and the saltwater certification of the composite material. If you prefer a clean white aesthetic on your freshwater bass boat or multi-species rig to match a white gelcoat or wrap, you can safely install the RTA-17 under a standard black freshwater Terrova or Ulterra motor without experiencing any fitment issues.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the best way to clean and maintain the slide tracks to prevent the plates from jamming?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the RTA-17 operates along an interlocking sliding track, keeping the channels free of abrasive debris is the best way to ensure smooth operation. Periodically rinse the bracket with fresh water to clear away any accumulated lake sand, dried salt crystals, mud, or weeds that can get trapped inside the slides. To keep the plates sliding smoothly, apply a thin layer of marine-grade silicone spray or dry Teflon lubricant along the interlocking tracks each season. Avoid using heavy greases, as they can trap dirt and sand, creating an abrasive paste that wears down the composite channels.\u003c\/p\u003e\n\n\u003cstrong\u003eIs it necessary to use an under-deck backing plate when bolting down the inner puck?\u003c\/strong\u003e\n\u003cp\u003eWhile the RTA-17 package includes heavy-duty marine stainless steel bolts, washers, and locking nuts that provide excellent holding strength for standard decks, using an additional marine starboard or aluminum backing plate underneath your fiberglass deck is highly recommended for optimal stability. Electric-steer trolling motors exert substantial torque forces on the bow deck during sudden turns or high-speed acceleration. A backing plate helps distribute this pressure over a wider surface area, preventing fiberglass stress cracks and ensuring your quick-release base remains rock-solid for years.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow can I prevent the stainless steel locking handle from vibrating or rattling while the boat is running?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RTA-17 is engineered with tight tolerances to prevent rattling, but if you notice any slight movement or vibration in the locking handle while running across heavy lake chop, you can easily secure it by using a small rubber dampener or running a flexible marine-grade cable lock through the padlock hole instead of a traditional metal padlock. The flexible rubber casing of a cable lock acts as a natural shock absorber, tightening the handle assembly down and eliminating any metal-on-metal noise that could disrupt your quiet tracking lines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I purchase just the inner deck puck if I want to move my trolling motor between two boats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the inner composite white deck plate can be purchased separately as an individual accessory part (Minn Kota part number 2371965). This modular design is an excellent convenience for anglers who own multiple vessels. By installing one inner puck on your primary saltwater bay boat and a second puck on your small aluminum skiff or pontoon, you can shift your single Riptide trolling motor between both boats in seconds, allowing you to maximize your electronics investment across your entire fleet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":45626143244579,"sku":"PV001960","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV1960_2.jpg?v=1698782590"},{"product_id":"t-h-marine-g-force-eliminator-trolling-motor-clear-silver-prop-nut-f-minn-kota-80-101-112-trolling-motor-gfel-mk-c-dp","title":"T-H Marine G-Force ELIMINATOR Trolling Motor Clear\/Silver Prop Nut f\/Minn Kota 80-101-112 Trolling Motor - GFEL-MK-C-DP","description":"\u003cp\u003e\u003cstrong\u003eG-Force ELIMINATOR Trolling Motor Clear\/Silver Prop Nut for Minn Kota 80-101-112 Trolling Motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.\u003c\/p\u003e\u003cp\u003eDesigned to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.\u003c\/p\u003e\u003cp\u003eMade to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.\u003c\/p\u003e\u003cp\u003eMake sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey ELIMINATOR Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined from 6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eO-ring dampens noise\/vibration and secures nut\u003c\/li\u003e\n\u003cli\u003eWider contact area for a more stable prop\u003c\/li\u003e\n\u003cli\u003eCooling ports aid in heat dissipation\u003c\/li\u003e\n\u003cli\u003eAnodized protected\u003c\/li\u003e\n\u003cli\u003eNo tools needed\u003c\/li\u003e\n\u003cli\u003eAvailable in popular colors\u003c\/li\u003e\n\u003cli\u003eVisually appealing\u003c\/li\u003e\n\u003cli\u003eDesigned and made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"T-H MARINE","offers":[{"title":"Default Title","offer_id":45626431734051,"sku":"PV765394","price":107.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV765394.jpg?v=1698780780"},{"product_id":"t-h-marine-g-force-eliminator-trolling-motor-red-prop-nut-f-minn-kota-80-101-112-trolling-motor-gfel-mk-r-dp","title":"T-H Marine G-Force ELIMINATOR Trolling Motor Red Prop Nut f\/Minn Kota 80-101-112 Trolling Motor - GFEL-MK-R-DP","description":"\u003cp\u003e\u003cstrong\u003eG-Force ELIMINATOR Trolling Motor Red Prop Nut for Minn Kota 80-101-112 Trolling Motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.\u003c\/p\u003e\u003cp\u003eDesigned to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.\u003c\/p\u003e\u003cp\u003eMade to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.\u003c\/p\u003e\u003cp\u003eMake sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey ELIMINATOR Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined from 6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eO-ring dampens noise\/vibration and secures nut\u003c\/li\u003e\n\u003cli\u003eWider contact area for a more stable prop\u003c\/li\u003e\n\u003cli\u003eCooling ports aid in heat dissipation\u003c\/li\u003e\n\u003cli\u003eAnodized protected\u003c\/li\u003e\n\u003cli\u003eNo tools needed\u003c\/li\u003e\n\u003cli\u003eAvailable in popular colors\u003c\/li\u003e\n\u003cli\u003eVisually appealing\u003c\/li\u003e\n\u003cli\u003eDesigned and made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"T-H MARINE","offers":[{"title":"Default Title","offer_id":45626431766819,"sku":"PV765395","price":107.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV765395_1.jpg?v=1698780779"},{"product_id":"t-h-marine-g-force-eliminator-trolling-motor-clear-silver-prop-nut-f-minn-kota-35-70-trolling-motor-gfel-mks-c-dp","title":"T-H Marine G-Force ELIMINATOR Trolling Motor Clear\/Silver Prop Nut f\/Minn Kota 35-70 Trolling Motor - GFEL-MKS-C-DP","description":"\u003cp\u003e\u003cstrong\u003eG-Force ELIMINATOR Trolling Motor Clear\/Silver Prop Nut for Minn Kota 35-70 Trolling Motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.\u003c\/p\u003e\u003cp\u003eDesigned to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.\u003c\/p\u003e\u003cp\u003eMade to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.\u003c\/p\u003e\u003cp\u003eMake sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey ELIMINATOR Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined from 6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eO-ring dampens noise\/vibration and secures nut\u003c\/li\u003e\n\u003cli\u003eWider contact area for a more stable prop\u003c\/li\u003e\n\u003cli\u003eCooling ports aid in heat dissipation\u003c\/li\u003e\n\u003cli\u003eAnodized protected\u003c\/li\u003e\n\u003cli\u003eNo tools needed\u003c\/li\u003e\n\u003cli\u003eAvailable in popular colors\u003c\/li\u003e\n\u003cli\u003eVisually appealing\u003c\/li\u003e\n\u003cli\u003eDesigned and made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"T-H MARINE","offers":[{"title":"Default Title","offer_id":45626431963427,"sku":"PV775894","price":82.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV775894_1.jpg?v=1698780677"},{"product_id":"t-h-marine-g-force-silencer-trolling-motor-vibration-pad-black-gfes-blk-dp","title":"T-H Marine G-Force SILENCER Trolling Motor Vibration Pad - Black - GFES-BLK-DP","description":"\u003cp\u003e\u003cstrong\u003eG-Force SILENCER Trolling Motor Vibration Pad - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe G-Force SILENCER is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER also quiets the harsh \"œclanking\" noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExtends life of trolling motor\u003c\/li\u003e\n\u003cli\u003eReduces noise and vibration\u003c\/li\u003e\n\u003cli\u003eEliminates metal-to-metal contact\u003c\/li\u003e\n\u003cli\u003ePrevents harsh clanking when stowing trolling motor\u003c\/li\u003e\n\u003cli\u003ePackage will contain product for Motorguide and Minn Kota\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"T-H MARINE","offers":[{"title":"Default Title","offer_id":45626432028963,"sku":"PV777940","price":8.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV777940_1.jpg?v=1698780676"},{"product_id":"t-h-marine-g-force-silencer-trolling-motor-vibration-pad-red-gfes-red-dp","title":"T-H Marine G-Force SILENCER Trolling Motor Vibration Pad - Red - GFES-RED-DP","description":"\u003cp\u003e\u003cstrong\u003eG-Force SILENCER Trolling Motor Vibration Pad - Red\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe G-Force SILENCER is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER also quiets the harsh \"œclanking\" noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExtends life of trolling motor\u003c\/li\u003e\n\u003cli\u003eReduces noise and vibration\u003c\/li\u003e\n\u003cli\u003eEliminates metal-to-metal contact\u003c\/li\u003e\n\u003cli\u003ePrevents harsh clanking when stowing trolling motor\u003c\/li\u003e\n\u003cli\u003ePackage will contain product for Motorguide and Minn Kota\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"T-H MARINE","offers":[{"title":"Default Title","offer_id":45626432061731,"sku":"PV777941","price":7.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV777941_1.jpg?v=1698780677"},{"product_id":"t-h-marine-g-force-grass-goat-trolling-motor-weed-guard-f-minn-kota-large-fortrex-112-ultrex-80-112-gfgg-mkl-dp","title":"T-H Marine G-Force Grass Goat Trolling Motor Weed Guard f\/Minn Kota Large - Fortrex 112-Ultrex 80-112 - GFGG-MKL-DP","description":"\u003cp\u003e\u003cstrong\u003eG-Force Grass Goat Trolling Motor Weed Guard for Minn Kota Large - Fortrex 112-Ultrex 80-112\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.\u003c\/p\u003e\u003cp\u003eIncredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don't waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKeeps your trolling motor clear of debris\u003c\/li\u003e\n\u003cli\u003eGenuine Marine Grade\u003c\/li\u003e\n\u003cli\u003eStarboard Mounting Plate\u003c\/li\u003e\n\u003cli\u003eStainless Steel Cutting-Blade\u003c\/li\u003e\n\u003cli\u003eNOTE: This product is not compatible with Minn Kota Edge motors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"T-H MARINE","offers":[{"title":"Default Title","offer_id":45626432258339,"sku":"PV780910","price":58.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV780910_1.jpg?v=1698780660"},{"product_id":"t-h-marine-g-force-grass-goat-trolling-motor-weed-guard-f-minn-kota-small-80-101-gfgg-mks-dp","title":"T-H Marine G-Force Grass Goat Trolling Motor Weed Guard f\/Minn Kota Small 80-101 - GFGG-MKS-DP","description":"\u003cp\u003e\u003cstrong\u003eG-Force Grass Goat Trolling Motor Weed Guard for Minn Kota Small 80-101\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.\u003c\/p\u003e\u003cp\u003eIncredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don't waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKeeps your trolling motor clear of debris\u003c\/li\u003e\n\u003cli\u003eGenuine Marine Grade\u003c\/li\u003e\n\u003cli\u003eStarboard Mounting Plate\u003c\/li\u003e\n\u003cli\u003eStainless Steel Cutting-Blade\u003c\/li\u003e\n\u003cli\u003eNOTE: This product is not compatible with Minn Kota Edge motors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"T-H MARINE","offers":[{"title":"Default Title","offer_id":45626432356643,"sku":"PV780911","price":73.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV780911_1.jpg?v=1698780659"},{"product_id":"t-h-marine-troll-tamer-f-minn-kota-maxxum-trolling-motor-stabilizer-lock-5-8-spacing-rmc-101mk-dp","title":"T-H Marine Troll-Tamer f\/Minn Kota Maxxum Trolling Motor Stabilizer Lock 5\"-8\" Spacing - RMC-101MK-DP","description":"\u003cp\u003e\u003cstrong\u003eTroll-Tamer for Minn Kota Maxxum Trolling Motor Stabilizer Lock 5\"-8\" Spacing \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Troll-Tamer Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions\u003c\/p\u003e\u003cp\u003eThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models \u0026amp; Motor Guide Xi5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"T-H MARINE","offers":[{"title":"Default Title","offer_id":45626434847011,"sku":"PV795901","price":168.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV795901_4.jpg?v=1698780627"},{"product_id":"t-h-marine-troll-tamer-f-minn-kota-fortrex-trolling-motor-stabilizer-lock-3-1-2-5-spacing-rmc-104fmk-dp","title":"T-H Marine Troll-Tamer f\/Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1\/2\"-5\" Spacing - RMC-104FMK-DP","description":"\u003cp\u003e\u003cstrong\u003eTroll-Tamer for Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1\/2\"-5\" Spacing \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Troll-Tamer Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions\u003c\/p\u003e\u003cp\u003eThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models \u0026amp; Motor Guide Xi5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"T-H MARINE","offers":[{"title":"Default Title","offer_id":45626434879779,"sku":"PV795904","price":168.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV795904_4.jpg?v=1698780625"},{"product_id":"minn-kota-mka-51-quick-release-bracket-1854051","title":"Minn Kota | Quick Release Bracket | Trolling Motor Mount System | MKA-51 | 1854051","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Quick Release Bracket | Trolling Motor Mount System | MKA-51 | 1854051\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Quick Release Bracket | Trolling Motor Mount System | MKA-51 | 1854051\u003c\/strong\u003e is a highly advanced, premium marine bracket system designed specifically to handle the extreme torque and high weight loads of modern, high-thrust trolling motors. As trolling technology has advanced, bow-mount motors have become larger, heavier, and significantly more powerful, creating intense twisting and leveraging forces across a boat’s gunwale. The MKA-51 addresses this structural challenge completely by providing an ultra-stabilized, high-capacity two-piece interlocking sliding tracking matrix. The heavy lower plate anchors permanently to your boat's fiberglass or aluminum deck, while the upper structural plate bolts to the motor's base arm. When slid together, the plates interlock along reinforced, thick-walled tracking channels, creating a rock-solid, zero-flex foundation that completely eliminates deck rattle, vibrations, and shifting during sudden high-speed turns.\u003c\/p\u003e\n\n\u003cp\u003eConstructed entirely from premium, industrial-grade extruded aluminum, the MKA-51 is built for maximum strength and endurance. The assembly is treated with a heavy-duty, high-durability black powder-coated finish that provides excellent protection against corrosion, oxidation, sun fading, and mechanical scratching. A major mechanical highlight of this system is its fast-action, side-loading locking mechanism. Instead of relying on thin, loose pins, the MKA-51 utilizes a solid steel locking bar handle that secures the plates across their entire width for maximum shear strength. When you need to remove the motor for security, boat cleaning, or off-season storage, you simply swing open the locking arm and slide the motor off the track in seconds, leaving your bow flat, clean, and safe to step on. The kit comes complete with the upper motor plate, lower deck channel base, heavy-duty steel locking handle, a security hold-down strap, and premium marine-grade stainless steel hardware.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Extruded Aluminum Construction:\u003c\/strong\u003e Machined from premium-grade structural aluminum that provides maximum rigidity and eliminates structural flexing under full-throttle acceleration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Durability Black Powder Coating:\u003c\/strong\u003e Finished with an industrial-grade powder coat that seals the aluminum core from salt air corrosion, UV weathering, and heavy wear.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull-Width Solid Steel Locking Handle:\u003c\/strong\u003e Utilizes a high-strength steel locking bar that secures the plates across their entire width, delivering superior structural stability compared to standard thin pin systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstant Tool-Free Sliding Operation:\u003c\/strong\u003e Precision-machined interlocking slide channels allow you to detach or attach your heavy trolling motor from the bow deck in less than ten seconds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated Anti-Theft Padlock Security:\u003c\/strong\u003e The locking handle assembly features a pre-drilled safety hole that accommodates a standard marine padlock, locking the motor securely to the vessel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Marine Installation Hardware:\u003c\/strong\u003e Includes premium marine stainless steel nuts, bolts, and oversized backing washers required to complete a secure through-hull deck mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-51 Trolling Motor Mount System features an expanded compatibility layout engineered specifically for heavy-duty scissor-mount and cable-steer trolling motors. It is custom-machined to match the wide factory base bolt patterns of the **Minn Kota Ultrex** (including Ultrex BT and QUEST platforms) and the **Minn Kota Fortrex** series. It also provides an excellent fit for specialized saltwater variants, including the **Riptide Ultrex** and **Riptide Fortrex** lines.\u003c\/p\u003e\n\n\u003cp\u003eThanks to its reinforced thick-walled aluminum structure, the MKA-51 is fully rated and approved to support maximum power outputs, including **24-volt and 36-volt systems pushing up to 112 pounds of thrust, with extended shaft lengths up to 62 inches**. It is **not compatible** with electric-steer models like the Terrova or Ulterra, which require the narrower tracking channels of the MKA-21 or MKA-32 series brackets. It must be installed on a flat bow section for safe operation.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this MKA-51 bracket to mount a standard Minn Kota Terrova or PowerDrive motor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the MKA-51 is explicitly not compatible with electric-steer trolling motors like the Terrova, Ulterra, or PowerDrive series. Electric-steer motors utilize a completely different, elongated composite base housing with a narrow internal footprint that will not align with the wide, open-channel bolt pattern of the MKA-51. The MKA-51 is built uniquely for heavy-duty scissor-mount bases found on the Ultrex and Fortrex series. If you own a Terrova or Ulterra motor, you must select an alternative quick-release bracket designed for those specific footprints, such as the composite MKA-21 or the aluminum MKA-32 plate.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the included fabric hold-down strap in this quick-release kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe high-strength fabric strap included with the MKA-51 kit serves as a critical safety accessory designed to protect your motor during transit. When you stow your trolling motor and trailer your boat down the highway at high speeds, or drive across rough, choppy lake swells on plane, the motor head can experience intense upward bouncing forces. Wrapping this tough strap tightly around the stowed motor arm and securing it to the bracket base completely immobilizes the assembly. This neutralizes road shocks, stops the bracket from rattling, and prevents excessive wear on the internal steering gears and locking pins.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs it absolutely necessary to drill new holes in my boat deck to install the MKA-51 base plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are upgrading to the MKA-51 from a standard direct-mount setup or a different brand of bracket, you will likely need to drill new mounting holes through your fiberglass or aluminum bow deck to align with this heavy-duty plate's footprint. The lower base channel utilizes a wider structural bolt pattern to help distribute the high-torque forces of 112lb thrust motors over a larger deck surface area. Always trace the bracket's inner plate carefully, check the underside of your deck for wire looms or hull stringers before drilling, and use a high-quality marine sealant (like 3M 4200) inside the holes to ensure a waterproof seal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes this bracket feature any rubber padding to dampen motor noise while fishing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MKA-51 does not use soft rubber pads between the sliding plates, as rubber could degrade over time under high torque and cause the motor to wobble. Instead, precision engineering avoids noise through tight structural tolerances. The interlocking aluminum tracks are machined to slide together with a tight, glove-like mechanical fit. When the solid steel locking handle is pushed completely home, it cams down tightly, pulling the upper and lower plates together into a rigid, immobilized block. This metal-on-metal compression completely eliminates sliding play and prevents annoying underwater vibrations that could spook fish.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat dimensions should I check on my boat bow to ensure this large bracket will fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBefore purchasing the MKA-51, you should carefully measure the flat deck space available at the very nose of your boat’s bow. The MKA-51 base channel features a substantial footprint, measuring approximately 15.5 inches in total length by 7.75 inches in width. Because a scissor-mount trolling motor must overhang the lip of the bow slightly so the shaft clears the gunwale when deploying, you must ensure you have a flat, unobstructed structural deck area matching these dimensions to bolt the lower plate down flush and securely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48029041492259,"sku":"PV017787","price":274.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/image_4057.png?v=1713385608"},{"product_id":"minn-kota-mka-32-electric-steer-quick-release-bracket-w-cover-1854060","title":"Minn Kota | Quick Release Bracket | Electric Steer with Cover | MKA-32 | 1854060","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Quick Release Bracket | Electric Steer with Cover | MKA-32 | 1854060\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Quick Release Bracket | Electric Steer with Cover | MKA-32 | 1854060\u003c\/strong\u003e is a premium, heavy-duty marine mounting solution designed to provide boaters with maximum flexibility and security for their bow-mount trolling motors. Operating as a heavy-duty two-piece mechanical interface, this system enables the user to attach or completely remove an electric-steer trolling motor from the bow deck of their vessel in seconds, all without needing tools. For anglers navigating the challenges of public boat ramps, shared docks, or outdoor winter storage, the ability to smoothly slide an expensive motor off the deck and lock it inside a secure compartment or garage is a critical defense against opportunistic theft. Conversely, when the motor is removed, the bracket clears precious deck space on the bow platform, transforming your dedicated fishing boat into a clean, unobstructed deck space optimized for family cruising, watersports, or fly fishing where loose lines can catch on hardware.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from high-grade, black-anodized extruded aluminum, the MKA-32 is engineered to endure intense structural strain, brutal wave pounding, and heavy torque loads from high-thrust motors. Unlike plastic alternatives, this structural aluminum arm resists twisting, flexing, and rattling, ensuring a silent, factory-solid mount under full speed. A major highlight of this specific 1854060 kit is the inclusion of a tough, UV-stabilized composite side-cover plate. When the trolling motor is removed from the boat, this protective cover plates over the remaining deck-mounted puck. This shields the tracking grooves from dirt, leaves, sand, and salt spray, while presenting a clean, low-profile, and non-marring surface that won't scratch bare feet or trip passengers walking across the bow deck. The package comes completely equipped for installation, containing the top motor-mounted plate, the bottom deck-mounted base puck, the protective composite cover, a heavy-duty stainless steel locking pin, and premium marine-grade stainless steel hardware designed to prevent rust and galvanic oxidation in humid hull environments.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstant Tool-Free Motor Removal:\u003c\/strong\u003e Precision interlocking slide tracks allow boaters to mount or slide their trolling motor off the deck in under ten seconds by simply manipulating a heavy-duty locking pin.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtruded Anodized Aluminum Base Build:\u003c\/strong\u003e Crafted from premium marine-grade aluminum treated with a rugged black anodized coating to provide absolute resistance against bending, warping, structural fatigue, and harsh outdoor weathering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtective Low-Profile Deck Cover:\u003c\/strong\u003e Includes a custom-molded composite side cover that shields the deck puck when the motor is away, creating a smooth, safe, and barefoot-friendly platform.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdvanced Anti-Rattle Structural Fitment:\u003c\/strong\u003e Engineered with tight mechanical tolerances across the slide channels to absorb motor vibration and torque noise, maintaining silent stealth when hunting fish on shallow flats.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePadlock-Compatible Theft Prevention:\u003c\/strong\u003e The structural stainless steel locking pin features a built-in clearance hole designed to accept a standard short-shank padlock, locking the motor permanently to the boat deck.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Through-Hull Hardware Kit:\u003c\/strong\u003e Ships fully loaded with premium marine stainless steel bolts, nylon-locking nuts, oversized washers, and spacers needed to facilitate a clean through-hull mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-32 Quick Release Bracket features a specialized structural layout tailored specifically to match electric-steer, electronic-deploy freshwater trolling motors. It is custom-machined to align perfectly with the factory base bolt patterns of the **Minn Kota Terrova**, **Minn Kota Ulterra**, and **Minn Kota PowerDrive** series motors. It is also backward-compatible with legacy Minn Kota AutoPilot and Maxxum\/PD electric-steer configurations.\u003c\/p\u003e\n\n\u003cp\u003eIn terms of structural rating, the MKA-32 is engineered to safely support standard 12-volt, 24-volt, and 36-volt motor configurations up to **80 pounds of thrust or less, with shaft lengths measuring 60 inches or shorter**. It is **not recommended** for massive high-output 112lb thrust systems or extended 72-inch shafts, which exert extreme leverage forces that require the reinforced structural footprints of the heavy-duty MKA-53 or MKA-64 aluminum plates. This bracket requires a completely flat bow deck quadrant for proper through-hull bolting.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this aluminum MKA-32 bracket and the composite MKA-21 bracket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe primary difference comes down to material construction, structural strength, and the inclusion of the deck cover. The MKA-21 is molded from a high-yield composite polymer material, making it lightweight and completely rustproof, whereas the MKA-32 is machined from solid extruded aluminum. The aluminum build of the MKA-32 offers superior rigidity with zero flex, making it highly preferred for anglers who frequently run their boats through heavy open-water chop or high-torque situations. Additionally, the MKA-32 includes a dedicated composite deck cover to protect the base puck when the motor is detached, a feature not included with the standard MKA-21 kit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need under-deck access to install the MKA-32 base plate to my boat bow safely?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, having physical access to the underside of your bow deck is highly ideal and recommended. To handle the high-torque acceleration and sudden rotational forces generated by a trolling motor, the lower base puck must be secured through the hull using the provided stainless steel bolts, large backing washers, and nylon-locking nuts. If your bow deck is completely sealed with foam or has no access ports, you will need to install a marine inspection hatch to reach underneath, or utilize specialized heavy-duty marine blind toggle fasteners (such as well nuts) rated specifically to anchor equipment from the top down.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I buy an extra base puck separately to run one trolling motor on two different boats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. One of the best advantages of the Minn Kota quick release system is its modular flexibility. While Minn Kota does not always sell the aluminum puck as a standalone retail item, the hole patterns match standard configurations, allowing you to install a base plate on your primary bass boat and a second plate on a family pontoon or aluminum utility skiff. This allows you to shift your single, high-end Terrova or Ulterra trolling motor between both vessels in seconds, maximizing your electronics investment across your entire fleet.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat size padlock should I buy to utilize the built-in security locking feature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo secure the MKA-32 bracket against theft, you should look for a high-quality marine-grade padlock featuring a short-shank configuration with a maximum shackle diameter of 1\/4 inch. A lock constructed from solid brass, stainless steel, or boron-alloy is highly recommended to prevent the internal tumbler mechanism from freezing up due to constant exposure to moisture and rain. Avoid long-shackle padlocks, as the excess loop space will allow the lock to bounce around and slap against your fiberglass deck while running on plane, which can chip your gelcoat finish and create annoying noise.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow should I maintain the aluminum slide channels to prevent them from binding over time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the MKA-32 utilizes precision-machined aluminum-on-aluminum sliding tracks, keeping the channels free of abrasive grit is the best way to ensure smooth operation. Periodically rinse the bracket with fresh water to clear away any accumulated lake sand, mud, dried salt crystals, or pond weeds. To keep the plates sliding effortlessly, apply a thin layer of marine-grade silicone spray or dry Teflon lubricant along the tracks each season. Avoid using heavy automotive greases, as they will trap dirt and debris, creating an abrasive grinding paste that wears down the anodized finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48029135536419,"sku":"PV001637","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV1637_2.jpg?v=1713384344"},{"product_id":"minn-kota-mka-16-03-ap-pd-quick-release-bracket-1854035","title":"Minn Kota | Quick Release Bracket | AP PD Mount System | MKA-16-03 | 1854035","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Quick Release Bracket | AP PD Mount System | MKA-16-03 | 1854035\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Quick Release Bracket | AP PD Mount System | MKA-16-03 | 1854035\u003c\/strong\u003e is a legacy-certified, ultra-reliable marine mounting system engineered specifically to provide seamless quick-release functionality for Minn Kota's classic electric-steer trolling motors. Featuring a rugged, low-profile two-piece interlocking design, this bracket allows anglers to attach or completely remove their bow-mount trolling motor in seconds without using a single tool. For boaters navigating the challenges of public boat slips, shared docks, or unmonitored storage lots, the ability to smoothly detach an expensive trolling motor and store it securely inside a locked vehicle or home garage is an invaluable line of defense against theft. Additionally, when the motor is removed, the low-profile base leaves a completely flat casting deck, eliminating dangerous tripping hazards and opening up space for family cruising days or fly fishing maneuvers.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from high-grade, black-anodized extruded aluminum, the MKA-16-03 is engineered to endure significant structural strain, hull vibration, and continuous outdoor weathering without warping or fatiguing. The system features a side-loading slide design that locks firmly into place using a heavy-duty, multi-pin quick-release locking pin assembly. This ensures a tight, rattle-free connection that absorbs motor torque and maintains absolute silent stealth while tracking fish. The comprehensive AP PD Mount System comes completely packed and ready for deck installation, containing the top motor-mounted plate, the bottom low-profile deck-mounted base plate, a heavy-duty steel locking pin with a security clip, a transport stabilization tie-down strap, and premium marine-grade stainless steel hardware engineered to resist rust and corrosion in damp hull environments.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstant Tool-Free Separation:\u003c\/strong\u003e Interlocking horizontal slide plates allow boat owners to mount or slide their trolling motor off the deck in under ten seconds by simply sliding out a heavy-duty locking pin.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtruded Anodized Aluminum Arm:\u003c\/strong\u003e Built from premium marine-grade aluminum treated with a rugged black anodized coating to provide absolute resistance against bending, structural fatigue, and harsh outdoor weathering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-Profile Clear-Deck Footprint:\u003c\/strong\u003e When the motor is away, the remaining deck-mounted base plate features a smooth, low-profile design that leaves your casting platform free of tripping hazards.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePadlock-Compatible Security System:\u003c\/strong\u003e The structural stainless steel locking pin features an integrated clearance hole designed to accept a standard short-shank padlock, locking the motor permanently to the boat deck.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-Rattle Tension Engineering:\u003c\/strong\u003e Engineered with tight mechanical tolerances across the slide channels to absorb motor vibration and torque noise, maintaining silent stealth when hunting fish on shallow flats.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Marine Fastener Kit:\u003c\/strong\u003e Ships fully loaded with premium marine stainless steel bolts, nylon-locking nuts, oversized washers, and spacers needed to facilitate a clean through-hull mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-16-03 AP PD Mount System features a specialized structural layout tailored explicitly for classic and legacy electric-steer freshwater trolling motors. The pre-drilled hole configurations on the upper plate are precision-mapped to match the factory bases of the **Minn Kota PowerDrive**, **PowerDrive V2**, and **AutoPilot** series motors.\u003c\/p\u003e\n\n\u003cp\u003ePlease note that while this bracket fits standard PowerDrive models perfectly, it is **not directly compatible with the Minn Kota Terrova or Ulterra series motors**, which feature a wider, heavier composite base housing that requires the larger MKA-21 or MKA-32 quick-release brackets. The MKA-16-03 handles standard 12V and 24V motor configurations up to **70 pounds of thrust or less, with shaft lengths measuring 60 inches or shorter**. It requires a flat bow deck surface for proper through-hull bolt alignment and flush seating.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the MKA-16-03 and the newer composite MKA-21 bracket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe primary differences lie in the material composition and target motor compatibility. The MKA-16-03 is machined from solid extruded aluminum and features a narrower, legacy-style plate configuration custom-tailored specifically for the PowerDrive and AutoPilot motor lines. The MKA-21, on the other hand, is molded from a high-yield composite plastic polymer matrix and features a wider footprint designed to fit both PowerDrive and the larger Terrova motor frames. The aluminum construction of the MKA-16-03 provides a completely rigid, non-flexing link that many traditional anglers prefer for its superior durability in rough lake chop.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need under-deck access to install the lower base plate of this system to my boat bow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, having physical access to the underside of your bow deck is highly ideal and recommended. To safely handle the mechanical leverage and sudden rotational torque generated by a trolling motor, the lower base plate must be secured through the hull using the provided stainless steel bolts, large backing washers, and nylon-locking nuts. If your bow deck is completely sealed with foam or lacks internal access ports, you will need to install a marine inspection hatch to reach underneath, or utilize specialized heavy-duty marine blind toggle fasteners (such as well nuts) rated specifically to anchor equipment from the top down.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I buy an extra base plate separately to move one PowerDrive motor between two boats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. The modular design of the MKA-16-03 allows you to expand your layout by installing an independent lower base plate on your primary fishing boat and a second plate on a secondary vessel, such as an aluminum utility skiff or a family pontoon. This allows you to shift your single, high-end PowerDrive trolling motor between both watercraft in seconds by simply pulling the locking pin, allowing you to maximize your electronics investment across your entire fleet without purchasing a second expensive motor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat size padlock should I buy to utilize the built-in security locking feature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo secure the MKA-16-03 bracket against theft, you should look for a high-quality marine-grade padlock featuring a short-shank configuration with a maximum shackle diameter of 1\/4 inch. A lock constructed from solid brass, stainless steel, or boron-alloy is highly recommended to prevent the internal tumbler mechanism from freezing up due to constant exposure to moisture and rain. Avoid long-shackle padlocks, as the excess loop space will allow the lock to bounce around and slap against your fiberglass deck while running on plane, which can chip your gelcoat finish and create annoying noise.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow should I maintain the aluminum slide channels to prevent them from binding over time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the MKA-16-03 utilizes precision-machined aluminum-on-aluminum sliding tracks, keeping the channels free of abrasive grit is the best way to ensure smooth operation. Periodically rinse the bracket with fresh water to clear away any accumulated lake sand, mud, dried salt crystals, or pond weeds. To keep the plates sliding effortlessly, apply a thin layer of marine-grade silicone spray or dry Teflon lubricant along the tracks each season. Avoid using heavy automotive greases, as they will trap dirt and debris, creating an abrasive grinding paste that wears down the anodized finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48029220798755,"sku":"PV015158","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV15158.jpg?v=1713385416"},{"product_id":"minn-kota-mka-49-cable-handle-1854125","title":"Minn Kota | Trolling Motor Cable and Handle Kit | Steering Control Accessory | MKA-49 | 1854125","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Trolling Motor Cable and Handle Kit | Steering Control Accessory | MKA-49 | 1854125\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Trolling Motor Cable and Handle Kit | Steering Control Accessory | MKA-49 | 1854125\u003c\/strong\u003e is a premium, factory-certified replacement pull-cable mechanism designed to restore the deployment, retraction, and locking functionality of your heavy bow-mount trolling motor. On manual-deploy scissor mounts, the entire physical strain of stowing and deploying the heavy lower unit and shaft relies on an internal latch-pin mechanism that is triggered by pulling a long cord from the boat deck. Over multiple seasons of active tournament and recreational fishing, original factory nylon cords are subjected to intense UV weathering, dry rot, and continuous abrasion against the sharp metal edges of the bracket guide tracks. This wear and tear eventually causes the cord to fray, stretch, or snap completely, leaving you with an immobilized motor stuck in either the up or down position. The MKA-49 solves this mechanical failure perfectly, returning your deck routine to factory-smooth operation.\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty upgrade kit completely replaces the weak fabric line of standard setups by integrating an ultra-strong, jacketed stainless steel aircraft cable. This core provides an exceptional tensile strength profile that is physically incapable of stretching, fraying, or snapping, even when yanking a heavy 112lb thrust motor out of a locked downposition against rough wave waves. The cable is fully encapsulated inside a smooth, UV-stabilized polymer protective jacket that eliminates metal-on-metal scratching along your aluminum mount tracks. The package comes completely equipped for an instant, drop-in hardware refresh out of the box, containing the premium jacketed stainless steel cable, an oversized ergonomic high-impact composite T-handle that fits comfortably in large gloved hands, an adjustable cable clamp collar, and an inline protective bumper washer.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJacketed Stainless Steel Aircraft Cable:\u003c\/strong\u003e Upgrades your standard fabric pull cord to an industrial-grade braided steel cable core that fully eliminates fraying, stretching, and snapping under heavy loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOversized Ergonomic T-Handle:\u003c\/strong\u003e Features a rugged, high-impact composite pull handle molded with deep finger grooves to provide a comfortable, non-slip mechanical grip in wet or freezing weather.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtective Protective Polymer Armor:\u003c\/strong\u003e The steel cable is fully encased in a smooth synthetic jacket that blocks out moisture and protects your trolling motor mount’s anodized finish from metal abrasion scuffs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable Cable Length Collar:\u003c\/strong\u003e Includes a high-security compression clamp that allows you to easily adjust and lock the cable length to perfectly match your boat's deck height and casting layout.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrevents On-Water Motor Jams:\u003c\/strong\u003e Restores immediate, smooth activation to the internal latch-pin mechanism, ensuring your motor stows and deploys flawlessly with a single motion.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComprehensive OEM Replacement Pack:\u003c\/strong\u003e Arrives fully loaded from the factory with the cable, molded handle, steel compression set screws, and an inline protective bumper washer for a tool-free hardware refresh.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-49 Cable and Handle Kit features extensive cross-platform compatibility across Minn Kota’s heavy-duty freshwater and saltwater bow-mount trolling motor families. It is custom-engineered to line up perfectly with all generations of manual-deploy scissor mounts, including the elite **Minn Kota Fortrex** and **Minn Kota Maxxum** series motors. It is also fully compatible with saltwater variants, including the **Riptide Fortrex (SF)** and **Riptide Maxxum (SM)** series.\u003c\/p\u003e\n\n\u003cp\u003ePlease note that this pull-cable layout is designed uniquely for mechanical scissor brackets and is **completely incompatible** with electric-steer, electronic-deploy motor lines such as the Minn Kota Terrova, Ulterra, or PowerDrive series, which rely on independent internal motorized servo gears or manual foot-pedal release levers rather than an external pull cord. The high-purity tinned and jacketed properties of the cable make it fully approved for use in both freshwater lakes and high-salinity coastal marine zones.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the cable length to fit my specific boat deck configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdjusting the cable length on the MKA-49 is fast and simple. First, thread the raw end of the jacketed steel cable through the internal latch-release mechanism on your trolling motor base bracket. Next, pull the cable until it has just enough slack to allow the internal latch pin to fully lock and unlock when you pull the handle. Slide the included adjustable steel compression collar up the cable until it rests tight against your handle base, and use an Allen wrench to tighten the dual set screws down firmly. Once the collar is locked onto the steel core, use sharp wire cutters to trim away any excess remaining cable tail.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill the stainless steel core rust or freeze up after constant exposure to coastal salt air?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the Minn Kota MKA-49 is built specifically to handle the extreme elements of harsh saltwater coastal environments. The internal core is braided from high-grade marine stainless steel that resists pitting and rust, while the outer shell is fully sealed inside a smooth polymer protective jacket that prevents corrosive salt crystals or moisture from ever making direct physical contact with the metal strands. To ensure maximum smooth travel through the bracket guide rollers, simply rinse the cable down with fresh water along with the rest of your boat deck after each trip.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the small rubber washer included inside this replacement kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe small rubber washer serves as an inline protective shock absorber bumper. During installation, this washer slides onto the cable section positioned directly between the trolling motor mount bracket frame and the adjustable compression collar of the T-handle. When you pull the handle hard to stow your motor, or when the cable snaps back into position after deployment, this rubber washer cushions the impact. This prevents the composite handle from smashing directly against the hard metal edges of the bracket, eliminating cracks and absorbing vibrations during trailering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I install this cable without completely unbolting my trolling motor from the bow deck?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. You can easily install the MKA-49 replacement kit while your trolling motor remains permanently bolted to your bow deck casting platform. Simply deploy the trolling motor into its vertical running position to open up the internal tracks of the mount frame. Cut away the old broken or frayed fabric cord from the internal pull bracket, thread the raw end of the new MKA-49 jacketed steel cable through the guide rollers and into the latch pin loop, secure it via the compression collar, and verify smooth travel before locking it down.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the composite T-handle buoyant enough to float if the cable snaps or falls into the water?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the oversized composite T-handle is molded from a high-impact, lightweight polymer blend, it is structurally dense to ensure it doesn't crack under heavy manual strain, meaning it is not natively buoyant on its own. However, because the cable is permanently anchored inside your trolling motor mount housing on the bow deck, there is zero risk of the handle falling overboard into the lake during normal operation. The only way the handle could fall into the water is if the high-strength steel cable itself snapped, which is physically impossible under standard manual fishing operations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48029220864291,"sku":"PV010274","price":84.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV10274_8.jpg?v=1713385060"},{"product_id":"minn-kota-mkp-37-power-prop-1865022","title":"Minn Kota | Power Prop | High Thrust Trolling Motor Propeller | MKP-37 | 1865022","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Power Prop | High Thrust Trolling Motor Propeller | MKP-37 | 1865022\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Power Prop | High Thrust Trolling Motor Propeller | MKP-37 | 1865022\u003c\/strong\u003e is a high-efficiency, tournament-grade replacement propeller designed to deliver maximum propulsion, extra pushing power, and optimal battery efficiency for your Minn Kota trolling motor. Operating as an authentic OEM structural component, this 2-blade prop features an aggressive, high-torque blade geometry designed specifically to move heavy boat hulls through windy conditions, strong river currents, and rolling lake swells. Over multiple seasons of active fishing, original props can become nicked by submerged rocks, scarred by gravel, or warped by heavy wraps of discarded fishing line. These small cosmetic imperfections introduce substantial underwater drag and imbalances, causing your trolling motor to vibrate loudly, drain your batteries prematurely, and lose critical thrust. The MKP-37 restores your lower unit back to factory-fresh efficiency.\u003c\/p\u003e\n\n\u003cp\u003eMolded from a proprietary, glass-reinforced composite polymer matrix, the Power Prop features an exceptional strength-to-weight ratio. The material is engineered to remain perfectly rigid under full-throttle acceleration, completely eliminating blade flex to translate every ounce of rotational energy directly into forward or reverse movement. A major highlight of the MKP-37 design is its sweeping, extra-wide blade profile, which is highly optimized for slicing through thick freshwater vegetation, hydrilla, and lily pads without bogging down the electric motor. The comprehensive replacement kit comes completely ready for installation, containing the standalone premium black 2-blade propeller, an authentic steel prop pin (shear pin), a heavy-duty brass prop nut, and a premium flat washer, ensuring a complete hardware overhaul during your prop swap.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Torque 2-Blade Power Design:\u003c\/strong\u003e Engineered with a wide, aggressive blade geometry that maximizes raw pushing power and open-water acceleration for heavy tournament boat setups.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlass-Reinforced Composite Build:\u003c\/strong\u003e Molded from an advanced, high-density polymer matrix that resists impact chipping, warping under heavy load, and structural degradation over time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeed-Slicing Blade Optimization:\u003c\/strong\u003e Swept-back blade edges are custom-angled to cleanly cut through thick hydrilla, lily pads, milfoil, and heavy freshwater vegetation without wrapping or stalling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Installation Hardware Kit:\u003c\/strong\u003e Arrives fully loaded from the factory with a replacement steel shear pin, a heavy-duty brass prop nut, and a custom flat backing washer for a tool-free hardware refresh.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximizes Battery Lifespan:\u003c\/strong\u003e Precision-balanced to eliminate lower-unit wobbling and excessive drag, reducing the amp draw on your deep-cycle batteries to extend your runtime on the water.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAuthentic OEM Part Matching:\u003c\/strong\u003e Certified as an original Minn Kota manufacturer accessory, guaranteeing an absolute, perfect physical seat onto your trolling motor's armature shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota Power Prop MKP-37 (part number 1865022) features a highly specific compatibility layout centered around the diameter of your trolling motor's lower unit torpedo housing. It is engineered explicitly to fit Minn Kota motors utilizing a \u003cstrong\u003e3-5\/8 inch motor diameter hub\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThis includes extensive compatibility with specific power brackets across the modern **Minn Kota PowerDrive**, **PowerDrive V2**, **Terrova**, **AutoPilot**, and **Maxxum** series motors that carry a **55lb, 65lb, or 70lb thrust rating**. It is critical to note that the MKP-37 **will not fit** smaller 12V 30lb to 45lb thrust motors (which use a 3-1\/4 inch hub, like the MKP-2) and it **is completely incompatible** with heavy-duty 80lb or 112lb thrust motors (which utilize a larger 4-inch hub, like the MKP-33 or MKP-38). Always verify your specific motor's thrust rating and hub diameter before completing a replacement order. It is completely rated for use in both freshwater and saltwater motor lines.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the small steel pin included in the prop kit, and how do I replace it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe small steel pin is called a shear pin, and it serves as a critical mechanical safety fuse designed to protect your trolling motor's internal armature shaft from catastrophic structural damage. When you are running your motor and the spinning prop violently strikes a solid underwater hazard—such as a large rock, concrete boat ramp, or a heavy submerged log—the shear pin is engineered to snap in half intentionally. This break decouples the prop from the engine, preventing the high-impact shock from bending the main steel drive shaft or shattering the internal magnets. To replace it, simply slide the old broken pieces out of the hole in the shaft, slide the new pin in horizontally, and align the groove on the back of the MKP-37 prop directly over the pin.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow tightly should I screw down the brass prop nut when installing the MKP-37?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen fastening the heavy-duty brass prop nut onto the threaded end of your trolling motor shaft, it is vital to tighten it down securely without crushing the components. Using a standard 1\/2-inch wrench or a specialized Minn Kota prop wrench tool, tighten the nut clockwise until it makes firm physical contact with the flat washer and the propeller hub, then give it an additional 1\/4 to 1\/2 turn to lock it in place. Never use a high-powered electric impact driver to tighten the prop nut, as excessive mechanical torque can easily strip the brass threads, snap the armature tip, or crack the composite plastic hub of your brand new propeller.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the performance difference between this 2-blade Power Prop and a 3-blade Weedless Wedge prop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choice between a 2-blade Power Prop (MKP-37) and a 3-blade Weedless Wedge prop (like the MKP-32) comes down to your primary operating environments and speed tactics. A 2-blade Power Prop features wider, more aggressive individual blades that capture a larger volume of water, making it superior for achieving maximum top-end speed, accelerating quickly, and pushing heavy boat hulls against strong river currents or high wind drift lines. A 3-blade Weedless Wedge prop focuses its geometry on extreme weed evasion, using swept-back curved blades to push away thick vegetation without wrapping, but it sacrifices a slight amount of raw top-end forward thrust to achieve that stealth.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy is my trolling motor vibrating loudly after installing this new replacement prop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your trolling motor exhibits a loud humming noise or heavy physical vibration after installing the MKP-37, it is typically caused by one of two installation alignment issues. First, check to ensure that the internal steel shear pin is sitting perfectly centered inside its shaft slot and has not slid slightly to one side, which will cause the propeller to seat crookedly. Second, inspect the prop shaft itself for any tangled loops of braided fishing line wrapped behind the prop. A buildup of compressed fishing line can push the prop forward out of balance and can quickly destroy the lower unit's rubber oil seals, allowing water to leak into the electric motor compartment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I safely use this black replacement propeller on a white Minn Kota Riptide saltwater motor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. From a purely structural, mechanical, and physical standpoint, the MKP-37 Power Prop is fully compatible with white Minn Kota Riptide saltwater trolling motor models, provided the Riptide motor carries a matching 55lb, 65lb, or 70lb thrust rating with a 3-5\/8 inch hub diameter. Minn Kota’s composite props are completely inert and non-metallic, meaning they contain no components that can rust, pit, or suffer from galvanic corrosion in high-salinity coastal bays. The only difference is cosmetic—installing this black prop onto a white Riptide lower unit will create a black-and-white contrast layout, but it will deliver the exact same high-thrust performance on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48029221421347,"sku":"PV004706","price":45.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV4706_3.jpg?v=1713384587"},{"product_id":"minn-kota-mka-50-bow-mount-stabilizer-kit-f-fortrex-1862050","title":"Minn Kota | Bow Mount Stabilizer Kit | Fortrex Compatible Support Kit | MKA-50 | 1862050","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Bow Mount Stabilizer Kit | Fortrex Compatible Support Kit | MKA-50 | 1862050\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Bow Mount Stabilizer Kit | Fortrex Compatible Support Kit | MKA-50 | 1862050\u003c\/strong\u003e is a heavy-duty mechanical hardware upgrade designed to solve one of the most destructive issues bow-mount trolling motors face: extreme deck bounce and structural vibration during boat transport. When traveling across choppy open water at high speeds or trailering your vessel down rugged highways, a stowed trolling motor head overrides the bow, acting as a heavy counterweight. Without proper support, this overhang creates intense leverage, causing the motor head, composite shaft, and bracket housing to bounce violently against your boat's gunwale. This constant hammering can crack fiberglass decks, warp aluminum mounts, strip internal steering gears, and destroy sensitive internal components like GPS modules and sonar transducers. The Minn Kota MKA-50 solves this completely by serving as a rock-solid structural support rod that anchors the stowed motor assembly directly to the deck floor.\u003c\/p\u003e\n\n\u003cp\u003eThe stabilizer kit mounts cleanly to either the left or right side of the trolling motor's lower spring guard or bowguard bracket housing. When the trolling motor is retracted into its stowed position, the MKA-50 swings vertically, seating its soft rubber bumper cap firmly onto the boat's deck to absorb all downward jarring forces. When the trolling motor is deployed into the water, the stabilizer rod pivots smoothly into a horizontal stance parallel with the bowguard, staying completely out of your way and preventing line snags while fishing. The kit features a heavy-duty threaded steel rod that can be cut to length to perfectly match your specific bow clearance profile. It comes out of the box complete with marine-grade stainless steel hardware that is fully tested and certified for harsh saltwater use, a durable composite mounting arm, and a non-marring rubber deck bumper that cushions your boat's gelcoat or aluminum skin.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEliminates Damaging Motor Bounce:\u003c\/strong\u003e Provides an absolute, vertical structural pillar that supports the stowed trolling motor head, absorbing harsh impacts from rough road travel and heavy waves.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustomizable Cut-to-Length Rod:\u003c\/strong\u003e Features a robust threaded support rod that can be measured and cut with a standard hacksaw to perfectly match your vessel's deck-to-mount clearance height.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutomatic Pivoting Motion Tracking:\u003c\/strong\u003e Swings into a vertical support stance automatically when the motor is stowed, and rotates cleanly into a horizontal position out of the way when the motor is deployed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSaltwater-Tested Stainless Hardware:\u003c\/strong\u003e Outfitted with premium stainless steel fasteners, washers, and pivot pins engineered to resist pitting, rust, and galvanic oxidation in harsh coastal environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-Marring Soft Rubber Bumper:\u003c\/strong\u003e Equipped with a thick, durable rubber base cap that cushions the deck contact point, preventing scratches, scuffs, or discoloration on marine gelcoats and carpets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Side Flexible Mounting Options:\u003c\/strong\u003e Versatile structural layout allows the stabilizer arm to bolt easily onto either the left (port) or right (starboard) side of the lower bowguard bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-50 Bow Mount Stabilizer Kit features a highly focused compatibility profile tailored specifically for Minn Kota's premium scissor-style and heavy-duty spring-guard bow mounts. It is fully compatible with all generations of the **Minn Kota Ultrex** series (including Ultrex BT and the newer Ultrex QUEST platforms) and the **Minn Kota Fortrex** series. It also fits perfectly onto specialized saltwater variants, including the **Riptide Ultrex** and the **Riptide Fortrex (SF)** bow-mount models.\u003c\/p\u003e\n\n\u003cp\u003ePlease note that this stabilizer layout is designed uniquely to bolt onto the cast-aluminum spring guard framework used on Ultrex and Fortrex models. It is **not compatible** with electric-steer composite pivot mounts, such as those found on the Minn Kota Terrova, Ulterra, PowerDrive, or standard Edge series motors, which utilize different travel paths and require the alternative MKA-29 or MKA-55 stabilizer bars. The MKA-50 can be installed over marine carpets, vinyl flooring, or raw fiberglass decks, adapting smoothly to any structural interior bow contour.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I accurately measure and cut the threaded rod to fit my specific boat deck?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo cut the threaded rod accurately, first mount the trolling motor to your bow deck and retract it fully into its locked, stowed position. Assemble the MKA-50 bracket to your bowguard, insert the full-length threaded rod with the rubber bumper attached, and let the bumper rest flat on your deck surface. Mark the rod at a point exactly 3\/4 inch to 1 inch *above* the entry point of the stabilizer bracket arm. This extra length is critical because it leaves enough thread clearance to make fine-tune height adjustments later. Remove the rod, cut it cleanly at your mark using a standard hacksaw, file away any sharp metal burrs, and thread it back into the locking collar to complete the setup.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill the rubber bumper leave dark scuff marks or stains on my white fiberglass boat deck?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the soft rubber bumper cap included with the Minn Kota MKA-50 kit is molded from a high-quality, non-marking composite rubber compound. It is specifically formulated for high-end marine use and will not leach color oils, scuff your white gelcoat, or stain marine carpeting, even under the intense heat and crushing pressure of trailering over long distances. To ensure the bumper functions perfectly, keep the deck contact surface clean and free of abrasive sand or grit that could act like sandpaper under heavy hull vibrations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I install this stabilizer kit if my trolling motor is mounted on a quick-release plate?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. Because the MKA-50 stabilizer kit bolts directly onto the upper pivoting frame of the trolling motor's bowguard bracket rather than being permanently hard-mounted to the boat deck itself, it moves along with the motor. When you slide your trolling motor off its quick-release plate (such as an MKA-21 or RTA-19) for storage or security, the entire stabilizer assembly lifts away cleanly with the motor, leaving your deck completely clear and unobstructed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this stabilizer arm necessary if I only fish on calm, flat freshwater lakes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile you may experience less wave bounce on calm waters, a stabilizer kit is still highly recommended to protect your motor during highway trailering. Towing your boat down the road exposes the stowed trolling motor to high-frequency vibrations, potholes, expansion joints, and sudden bumps. Over thousands of highway miles, this constant rattling wears out internal motor components and loosens deck mounting bolts. Installing the MKA-50 ensures that your trolling motor is fully supported and immobilized during transit, regardless of water or road conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat should I do if the stabilizer rod feels loose or backs out after driving down the highway?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the stabilizer rod begins to loosen or spin out of adjustment, it is typically because the locking hardware was not fully tightened during installation. The MKA-50 kit includes heavy-duty lock washers and hex jam nuts designed to lock the threaded rod into position. Ensure that you tighten the hex jam nut firmly against the composite bracket arm using a standard wrench to lock the threads in place. For added security under extreme road vibration, applying a single drop of medium-strength blue thread-locking compound (such as Loctite 242) to the metal threads will keep the rod perfectly set until adjusted manually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48029221650723,"sku":"PV010275","price":81.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV10275_8.jpg?v=1713385061"},{"product_id":"minn-kota-mka-45-rope-handle-1854120","title":"Minn Kota | Trolling Motor Rope and Handle Kit | MKA-45 | 1854120","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Trolling Motor Rope and Handle Kit | MKA-45 | 1854120\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Trolling Motor Rope and Handle Kit | MKA-45 | 1854120\u003c\/strong\u003e is an authentic, tournament-grade marine maintenance replacement accessory engineered to restore the manual deployment and retraction functionality of your bow-mount trolling motor. On heavy mechanical scissor mounts, the entire physical process of stowing and deploying the motor requires triggering an internal spring-loaded locking latch pin. This pin is activated exclusively by pulling a long pull-cord from the boat deck casting platform. Over multiple seasons of active fishing, standard factory cables are subjected to intense structural weathering, midday UV breakdown, rot, and continuous abrasive friction against the sharp metal guide tracks of the aluminum frame. This wear and tear eventually causes the cord to stretch out, fray, or snap completely, leaving you with an immobilized motor jammed on your deck. The MKA-45 provides a complete drop-in hardware refresh to return your deck routine back to factory stability.\u003c\/p\u003e\n\n\u003cp\u003eUnlike cheap aftermarket ropes or thin hardware store cords that rapidly slip or degrade, this factory-certified OEM kit features an extra-thick, multi-braid nylon rope layout. This advanced weave provides a high tensile strength profile that resists stretching and snapping, even when violently yanking a heavy high-thrust motor out of a tight stow-lock position in rolling open-water wave chop. The kit features a premium, ergonomic oversized T-handle molded from high-impact composite polymer blocks. This handle is detailed with deep non-slip finger channels that provide an absolute, secure manual grip when operating with cold hands, slime-coated gloves, or during heavy downpours. The comprehensive retail package comes fully loaded from the factory and is ready for immediate tool-free installation, containing the heavy-duty tinned multi-braid cord, the molded ergonomic handle, and a zinc-plated steel cable clamp collar to lock your cord length safely into position.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePremium Multi-Braid Nylon Weave:\u003c\/strong\u003e Heavy-duty braided nylon line delivers superior tensile strength and abrasion resistance, fully eliminating line stretching and unexpected snapping under high manual loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOversized Ergonomic T-Handle:\u003c\/strong\u003e Features a rugged, high-impact composite pull handle molded with deep finger grooves to provide a comfortable, non-slip mechanical grip in wet or freezing weather.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV-Stabilized Rot Resistance:\u003c\/strong\u003e Chemically treated with advanced marine-grade protective coatings that fully prevent material dry rot, sun fading, and decay from damp bow storage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable Zinc-Plated Cable Clamp:\u003c\/strong\u003e Includes an adjustable metal compression collar block that allows you to easily adjust and lock the cable length to perfectly match your boat's deck height.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRestores Latch Pin Activation:\u003c\/strong\u003e Restores immediate, smooth activation to the internal latch-pin mechanism, ensuring your motor stows and deploys flawlessly with a single fluid pull motion.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Scissor Mount Retrofitting:\u003c\/strong\u003e Standard design parameters allow for seamless installation across a massive array of manual-deploy bow mounts, removing the need for custom deck brackets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComprehensive DIY Installation Kit:\u003c\/strong\u003e Ships fully loaded from the factory with the extended multi-braid rope, high-impact handle, and securing clamp for an immediate dockside hardware refresh.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-45 Rope and Handle Kit features an exceptionally wide cross-platform compatibility matrix across Minn Kota’s structural manual-deploy bow mounts. It is custom-engineered as a direct factory replacement for all generations of scissor-bracket mounts, including the elite **Minn Kota Fortrex** and **Minn Kota Maxxum** series trolling motors. It is also fully approved for use on saltwater variants, including the **Riptide Fortrex (SF)** and **Riptide Maxxum (SM)** series motors.\u003c\/p\u003e\n\n\u003cp\u003ePlease note that this pull-cable layout is designed uniquely for mechanical scissor brackets and is **completely incompatible** with electric-steer, electronic-deploy motor lines such as the Minn Kota Terrova, Ulterra, or PowerDrive series, which rely on independent internal motorized servo gears or manual foot-pedal release levers rather than an external pull cord. The high-purity materials make it fully qualified for use in both freshwater lakes and high-salinity coastal marine zones.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I adjust the rope length to match my specific boat deck height and console setup?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdjusting the rope length on the MKA-45 is fast and simple. First, thread the raw end of the heavy-duty nylon rope through the internal latch-release mechanism loop on your trolling motor base bracket. Next, pull the rope until the handle sits at your preferred ergonomic height on the bow deck when the motor is fully deployed. Slide the included zinc-plated metal clamp collar up the rope until it rests tight against your handle base, and use pliers to crimp or tighten the compression clamp down firmly. Once the collar is locked onto the nylon core, use a knife to trim away any excess remaining rope tail, and melt the tip with a lighter to prevent fraying.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill the nylon rope rot or degrade if left exposed on an open boat deck all season?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the premium multi-braid rope included in the MKA-45 kit is manufactured from high-purity industrial nylon that is specifically treated with advanced UV inhibitors and marine-grade rot protection. This ensures the line remains fully flexible and structurally intact even when subjected to continuous direct sunlight, blistering midday heat, heavy downpours, and damp winter storage lockers. To maximize the service life of your cord, simply wipe down the line occasionally with a damp cloth to clear away dried lake algae or mud that could grind against the bracket rollers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I install this replacement rope kit without unbolting my trolling motor from the bow?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. You can easily install the MKA-45 replacement rope and handle kit while your trolling motor remains permanently bolted to your bow deck casting platform. Simply deploy the trolling motor into its vertical running position to open up the internal tracks of the mount frame. Cut away the old broken or frayed fabric cord from the internal pull bracket, thread the raw end of the new tinned multi-braid nylon cable through the guide rollers and into the latch pin loop, secure it via the compression collar, and verify smooth travel before locking it down.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the best way to prevent the rope from fraying where it runs through the aluminum mount frame?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MKA-45 rope is built to withstand high friction, but over multiple seasons, rough casting edges or built-up grit on your trolling motor frame can accelerate wear. During installation, closely inspect the metal guide tracking slot or roller wheel where the rope exits the mount frame. If you notice any sharp aluminum burrs or rough paint oxidation, use a piece of fine-grit sandpaper to smooth out the edge. Ensuring the guide path is completely smooth and free of debris will eliminate unnecessary friction and extend the operational lifespan of your replacement rope.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the composite T-handle buoyant enough to float if it slips out of my hand into the lake?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the oversized composite T-handle is molded from a high-impact, lightweight polymer blend, it is structurally dense to ensure it doesn't crack under heavy manual strain, meaning it is not natively buoyant on its own. However, because the rope is permanently anchored inside your trolling motor mount housing on the bow deck, there is zero risk of the handle falling overboard into the lake during normal operation. The only way the handle could fall into the water is if the high-strength nylon rope itself snapped, which is prevented by the MKA-45's heavy-duty multi-braid construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48029258219811,"sku":"PV009037","price":16.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV9037_7.jpg?v=1713384957"},{"product_id":"minn-kota-powerdrive-bluetooth-foot-pedal-acc-corded-1866070","title":"Minn Kota | PowerDrive Foot Pedal | Bluetooth | Corded | 1866070","description":"\u003cp\u003e\u003cb\u003eMinn Kota | PowerDrive Foot Pedal | Bluetooth | Corded | 1866070\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | PowerDrive Foot Pedal | Bluetooth | Corded | 1866070\u003c\/strong\u003e is a highly responsive, low-profile mechanical control center designed to deliver effortless, hands-free steering and speed navigation for your Bluetooth-enabled PowerDrive trolling motor. For anglers operating from the bow casting platform, having a dependable foot pedal means you can completely focus your attention on rod presentation, structural mapping, and landing fish rather than manually turning an engine tiller handle. The 1866070 pedal utilizes an ergonomic, low-profile design that minimizes foot and ankle fatigue during long, grueling days on the water. It features a reliable side-to-side steering pedal interface that responds instantly to foot movements, complemented by a precise, infinite variable speed control adjustment wheel located directly on the side of the composite frame.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from a high-impact, UV-stabilized composite polymer matrix, this industrial-grade foot pedal is explicitly engineered to withstand the brutal realities of open-deck marine use, including heavy rainstorms, intense midday heat, and tracking mud from wet boots. The system functions via a heavy-duty 18-foot cord fitted with a waterproof, keyed multi-pin connector plug that links directly into the internal accessory port of your trolling motor's base housing. This corded infrastructure completely eliminates the worry of wireless pairing drops or internal dead batteries, providing an absolute, low-resistance hardwired connection that functions flawlessly every time you step on the deck. It also includes an integrated momentary\/constant activation toggle switch, allowing you to choose between short bursts of propulsion or a continuous tracking speed line across large fishing flats.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHands-Free Precision Steering Control:\u003c\/strong\u003e High-grip ergonomic pedal allows for effortless side-to-side directional steering adjustments using simple, intuitive toe-and-heel pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInfinite Variable Speed Adjuster Wheel:\u003c\/strong\u003e Outfitted with an easy-access lateral speed wheel that enables ultra-precise, micro-adjustments to your trolling speed to counter wind drift or current.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMomentary and Constant Power Toggle:\u003c\/strong\u003e Features an integrated selector switch that allows for quick transitions between a continuous power track for long trolling runs or short, momentary bursts for fine adjustments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-Duty 18-Foot Connecting Cord:\u003c\/strong\u003e Ships pre-wired with 18 feet of heavily insulated marine-grade cable, providing ample slack to position the pedal anywhere on the bow deck platform.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather-Sealed Waterproof Components:\u003c\/strong\u003e The internal electronic switches and speed potentiometers are fully encapsulated and potted to repel moisture, heavy rain, morning dew, and wave splashes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndestructible Composite Frame:\u003c\/strong\u003e Molded from a rugged, automotive-grade polymer shell that completely resists impact cracking, sun fading, and structural scratching from boots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota 1866070 Foot Pedal operates on a specific electronic protocol and carries a highly targeted compatibility matrix. It is custom-engineered and certified compatible \u003cstrong\u003eonly with Bluetooth-enabled Minn Kota PowerDrive and Riptide PowerDrive trolling motor models manufactured from 2017 through 2023\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eIt is vital to recognize that this pedal features a modern multi-pin round plug and is \u003cstrong\u003ecompletely incompatible with older legacy, non-Bluetooth PowerDrive, PowerDrive V2, or Pontoon PowerDrive systems manufactured in 2016 or older\u003c\/strong\u003e, as those older generations utilize an entirely different electrical wiring schema and flat-pinned rectangular connectors. Furthermore, it does not fit or control Minn Kota Terrova, Ulterra, or QUEST series motors, which rely on independent, specialized pedal layouts. It can be installed directly into recessed deck footwells or used loosely on standard marine carpet, vinyl, or fiberglass decks.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this foot pedal require internal AA or AAA batteries to function on my boat deck?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the Minn Kota 1866070 foot pedal does not require any internal batteries, charging docks, or external power cells to operate. It is a completely hardwired accessory that draws the minimal operational current required to transmit steering and speed signals directly from your trolling motor head through its integrated 18-foot connecting cable. This layout provides an incredible advantage for tournament and weekend anglers alike, as it eliminates the risk of wireless connectivity dropouts, radio frequency interference, or dead batteries cutting your fishing trip short while out on the water.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use this foot pedal alongside my wireless i-Pilot or i-Pilot Link remote control at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. The internal computer board inside Bluetooth-enabled PowerDrive trolling motors is fully engineered to accept multiple command inputs simultaneously. You can leave this corded foot pedal connected to the base of your motor on the bow deck for immediate hands-free steering while actively casting, while simultaneously wearing your wireless i-Pilot or i-Pilot Link handheld remote on its neck lanyard. The motor will instantly respond to whichever device receives a command input, allowing you to trigger Spot-Lock from your remote and quickly adjust your steering vector with your foot without toggling any menus.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat should I do if the steering feels sluggish or the motor fails to respond when I press the pedal down?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you experience any lag or a total lack of response from your trolling motor, first check the physical connection point at the base of the motor housing. Unplug the round multi-pin connector and inspect the internal gold-plated pins for any signs of trapped water, mud, or green\/white corrosion scale. Clean the pins gently using a dry cotton swab and a drop of marine electronics cleaner. When reconnecting, ensure that the internal alignment key lines up perfectly, push the plug firmly into the socket, and hand-tighten the external locking collar completely to form an absolute, watertight seal against the internal rubber O-ring.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this foot pedal fully waterproof, and is it safe to leave exposed on my deck during winter storage?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the internal electrical switches, speed dials, and electronic components inside the 1866070 pedal are fully weather-sealed and potted to easily survive heavy rain, snow, and deck washing, it is not designed to be completely submerged in standing puddles of water. For off-season winter storage or when trailering your boat long distances down the highway, it is highly recommended to unplug the pedal, roll up the 18-foot cable safely, and store the pedal inside a dry, temperature-controlled environment like a rod locker or garage to maximize its service life and prevent intense UV weathering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I install this foot pedal inside a standard recessed bow deck well?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the Minn Kota 1866070 features a highly compact, streamlined, and low-profile footprint that fits comfortably inside the vast majority of aftermarket and factory-installed recessed bow deck footwells found on modern bass boats and fiberglass multi-species rigs. Dropping your foot pedal into a recessed well is an excellent ergonomic upgrade because it allows you to operate the heel-toe steering axis while keeping both of your feet perfectly level, which drastically reduces lower back strain and improves your physical balance while casting in heavy wave chop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48046627946787,"sku":"PV015160","price":159.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV15160.jpg?v=1713385417"},{"product_id":"minn-kota-mka-23-qrb-1854023","title":"Minn Kota | Quick Release Bracket | QRB Mount System | MKA-23 | 1854023","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Quick Release Bracket | QRB Mount System | MKA-23 | 1854023\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Quick Release Bracket | QRB Mount System | MKA-23 | 1854023\u003c\/strong\u003e is an ultra-rugged, tournament-grade marine mounting accessory engineered to provide quick-release functionality for high-power, heavy-duty trolling motors. For professional bass anglers, walleye tournament pros, and weekend boaters operating heavy rigs, a trolling motor is a massive investment that requires a rock-solid foundation. The MKA-23 provides an absolute, non-flexing interface consisting of an interlocking two-piece sliding bracket layout. The heavy lower base plate bolts permanently through your boat's bow deck, while the upper top plate secures directly to the chassis of your trolling motor. By sliding the top plate into the base channel and inserting the heavy-duty steel locking handle, your motor is completely locked down and immobilized, completely eliminating deck vibration and flexing when running at maximum speed or navigating heavy waves.\u003c\/p\u003e\n\n\u003cp\u003eMachined entirely from premium, high-tensile extruded aluminum, the MKA-23 features a thick-walled structural cross section engineered to handle extreme mechanical leverage. The aluminum is treated with a specialized hard-coat anodized layer, providing exceptional protection against scratching, weathering, and harsh outdoor exposure. When you return from a trip or park your boat at a public marina dock, you can pull the locking pin, slide the motor back along the track, and lift it off the deck in seconds to prevent theft or clear the bow for winter boat cover installation. The comprehensive QRB mount system includes the upper motor plate, the lower deck base plate, a heavy-gauge steel locking handle clip, a fabric hold-down strap to dampen trailering vibrations, and a complete assortment of marine stainless steel mounting fasteners.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Tensile Extruded Aluminum Build:\u003c\/strong\u003e Engineered from structural-grade marine aluminum that delivers superior strength and zero flex, easily managing the extreme torque generated by high-thrust motors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStreamlined Slide-Track Tracking:\u003c\/strong\u003e Interlocking horizontal slide plates allow for fast, tool-free installation and removal of your bow-mount trolling motor in less than ten seconds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard-Anodized Protective Finish:\u003c\/strong\u003e Coated with a premium black anodized layer that shields the aluminum core from corrosion, sun fading, and mechanical scratching.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-Gauge Steel Locking Pin:\u003c\/strong\u003e Outfitted with an industrial steel locking pin assembly that locks the plates together tightly, preventing lateral shifting or vibration during operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePadlock-Ready Anti-Theft Guard:\u003c\/strong\u003e The locking handle features a pre-drilled clearance hole designed to accept a marine padlock, allowing you to permanently lock the motor to your deck for security.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComprehensive Vibration Management:\u003c\/strong\u003e Includes a heavy-duty fabric strap designed to wrap around the stowed motor assembly, neutralizing structural shocks during high-speed highway trailering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-23 QRB Mount System features a specialized structural footprint designed specifically to accommodate high-thrust manual-deploy and scissor-mount trolling motors. It is custom-machined to line up perfectly with the factory base bolt configurations of the elite **Minn Kota Fortrex** and **Minn Kota Maxxum** series motors. It is also fully compatible with standard **Minn Kota Edge** bow-mount models.\u003c\/p\u003e\n\n\u003cp\u003eDue to its high-strength extruded aluminum construction, the MKA-23 is safety-rated and fully approved to support high-power systems, including **24-volt and 36-volt motors pushing up to 80 pounds of thrust or less, with standard shaft lengths up to 60 inches**. It is **not compatible** with electric-steer models like the Terrova or Ulterra, which use a narrower base footprint and require the alternative MKA-21 or MKA-32 plates. It requires a flat bow surface for a proper through-hull flush mount installation.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the MKA-23 bracket with the newer Minn Kota Ultrex trolling motor series?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the MKA-23 is not directly compatible with the Minn Kota Ultrex or Ultrex QUEST series trolling motors. The Ultrex utilizes a significantly larger, wider cast-aluminum foot footprint and an integrated cable-routing layout that requires a wider structural base plate to handle its specialized weight distribution. For an Ultrex or Ultrex QUEST motor, you must utilize the larger, heavy-duty **Minn Kota MKA-52 QUEST \/ Ultrex Quick Release Bracket**, which is engineered specifically with the widened bolt patterns and torque ratings required for those advanced hybrid cable-steer models.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes this bracket allow the trolling motor to slide forward or backward to clear the bow roller on a trailer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MKA-23 is designed as a strict drop-and-lock quick-release tracking system rather than an adjustable sliding positioning bracket. When the locking handle is inserted, the motor is secured in a single, set position on the bow deck. However, when you are trailering your boat and need to clear the front bow roller or winch stand to prevent the motor lower unit from striking the trailer frame, you can simply pull the locking pin, slide the entire motor backward along the aluminum tracks by a few inches, and re-insert the pin through an alternative slot to temporarily hold the motor retracted safely inside the deck line.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the best way to mount this bracket if I cannot reach the bolts underneath my deck?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSecuring a high-torque motor via the MKA-23 requires a true through-hull installation using backing washers and nuts to prevent the bolts from pulling through the fiberglass deck under load. If your boat bow is completely sealed and you have no physical under-deck access ports, you should not rely on standard woodscrews, as they will quickly strip out of the fiberglass. Instead, you must install a waterproof marine access plate\/hatch nearby to gain hand access underneath, or utilize premium stainless steel blind marine toggle fasteners (such as Togglers or rubber well nuts) that expand tightly behind the fiberglass skin when tightened from above.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill the black anodized coating chip or peel off after exposure to hot sun and wet weather?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the black finish on the MKA-23 is not a painted layer or a powder-coat film; it is a factory hard-anodized surface treatment. Anodizing is an electrochemical process that integrates the protective oxide layer directly into the aluminum substrate itself. This means it will never peel, flake, bubble, or chip off like standard paints, even when subjected to intense midday heat, continuous moisture, and friction from sliding the plates together. To keep the finish looking pristine, simply wash away any dried lake scum or mud with standard marine soap and fresh water.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I lock this quick-release mount system to prevent someone from stealing my motor at a hotel parking lot?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. Theft prevention is one of the core design goals of the MKA-23 QRB Mount System. The main steel locking handle contains a built-in circular clearance hole positioned at its terminal edge. Once the handle is pushed completely down into the locked tracking channel, this clearance hole lines up perfectly with a matching slot on the bracket frame. You can loop the shackle of a standard short-shank marine padlock (up to 1\/4 inch shackle diameter) directly through this hole, making it physically impossible to slide the handle out or remove the trolling motor without a key or bolt cutters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48047254241571,"sku":"PV003082","price":156.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV3082_2.jpg?v=1713384461"},{"product_id":"aluminum-quick-release-bracket-minn-kota-1854036","title":"Minn Kota | Quick Release Bracket | Aluminum Mounting Bracket | 1854036","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Quick Release Bracket | Aluminum Mounting Bracket | 1854036\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Quick Release Bracket | Aluminum Mounting Bracket | 1854036\u003c\/strong\u003e is a professional-grade, high-strength marine mounting system engineered to provide a clean, secure, and fast-acting release mechanism for bow-mount trolling motors. Operating via a precision-machined interlocking two-piece sliding plate configuration, this heavy-duty bracket allows anglers to slide their trolling motor onto or off the boat deck in less than ten seconds without using a single tool. For boat owners concerned with high-value marine theft, being able to detach an expensive trolling motor and lock it safely inside a secure truck cabin or home garage provides unmatched peace of mind. Conversely, removing the motor completely clears the front gunwale, opening up valuable deck space on your bow casting platform. This transformation makes the boat highly versatile, switching from a hardcore fishing vessel into an open, safe deck area optimized for family cruising, recreational watersports, or fly fishing where loose lines can easily snag on bow hardware.\u003c\/p\u003e\n\n\u003cp\u003eConstructed entirely from premium, high-tensile extruded aluminum, the 1854036 bracket is meticulously engineered to withstand intense mechanical stress, heavy wave pounding, and the extreme twisting forces generated by high-output motors. Unlike plastic alternative plates, this structural aluminum arm resists twisting, flexing, and rattling, ensuring a rock-solid, factory-stable foundation under full-throttle acceleration. The kit features a side-loading design secured by a solid, heavy-gauge stainless steel locking pin assembly that pins the plates together tightly to eliminate lateral play. The package comes completely equipped for immediate through-hull deck installation, containing the upper motor-mounted bracket plate, the lower deck-mounted base channel plate, the heavy-duty steel locking pin with its matching hair-pin clip, an integrated transport fabric security strap, and a full set of premium marine-grade stainless steel nuts, bolts, and oversized washers designed to resist rust and galvanic oxidation in humid bilge environments.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstant Tool-Free Sliding Release:\u003c\/strong\u003e Precision-machined interlocking sliding tracks allow boaters to slide their trolling motor off the bow deck in seconds by simply removing a heavy-duty locking pin.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Tensile Extruded Aluminum Build:\u003c\/strong\u003e Crafted from structural-grade marine aluminum that delivers superior rigidity and zero flex, easily absorbing the high torque loads of modern high-thrust motors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdvanced Anti-Rattle Structural Fitment:\u003c\/strong\u003e Engineered with exceptionally tight tolerances across the interlocking slide channels to dampen motor vibration and torque noise, maintaining silent stealth on shallow flats.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePadlock-Compatible Theft Prevention:\u003c\/strong\u003e The heavy-duty stainless steel locking pin features a built-in clearance hole designed to accept a standard short-shank padlock, locking the motor permanently to the boat deck.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComprehensive Highway Transport Strap:\u003c\/strong\u003e Includes an integrated, heavy-duty fabric hold-down strap designed to wrap around the stowed motor arm, neutralizing jarring shocks during high-speed trailering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Through-Hull Fastener Set:\u003c\/strong\u003e Ships fully loaded with premium marine-grade stainless steel bolts, nylon-locking nuts, and large backing washers needed to facilitate a clean through-hull mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota 1854036 Aluminum Quick Release Bracket features a specialized structural layout tailored specifically to match electric-steer, electronic-deploy freshwater trolling motors. The pre-drilled hole configurations on the upper plate line up perfectly with the factory base bolt patterns of the **Minn Kota Terrova**, **Minn Kota Ulterra**, and **Minn Kota PowerDrive** series motors. It is also backward-compatible with legacy Minn Kota AutoPilot and Maxxum\/PD electric-steer models.\u003c\/p\u003e\n\n\u003cp\u003eThanks to its reinforced, solid-aluminum construction, the 1854036 plate is safety-rated and fully approved to support standard 12-volt, 24-volt, and 36-volt motor configurations up to **80 pounds of thrust or less, with standard shaft lengths measuring 60 inches or shorter**. It is **not recommended** for massive high-output 112lb thrust systems or extended 72-inch shafts, which exert extreme leverage forces that require the widened structural footprints of the heavy-duty MKA-53 or MKA-64 aluminum plates. This bracket requires a flat bow surface for proper flush installation.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the main difference between this aluminum 1854036 bracket and the composite MKA-21 bracket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe primary difference comes down to material construction, structural rigidity, and overall profile strength under torque load. The MKA-21 bracket is molded from a high-yield composite plastic polymer matrix, making it lightweight and completely rustproof, whereas the 1854036 bracket is machined from solid extruded aluminum. The aluminum build of the 1854036 offers superior rigidity with zero structural flex, making it highly preferred for anglers who frequently run their boats through heavy open-water chop or high-torque situations. While the composite bracket handles standard uses perfectly, the aluminum model provides an absolutely rock-solid mechanical connection that will never warp or distort over years of hard heavy-duty use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need to have under-deck access to install the lower base plate to my boat bow safely?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, having physical access to the underside of your bow deck is highly ideal and recommended. To safely handle the high-torque acceleration and sudden rotational forces generated by a trolling motor, the lower base channel plate must be secured through the hull using the provided stainless steel bolts, large backing washers, and nylon-locking nuts to prevent the hardware from tearing through the fiberglass. If your bow deck is completely sealed with foam or lacks internal access ports, you will need to install a marine inspection hatch to reach underneath, or utilize specialized heavy-duty marine blind toggle fasteners (such as well nuts or toggle bolts) rated specifically to anchor equipment from the top down.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I buy an extra base puck or channel separately to use one trolling motor on two different boats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. One of the best advantages of the Minn Kota quick release system is its modular flexibility. While Minn Kota does not always sell the aluminum lower base plate as a standalone retail item, the hole patterns match standard configurations, allowing you to install a base plate on your primary fishing boat and a second plate on a family pontoon or aluminum utility skiff. This allows you to shift your single, high-end Terrova or Ulterra trolling motor between both vessels in seconds, maximizing your electronics investment across your entire fleet without purchasing a second expensive motor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat size padlock should I buy to utilize the built-in security locking feature?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo secure the 1854036 bracket against theft, you should look for a high-quality marine-grade padlock featuring a short-shank configuration with a maximum shackle diameter of 1\/4 inch. A lock constructed from solid brass, stainless steel, or boron-alloy is highly recommended to prevent the internal tumbler mechanism from freezing up due to constant exposure to moisture and rain. Avoid long-shackle padlocks, as the excess loop space will allow the lock to bounce around and slap against your fiberglass deck while running on plane, which can chip your gelcoat finish and create annoying noise.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow should I maintain the aluminum slide channels to prevent them from binding over time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the 1854036 utilizes precision-machined aluminum-on-aluminum sliding tracks, keeping the channels free of abrasive grit is the best way to ensure smooth operation. Periodically rinse the bracket with fresh water to clear away any accumulated lake sand, mud, dried salt crystals, or pond weeds. To keep the plates sliding effortlessly, apply a thin layer of marine-grade silicone spray or dry Teflon lubricant along the tracks each season. Avoid using heavy automotive greases, as they will trap dirt and debris, creating an abrasive grinding paste that wears down the anodized finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48047286681891,"sku":"PV745054","price":102.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV745054_6.jpg?v=1713387681"},{"product_id":"minn-kota-mkp-2-power-prop-1865002","title":"Minn Kota | Power Prop | Trolling Motor Propeller | MKP-2 | 1865002","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Power Prop | Trolling Motor Propeller | MKP-2 | 1865002\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Power Prop | Trolling Motor Propeller | MKP-2 | 1865002\u003c\/strong\u003e is a high-efficiency, tournament-grade marine propulsion component engineered to maximize the raw pushing power, structural acceleration, and battery runtime of your small-to-midsize Minn Kota trolling motor. Operating as an authentic original equipment manufacturer (OEM) part, this 2-blade propeller features an aggressive, high-torque blade geometry designed specifically to move light-to-medium boat hulls through windy shorelines, light river currents, and choppy lake flats. Over multiple seasons of active angling, an original prop can easily become nicked by submerged rocks, scarred by gravel beds, or warped by tightly wrapped lines. These minor cosmetic imperfections create substantial underwater drag and structural imbalances, causing your trolling motor to vibrate loudly, drain your deep-cycle batteries prematurely, and lose critical top-end thrust. The MKP-2 restores your lower unit back to factory-fresh efficiency.\u003c\/p\u003e\n\n\u003cp\u003eMolded entirely from Minn Kota's proprietary, glass-reinforced composite polymer matrix, the Power Prop features an exceptional strength-to-weight ratio. The material is chemically balanced to remain completely rigid under full-throttle acceleration, eliminating blade flex to translate every ounce of rotational battery energy straight into forward or reverse movement. A major design highlight of the MKP-2 is its sweeping blade profile, which is highly optimized for slicing cleanly through freshwater vegetation, hydrilla, milfoil, and heavy lily pads without wrapping or stalling out the motor. The comprehensive replacement kit arrives fully loaded from the factory and completely ready for a rapid prop swap, containing the standalone black 2-blade propeller, an authentic steel prop pin (shear pin), a heavy-duty brass prop nut, and a premium flat washer.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Torque 2-Blade Design:\u003c\/strong\u003e Engineered with a wide, aggressive blade geometry that maximizes raw pushing power and open-water acceleration for small-to-midsize fishing boat configurations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlass-Reinforced Composite Build:\u003c\/strong\u003e Molded from an advanced, high-density polymer matrix that resists impact chipping, structural warping under heavy load, and UV weathering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeed-Slicing Optimization:\u003c\/strong\u003e Swept-back blade edges are custom-angled to cleanly cut through thick hydrilla, lily pads, and heavy freshwater vegetation without wrapping or stalling the motor armature.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Hardware Kit Included:\u003c\/strong\u003e Arrives fully loaded from the factory with a replacement steel shear pin, a heavy-duty brass prop nut, and a custom flat backing washer for a tool-free hardware refresh.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximizes On-Water Battery Lifespan:\u003c\/strong\u003e Precision-balanced to fully eliminate lower-unit wobbling and excessive mechanical drag, drastically reducing the amp draw on your deep-cycle batteries to extend runtime.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAuthentic OEM Part Matching:\u003c\/strong\u003e Certified as an original Minn Kota manufacturer accessory, guaranteeing an absolute, perfect physical seat onto your trolling motor's armature shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota Power Prop MKP-2 (part number 1865002 \/ factory SKU 1378121) features a highly specific compatibility layout centered around the diameter of your trolling motor's lower unit torpedo housing. It is engineered explicitly to fit Minn Kota motors utilizing a smaller \u003cstrong\u003e3-1\/4 inch motor diameter hub\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThis includes extensive compatibility with specific power brackets across the modern and legacy **Minn Kota Endura, Endura C2, Endura Max, Edge, Traxxis, PowerDrive, and PowerDrive V2** series motors that carry a **30lb, 36lb, 40lb, 45lb, or 50lb thrust rating**. It is critical to note that the MKP-2 **will not fit** mid-range 55lb to 70lb motors (which use a 3-5\/8 inch hub, like the MKP-37) and it **is completely incompatible** with heavy-duty 80lb or 112lb motors (which utilize a larger 4-inch hub, like the MKP-33 or MKP-38). Always verify your specific motor's thrust rating and hub diameter before completing a replacement order. It is completely rated for use in both freshwater and saltwater motor lines.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the small steel pin included in the prop kit, and how do I replace it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe small steel pin is called a shear pin, and it serves as a critical mechanical safety fuse designed to protect your trolling motor's internal armature shaft from catastrophic structural damage. When you are running your motor and the spinning prop violently strikes a solid underwater hazard—such as a large rock, concrete boat ramp, or a heavy submerged log—the shear pin is engineered to snap in half intentionally. This break decouples the prop from the engine, preventing the high-impact shock from bending the main steel drive shaft or shattering the internal magnets. To replace it, simply slide the old broken pieces out of the hole in the shaft, slide the new pin in horizontally, and align the groove on the back of the MKP-2 prop directly over the pin.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow tightly should I screw down the brass prop nut when installing the MKP-2?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen fastening the heavy-duty brass prop nut onto the threaded end of your trolling motor shaft, it is vital to tighten it down securely without crushing the components. Using a standard 1\/2-inch wrench or a specialized Minn Kota prop wrench tool, tighten the nut clockwise until it makes firm physical contact with the flat washer and the propeller hub, then give it an additional 1\/4 to 1\/2 turn to lock it in place. Never use a high-powered electric impact driver to tighten the prop nut, as excessive mechanical torque can easily strip the brass threads, snap the armature tip, or crack the composite plastic hub of your brand new propeller.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the performance difference between this 2-blade Power Prop and a 3-blade Weedless Wedge prop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe choice between a 2-blade Power Prop (MKP-2) and a 3-blade Weedless Wedge prop comes down to your primary operating environments and speed tactics. A 2-blade Power Prop features wider, more aggressive individual blades that capture a larger volume of water, making it superior for achieving maximum top-end speed, accelerating quickly, and pushing heavy boat hulls against strong river currents or high wind drift lines. A 3-blade Weedless Wedge prop focuses its geometry on extreme weed evasion, using swept-back curved blades to push away thick vegetation without wrapping, but it sacrifices a slight amount of raw top-end forward thrust to achieve that stealth.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy is my trolling motor vibrating loudly after installing this new replacement prop?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your trolling motor exhibits a loud humming noise or heavy physical vibration after installing the MKP-2, it is typically caused by one of two installation alignment issues. First, check to ensure that the internal steel shear pin is sitting perfectly centered inside its shaft slot and has not slid slightly to one side, which will cause the propeller to seat crookedly. Second, inspect the prop shaft itself for any tangled loops of braided fishing line wrapped behind the prop. A buildup of compressed fishing line can push the prop forward out of balance and can quickly destroy the lower unit's rubber oil seals, allowing water to leak into the electric motor compartment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I safely use this black replacement propeller on a white Minn Kota Riptide saltwater motor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. From a purely structural, mechanical, and physical standpoint, the MKP-2 Power Prop is fully compatible with white Minn Kota Riptide saltwater trolling motor models, provided the Riptide motor carries a matching thrust rating between 30lb and 50lb with a 3-1\/4 inch hub diameter. Minn Kota’s composite props are completely inert and non-metallic, meaning they contain no components that can rust, pit, or suffer from galvanic corrosion in high-salinity coastal bays. The only difference is cosmetic—installing this black prop onto a white Riptide lower unit will create a black-and-white contrast layout, but it will deliver the exact same high-thrust performance on the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48047325839651,"sku":"PV004046","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV4046_7.jpg?v=1713384540"},{"product_id":"minn-kota-mka-7-extension-handle-30-1854100","title":"Minn Kota | Trolling Motor Extension Handle | 30\" | MKA-7 | 1854100","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Trolling Motor Extension Handle | 30\" | MKA-7 | 1854100\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Trolling Motor Extension Handle | 30\" | MKA-7 | 1854100\u003c\/strong\u003e is an industrial-grade, fixed-length marine steering accessory engineered to maximize the ergonomics, comfort, and physical leverage of hand-control transom-mount and bow-mount trolling motors. For anglers operating small aluminum fishing boats, jon boats, dinghies, square-back canoes, or utility skiffs, sitting or standing directly adjacent to the motor tiller handle can be incredibly uncomfortable, often forcing you into an awkward twisting posture that causes severe lower back and wrist strain over long periods. The MKA-7 solves this operational challenge completely by serving as a rigid, 30-inch structural extension shaft that clamps directly onto your motor's factory twist-grip. This extension brings speed and steering tracking controls closer to your preferred seating layout, allowing you to fish comfortably from a mid-ship bench or a raised pedestal chair.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from lightweight, high-tensile structural aluminum, this premium extension handle delivers absolute mechanical rigidity with zero bending or twisting play, ensuring crisp, immediate response when steering. The system incorporates an inline split-clamp locking collar lined with high-friction internal padding, providing an absolute structural hold that prevents the handle from slipping or backing out under load. The handle is equipped with an oversized, non-slip rubberized twist grip that matches standard multi-speed mechanical transmissions perfectly. This ensures that you can shift through forward and reverse speed settings smoothly and accurately, even with wet hands, slime-coated gloves, or during heavy downpours. By relocating the steering axis forward, the captain can operate the vessel from a balanced mid-ship position, significantly improving hull planing, weight distribution, and tracking line performance.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended 30-Inch Fixed Reach:\u003c\/strong\u003e Provides 30 inches of added structural length to your trolling motor tiller, enabling comfortable operation from a forward bench or raised pedestal chair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Tensile Aluminum Tube Construction:\u003c\/strong\u003e Built from premium marine-grade aluminum that balances a lightweight profile with extreme structural rigidity, preventing bending under high-torque steering loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOversized Non-Slip Rubber Grip:\u003c\/strong\u003e Outfitted with an ergonomic, textured rubber twist grip that ensures an absolute mechanical hold for precise speed adjustments in wet, stormy weather.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSplit-Clamp Secure Locking Collar:\u003c\/strong\u003e Designed with a dual-bolt split clamping mechanism lined with high-friction padding that tightly locks onto your motor’s original tiller handle, preventing slippage or backing out.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimizes Boat Weight Distribution:\u003c\/strong\u003e Enables the operator to sit or stand much further forward in the boat, leveling out the hull to lower drag, achieve a smooth plane, and increase speed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRustproof Corrosion-Resistant Assembly:\u003c\/strong\u003e Constructed entirely from synthetic polymer blocks and anodized marine-grade aluminum, making it completely safe for continuous freshwater and saltwater use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-7 Transom Motor Extension Handle features a wide, highly functional universal compatibility matrix. It is custom-engineered to clamp directly onto the factory twist-grip tiller handles of **all Minn Kota hand-control transom-mount and bow-mount trolling motors**. This includes popular lines such as the Minn Kota Endura, Endura C2, Endura Max, Traxxis, Maxxum, Edge, and Riptide hand-steer models.\u003c\/p\u003e\n\n\u003cp\u003eBeyond native Minn Kota models, the flexible split-clamp locking collar features an adjustable internal diameter designed to clamp securely onto standard hand-control trolling motor handles from major competitive brands, including MotorGuide, Newport Vessels, and Watersnake, provided the factory handle diameter measures between 1-1\/8 inches and 1-1\/2 inches. This extension is fully approved and rated for use in both freshwater lakes and harsh, high-salinity coastal saltwater bays, as it contains zero ferrous metallic components that could rust or suffer from galvanic breakdown.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill using this extension handle allow me to shift my motor into reverse if it has a click-indexing handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. The internal split-clamp mechanism of the MKA-7 is engineered to compress completely and tightly around your motor's original twist-grip handle. This tight friction lock ensures that any rotational force you apply to the oversized non-slip rubber grip is translated directly down the shaft to the motor’s internal speed switch block. Whether your trolling motor features a standard 5-speed click-indexed mechanical transmission (with 5 forward and 3 reverse settings) or a modern infinitely variable digital speed system, the extension handle turns smoothly and precisely, allowing you to select forward, reverse, and off positions without any slippage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow does using an extension handle help improve my boat's tracking performance and speed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsing the Minn Kota MKA-7 extension handle provides a massive advantage for small watercraft by dramatically improving your boat's weight distribution and center of gravity. When an angler is forced to sit on the absolute rear bench seat next to a transom motor, the stern sinks deep into the water while the bow rises awkwardly into the air. This \"plowing\" stance creates high water resistance, lowers your maximum speed, and causes the boat to blow off track in crosswinds. Extending the handle lets you sit on a forward bench seat, leveling the hull out flat on the water to achieve a smooth plane, faster tracking speeds, and tighter tracking lines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use this extension handle on a high-horsepower outboard gas engine tiller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, Minn Kota strictly designs and rates the MKA-7 Extension Handle for use on electric marine trolling motors only; it is **completely unapproved and unsafe** to use on gas-powered outboard engines. Gas outboards generate immense rotational steering torque, severe vibration patterns, and require high physical force to maneuver, especially at higher speeds. The composite split-clamp collar and lightweight aluminum tubing of the MKA-7 are not structurally rated to handle the extreme mechanical stresses of a combustion engine lower unit, and attempting to use it on a gas outboard can result in mechanical failure, loss of steering control, and severe safety hazards.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the 30-inch length adjustable, or is it a single solid fixed bar?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Minn Kota MKA-7 is a dedicated fixed-length extension handle measuring exactly 30 inches from the clamping collar base to the tip of the rubber grip, and it does not feature any telescoping internal joints or length adjustments. This solid, single-tube design is highly intentional because removing telescoping sleeves eliminates all potential points of mechanical play, sliding slippage, and structural wear over time. This makes the MKA-7 exceptionally rigid and durable, which is highly preferred by commercial guides and heavy-duty utility boat operators who value absolute structural strength over adjustable lengths.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat maintenance should I perform to prevent the aluminum shaft from binding or locking up?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the MKA-7 utilizes premium anodized aluminum and marine-grade composites to ensure maximum resistance against corrosion, basic seasonal maintenance will keep the assembly operating smoothly. After fishing in muddy lakes, weedy marshes, or high-salinity saltwater bays, always rinse the extension handle thoroughly with clean fresh water to wash away dried salt crystals, sand, and organic pond scum. Periodically loosen the split-clamp collar completely, wipe down the overlapping section with a dry cloth, and check that the fasteners remain tight to ensure complete structural protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48057292226851,"sku":"PV004309","price":59.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV4309_3.jpg?v=1713384559"},{"product_id":"minn-kota-mka-18-extension-handle-18-1854101","title":"Minn Kota | Trolling Motor Handle | 18\" Extension Handle | MKA-18 | 1854101","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Trolling Motor Handle | 18\" Extension Handle | MKA-18 | 1854101\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Trolling Motor Handle | 18\" Extension Handle | MKA-18 | 1854101\u003c\/strong\u003e is a highly durable, precision-machined marine steering accessory designed to provide essential ergonomic extension and enhanced physical leverage for hand-control trolling motors. For anglers operating compact watercraft—such as aluminum jon boats, small flat-bottom skiffs, tenders, and fishing kayaks—the standard factory tiller handles built onto trolling motors are notoriously short. This short profile forces the operator to lean uncomfortably rearward or twist their body sideways to steer, creating severe wrist, neck, and lower back fatigue during long tracking runs. The Minn Kota MKA-18 solves this layout challenge completely by working as a rigid 18-inch fixed structural extension that clamps securely onto your motor's factory twist-grip, shifting the steering and throttle controls forward into a natural, easy-to-reach position.\u003c\/p\u003e\n\n\u003cp\u003eCNC-machined from high-grade, lightweight structural aluminum, this 18-inch extension bar delivers absolute mechanical rigidity with zero structural bending or flex, ensuring that your manual steering inputs are translated instantly to the motor lower unit. The handle comes equipped with an oversized, texturized non-slip rubber grip that provides exceptional hand traction for twisting through speed settings, even during heavy downpours or when handling slick baitfish. The input collar features a split-clamp locking design lined with internal high-friction padding, compressing tightly over your motor's original handle via dual marine-grade fasteners to prevent any sliding, rotating, or backing out under full throttle loads. By implementing this factory accessory, captains improve their boat's weight balance, flattening the hull on the water to maximize speed and tracking line efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e18-Inch Fixed Extension Reach:\u003c\/strong\u003e Adds a precise 18 inches of structural length to your trolling motor tiller handle, delivering a more comfortable, ergonomic cockpit reach.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThick-Walled Structural Aluminum Core:\u003c\/strong\u003e Built from premium marine-grade aluminum that balances an ultra-lightweight profile with extreme structural rigidity, preventing shaft flex.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOversized High-Grip Twist Tiller:\u003c\/strong\u003e Equipped with a thick, textured rubber grip that maximizes hand traction for smooth, accurate multi-speed throttle adjustments in wet weather.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Bolt Split Clamping Block:\u003c\/strong\u003e High-security mounting collar clamps down tightly over your motor's original handle, utilizing internal high-friction padding to completely eliminate slippage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimizes Boat Weight Balance:\u003c\/strong\u003e Allows the operator to sit slightly further forward in small watercraft, leveling out the hull to lower drag and improve tracking straightness.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100% Saltwater-Proof Construction:\u003c\/strong\u003e Crafted using advanced synthetic polymers and heavily anodized aluminum strands, making it completely immune to rust, pitting, and salt air corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKA-18 Extension Handle features universal compatibility with all manual-steer hand-control marine networks. It is custom-machined to clamp directly onto the factory twist-grip tiller handles of **all Minn Kota hand-control transom-mount and bow-mount trolling motors**, spanning lines like the Endura, Endura C2, Endura Max, Traxxis, Maxxum, Edge, and Riptide hand-control models.\u003c\/p\u003e\n\n\u003cp\u003eAdditionally, the adjustable split-clamp mounting collar features a flexible internal throat designed to accommodate standard hand-control trolling motor handles from major competitive brands, including MotorGuide, Newport Vessels, and Watersnake, provided the factory handle outer diameter measures between 1-1\/8 inches and 1-1\/2 inches. This handle extension is fully rated and approved for use in both freshwater and high-salinity coastal saltwater environments, containing no metallic components that could rust or experience galvanic breakdown over years of hard use.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill this 18-inch extension handle work smoothly with a trolling motor that has click-indexed speed settings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. The internal split-clamp mechanism of the MKA-18 is engineered to compress completely and tightly around your motor's original twist-grip handle. This tight friction lock ensures that any rotational force you apply to the oversized non-slip rubber grip is translated directly down the shaft to the motor’s internal speed switch block. Whether your trolling motor features a standard 5-speed click-indexed mechanical transmission (with 5 forward and 3 reverse settings) or a modern infinitely variable digital speed system, the extension handle turns smoothly and precisely, allowing you to select forward, reverse, and off positions without any slippage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use this extension handle on a gas-powered outboard outboard motor tiller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the Minn Kota MKA-18 is designed, tested, and rated strictly for use on electric marine trolling motors only; it is **completely unapproved and unsafe** to use on gas outboard combustion engines. Gas outboards generate severe high-frequency engine vibration patterns and produce immense rotational steering torque that requires extreme force to control, especially at high idling speeds. The composite clamp assembly and aluminum tubing of the MKA-18 are not built to withstand these intense combustion stresses, and attempting to use it on a gas outboard can cause the clamp to fracture, leading to a sudden loss of steering control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the 18-inch length telescopic or can it be shortened if needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Minn Kota MKA-18 is a dedicated fixed-length extension handle measuring exactly 18 inches from the clamping collar base to the tip of the rubber grip, and it does not feature any telescoping internal joints or length adjustments. This solid, single-tube design is highly intentional because removing telescoping sleeves eliminates all potential points of mechanical play, sliding slippage, and structural wear over time. This makes the MKA-18 exceptionally rigid and durable, which is highly preferred by commercial guides and heavy-duty utility boat operators who value absolute structural strength over adjustable lengths.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat torque specification should be used when tightening the clamp bolts around my original handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installing the MKA-18 collar over your original trolling motor handle, use a standard handheld screwdriver or wrench to tighten the dual stainless steel clamp screws evenly until the collar tightly compresses the internal rubber padding flush against your factory grip. Tighten the hardware down firmly until the extension shaft cannot be twisted or wiggled independently of the motor handle. Avoid using high-powered electric impact drivers, as excessive mechanical torque can easily strip the threads or crack the composite clamp housing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow do I clean and maintain the extension handle after fishing in brackish or saltwater environments?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure maximum service life and prevent salt crust from building up around the hardware, you should perform a quick freshwater rinse after each outing. Spray the entire line, rubber grip, aluminum tube, and clamp assembly thoroughly with clean fresh water to flush away trapped salt crystal accumulations, lake mud, and algae. Allow the handle to dry completely before long-term storage. This simple routine maintenance will keep the hard-anodized finish and internal friction pads working smoothly for multiple seasons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48057292161315,"sku":"PV004310","price":46.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV4310_3.jpg?v=1713384560"},{"product_id":"minn-kota-mkr-20-trolling-motor-plug-1865107","title":"Minn Kota | Trolling Motor Plug | Marine Power Plug Connector | MKR-20 | 1865107","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Trolling Motor Plug | Marine Power Plug Connector | MKR-20 | 1865107\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Trolling Motor Plug | Marine Power Plug Connector | MKR-20 | 1865107\u003c\/strong\u003e is an industrial-grade, heavy-duty electrical rigging accessory designed to establish a safe, low-resistance quick-disconnect power link for high-thrust marine trolling motors. Modern bow-mount and transom-mount trolling motors operate on demanding 12-volt, 24-volt, and 36-volt electrical grids that draw significant continuous current, which naturally generates substantial thermal energy along the power delivery lines. Attempting to connect heavy-gauge battery wires using standard wire nuts, basic electrical tape splices, or uninsulated terminal strips creates structural areas of extreme electrical resistance. This operational hazard can cause severe voltage drop, reduce your motor's maximum thrust output, melt wire insulation, or trigger catastrophic electrical shorts inside dark bow storage lockers. The Minn Kota MKR-20 solves these high-stakes rigging issues completely by providing a secure, weather-sealed inline matching connection that transfers electrical energy with absolute efficiency.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from high-impact, UV-stabilized composite polymer matrices, this premium plug connector kit includes both the male plug head and the corresponding female receptacle block. The internal design is equipped with oversized, high-purity silver-plated copper contacts that maximize electrical conductivity while minimizing amp draw friction. For boat owners who trailer their watercraft to public marinas or park at unmonitored hotel slips, being able to cleanly pull a spring-loaded quick-release ring and disconnect the power line allows you to smoothly remove your expensive trolling motor off its quick-release deck plate for secure storage indoors. The comprehensive retail package comes fully loaded from the factory and is ready for immediate heavy-gauge assembly, containing the male plug half, the female receptacle half, specialized heavy-wall dual-wall adhesive-lined heat shrink tubes, and industrial tinned copper crimp splice connectors designed to insulate the bare copper wire strands from damp bilge environments.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Amperage Continuous Current Load:\u003c\/strong\u003e Meticulously engineered to safely handle continuous DC electrical current flows up to 50 amps without overheating or melting the housing blocks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstant Tool-Free Disconnection:\u003c\/strong\u003e Outfitted with a spring-loaded, fast-acting quick-release sleeve ring that allows anglers to isolate and disconnect trolling motor power lines in less than three seconds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePremium Silver-Plated Copper Contacts:\u003c\/strong\u003e Utilizes high-purity silver-coated internal copper elements that maximize electrical sensitivity and eliminate voltage drop along the main power line.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive-Lined Marine Heat Shrink:\u003c\/strong\u003e Ships with premium, heavy-wall dual-wall heat shrink tubing that melts internally upon heating to form an absolute, watertight seal over raw wire joins.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-Gauge Wire Accommodations:\u003c\/strong\u003e Universal internal terminal sleeves are perfectly sized to accept and clean-fit 6 AWG and 8 AWG marine-grade copper power cables with zero modifications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpact-Resistant Composite Shells:\u003c\/strong\u003e Encased in an automotive-grade polymer matrix housing that completely resists mechanical shock, vibration cracking, and degradation from onboard oils and fuels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEncapsulated Moisture Sealing:\u003c\/strong\u003e Features internal rubber face gaskets and compression rings that seal out heavy open-deck splashing, morning dew, and dense salt air humidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKR-20 Marine Power Plug Connector features broad universal compatibility across the entire marine electronics market. It is engineered to pair perfectly with all generations of **Minn Kota trolling motors spanning the Ultrex, Ulterra, Terrova, Fortrex, Maxxum, Edge, PowerDrive, and Endura series**, regardless of their thrust rating. Because it utilizes a universal dual-conductor positive\/negative configuration, it is also fully compatible with third-party trolling motor brands and high-amp accessories, including MotorGuide, Newport Vessels, Garmin Force, and Lowrance Ghost motors.\u003c\/p\u003e\n\n\u003cp\u003eElectrically, this connector pack is fully rated and approved for any DC marine circuit ranging from **12 volts, 24 volts, to 36 volts, pulling up to a maximum threshold of 50 amps continuous current**. The internal splicing sleeves accept standard marine wiring configurations, matching seamlessly with 6 AWG or 8 AWG copper wire runs. It is explicitly designed for inline, free-floating deck layouts rather than flush-mounted panel installations, making it highly preferred for custom electronics boxes and open gunwale rigging. It is fully certified for both freshwater and saltwater use.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it necessary to use a professional crimping tool or soldering iron to secure my wires inside this plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, to establish a safe, low-resistance connection that can handle up to 50 amps of continuous power without overheating, you must use a heavy-duty mechanical wire crimping tool to secure your 6 AWG or 8 AWG copper wires inside the internal metal contact lugs. Splicing heavy-gauge marine wire should never be done by simply twisting strands together or using basic hand pliers, as loose connections will create high electrical resistance, melt the composite housing, and create serious fire hazards inside your boat hull. While soldering can be used as an alternative, a proper mechanical crimp using a dedicated terminal crimper provides the highest vibration resistance for marine applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this inline MKR-20 plug and a flush-mounted dashboard trolling motor plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe primary difference lies in the mounting execution and physical placement within your boat's layout. A flush-mounted dashboard plug (such as the premium MKR-26) is designed to be permanently bolted into a 1-1\/8 inch drilled hole through your fiberglass bow panel or aluminum console, providing a clean, hard-anchored wall socket. This inline MKR-20 plug is designed as a floating, unanchored connection loop that sits loosely on your boat deck, inside a forward storage locker, or directly within the battery compartment, making it highly preferred for utility skiffs, jon boats, or custom rigging where drilling into panels is undesirable.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this connector plug protect my trolling motor from power surges if a short circuit occurs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the Minn Kota MKR-20 functions strictly as a heavy-duty quick-connect mechanical plug and electrical pass-through; it does not contain any internal fuses, circuit boards, or thermal overload elements to protect your lines from power surges. To safeguard your expensive trolling motor and wiring harness from catastrophic short circuits or overcurrent spikes, you must install a dedicated manual-reset 50-amp or 60-amp marine circuit breaker (such as the MKR-27) on the positive (+) red wire line, placed as close to your primary battery terminal post as possible.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I leave this plug disconnected on my open boat deck during a heavy rain storm?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the MKR-20 is fully qualified to live on an open boat deck through severe weather, provided you utilize the included heavy-duty rubber weather caps. When you disconnect the male and female halves of the plug to remove your trolling motor, you must immediately slide the integrated rubber dust caps firmly over both open connector faces. These caps seal tightly against the outer rims of the composite shells, creating a watertight barrier that prevents rain, morning dew, and corrosive salt air from making contact with the internal silver-plated copper pins, preventing rust and oxidation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this connector pack support modern high-performance lithium (LiFePO4) marine batteries?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. The Minn Kota MKR-20 is fully compatible with all types of marine battery chemistries, including traditional flooded lead-acid cells, sealed maintenance-free blocks, Absorbed Glass Mat (AGM) cells, and high-performance Lithium Iron Phosphate (LiFePO4) marine batteries. The internal silver-plated copper connections focus entirely on transferring raw continuous current up to 50 amps with maximum efficiency, passing the steady voltage curves of modern lithium systems perfectly without causing any resistance imbalances or signal distortions along the main electrical line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48057543196963,"sku":"PV004043","price":53.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV4043_7.jpg?v=1713384540"},{"product_id":"minn-kota-mkr-12-quick-connector-plug-1865101","title":"Minn Kota | Quick Connector Plug | Trolling Motor Power Connector | MKR-12 | 1865101","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Quick Connector Plug | Trolling Motor Power Connector | MKR-12 | 1865101\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Quick Connector Plug | Trolling Motor Power Connector | MKR-12 | 1865101\u003c\/strong\u003e is a heavy-duty, high-amperage electrical rigging accessory engineered to provide a safe, reliable, and fast-acting quick-connect link for high-power trolling motor battery lines. Modern 12V, 24V, and 36V marine trolling motors draw significant continuous current, which generates substantial heat along the electrical wiring run. Traditional wire nuts, cheap electrical tape splices, or basic terminal blocks create areas of high electrical resistance that can cause major voltage drop, melt insulation, trip breakers prematurely, or even spark electrical fires inside dark hull compartments. The Minn Kota MKR-12 completely solves this structural hazard by introducing an industrial-grade, heavy-gauge inline plug-and-receptacle matching kit that handles constant high-current current flows safely and cleanly.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from rugged, impact-resistant composite housings, the MKR-12 features a heavy-duty dual-conductor layout equipped with oversized, low-resistance internal silver-plated copper contacts. This quick-connect kit is designed with a male plug half that attaches to your trolling motor's power leads, and a matching female receptacle half that wires directly to your boat's deep-cycle battery bank wiring harness. When you return to the boat ramp or park your vessel at a public marina slip, you can unclip the locking sleeve and disconnect the plug in seconds. This allows you to smoothly slide your expensive trolling motor off its quick-release deck plate for secure storage indoors, away from opportunistic thieves. The complete kit comes fully packed with the male plug, female receptacle, heavy-duty protective rubber weather caps to seal the contacts when disconnected, and premium compression terminal lugs.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Amp Continuous Current Rating:\u003c\/strong\u003e Engineered to safely handle continuous electrical flows up to 50 amps, making it an excellent fit for modern high-thrust 12V, 24V, and 36V trolling motor grids.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstant Tool-Free Disconnection:\u003c\/strong\u003e Features a fast-action, heavy-duty mechanical locking tab that enables anglers to disconnect their trolling motor power line in seconds for safe off-boat storage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePremium Silver-Plated Copper Contacts:\u003c\/strong\u003e Outfitted with high-purity, silver-coated internal copper connectors that maximize electrical conductivity while minimizing resistance and voltage drop.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Protective Rubber Weather Caps:\u003c\/strong\u003e Includes two tight-fitting rubber caps that slide over the open plug faces when disconnected, sealing out bilge water splash, salt air humidity, and dust.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-Gauge Wire Accommodations:\u003c\/strong\u003e Universal internal terminal ports are sized to clean-fit and secure heavy-duty 6 AWG or 8 AWG marine-grade copper power wires with zero modifications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpact-Resistant Composite Shells:\u003c\/strong\u003e Encased in a rugged, UV-stabilized polymer matrix that completely resists cracking, mechanical shock, and chemical degradation from oils and fuels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKR-12 Quick Connector Plug features a broad universal compatibility matrix across the entire marine e-commerce market. It is engineered to pair perfectly with all generations of **Minn Kota trolling motors spanning the Ultrex, Ulterra, Terrova, Fortrex, Maxxum, Edge, PowerDrive, and Endura series**, regardless of thrust output. Because it utilizes a universal dual-conductor design, it is also fully compatible with third-party trolling motor brands and electronic accessories like NOCO, Motorguide, Garmin Force, and Lowrance Ghost motors.\u003c\/p\u003e\n\n\u003cp\u003eElectrically, this connector is fully rated and approved for any DC marine circuit ranging from **12 volts, 24 volts, to 36 volts, pulling up to a maximum threshold of 50 amps continuous continuous current**. The internal splicing ports accept standard standard marine wiring configurations, matching seamlessly with 6 AWG or 8 AWG copper wire runs. It requires an inline connection layout along your bow or battery compartment bulkheads, providing an essential safety link that integrates smoothly alongside standard marine circuit breakers.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it necessary to use a crimping tool or soldering iron to secure my wires inside this plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, to establish a safe, low-resistance connection that can handle up to 50 amps of continuous power without overheating, you must use a heavy-duty mechanical wire crimping tool to secure your 6 AWG or 8 AWG copper wires inside the internal metal contact lugs. Splicing heavy-gauge marine wire should never be done by simply twisting strands together or using basic hand pliers, as loose connections will create high electrical resistance, melt the composite housing, and create serious fire hazards inside your boat hull. While soldering can be used as an alternative, a proper mechanical crimp using a dedicated terminal crimper provides the highest vibration resistance for marine applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this inline MKR-12 plug and a flush-mounted dashboard trolling motor plug?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe primary difference lies in the mounting execution and physical placement within your boat's layout. A flush-mounted dashboard plug (such as the premium MKR-26) is designed to be permanently bolted into a 1-1\/8 inch drilled hole through your fiberglass bow panel or aluminum console, providing a clean, hard-anchored wall socket. This inline MKR-12 plug is designed as a floating, unanchored connection loop that sits loosely on your boat deck, inside a forward storage locker, or directly within the battery compartment, making it highly preferred for utility skiffs, jon boats, or custom rigging where drilling into panels is undesirable.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this connector plug protect my trolling motor from power surges if a short circuit occurs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the Minn Kota MKR-12 functions strictly as a heavy-duty quick-connect mechanical plug and electrical pass-through; it does not contain any internal fuses, circuit boards, or thermal overload elements to protect your lines from power surges. To safeguard your expensive trolling motor and wiring harness from catastrophic short circuits or overcurrent spikes, you must install a dedicated manual-reset 50-amp or 60-amp marine circuit breaker (such as the MKR-27) on the positive (+) red wire line, placed as close to your primary battery terminal post as possible.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I leave this plug disconnected on my open boat deck during a heavy rain storm?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the MKR-12 is fully qualified to live on an open boat deck through severe weather, provided you utilize the included heavy-duty rubber weather caps. When you disconnect the male and female halves of the plug to remove your trolling motor, you must immediately slide the integrated rubber dust caps firmly over both open connector faces. These caps seal tightly against the outer rims of the composite shells, creating a watertight barrier that prevents rain, morning dew, and corrosive salt air from making contact with the internal silver-plated copper pins, preventing rust and oxidation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this connector pack support modern high-performance lithium (LiFePO4) marine batteries?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, absolutely. The Minn Kota MKR-12 is fully compatible with all types of marine battery chemistries, including traditional flooded lead-acid cells, sealed maintenance-free blocks, Absorbed Glass Mat (AGM) cells, and high-performance Lithium Iron Phosphate (LiFePO4) marine batteries. The internal silver-plated copper connections focus entirely on transferring raw continuous current up to 50 amps with maximum efficiency, passing the steady voltage curves of modern lithium systems perfectly without causing any resistance imbalances or signal distortions along the main electrical line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48057859735843,"sku":"PV004042","price":19.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV4042_7.jpg?v=1713384539"},{"product_id":"minn-kota-mkr-15-transducer-mounting-kit-1840201","title":"Minn Kota | Transducer Mounting Kit | Sonar Mount Accessory | MKR-15 | 1840201","description":"\u003cp\u003e\u003cb\u003eMinn Kota | Transducer Mounting Kit | Sonar Mount Accessory | MKR-15 | 1840201\u003c\/b\u003e\u003c\/p\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMinn Kota | Transducer Mounting Kit | Sonar Mount Accessory | MKR-15 | 1840201\u003c\/strong\u003e is a commercial-grade marine hardware assembly engineered to provide a rock-solid, permanent structural mounting path for external fishfinder transducers directly onto the lower torpedo housing of your trolling motor. Many traditional or older trolling motor lower units lack integrated sonar elements, forcing anglers to route a secondary transom-style or bow-style transducer down the motor shaft. However, simply using plastic zip ties or cheap hose clamps to secure sensitive sonar equipment is an operational hazard; they can stretch, slip, or snap, leaving your expensive transducer dragging on the lake bottom or catching inside the deploying bracket tracks. The Minn Kota MKR-15 completely eliminates these layout complications by providing a ruggedized, vibration-dampening bracket interface that locks your sonar array tightly into position at the very nose of your underwater motor.\u003c\/p\u003e\n\n\u003cp\u003eConstructed entirely from premium, marine-grade stainless steel and impact-resistant composite alloys, this structural mounting kit is meticulously engineered to withstand constant water friction, high hydrostatic force, and direct impacts from submerged timber, rocks, and thick shoreline vegetation. The low-profile profile minimizes drag, ensuring that water flows cleanly across your transducer faceplate to deliver clear, uncorrupted on-screen target separation and depth imagery. The comprehensive kit comes completely loaded from the factory and is fully equipped for immediate installation out of the box, containing a heavy-duty marine stainless steel strap clamp, an impact-absorbing composite transducer cradle adapter, a locking washer array, and high-tensile fasteners. By implementing this authentic OEM hardware kit, anglers protect their sonar investments and establish an ultra-secure, rattle-free baseline optimal for high-fidelity 2D and down-scanning tactics.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRock-Solid Trolling Motor Integration:\u003c\/strong\u003e Permanently mounts any standard external transom-style fishfinder transducer directly onto your bow-mount or transom-mount trolling motor lower hub for optimal nose-cone visibility.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine-Grade Stainless Steel Build:\u003c\/strong\u003e Outfitted with an industrial-strength stainless steel strap clamp that resists rust, salt air pitting, and structural fatigue in harsh marine conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpact-Absorbing Composite Cradle:\u003c\/strong\u003e Includes a premium, non-flexing polymer cradle block that positions the transducer at a perfect parallel angle while dampening lower unit engine vibrations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-Profile Hydrodynamic Profile:\u003c\/strong\u003e Specifically engineered to minimize water turbulence and drag, preventing the accumulation of grass and weeds around the lower unit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtects Delicate Electronics Cables:\u003c\/strong\u003e Establishes a rigid, stabilized baseline that prevents the transducer from shifting, protecting internal sensor wiring from snapping or pinching under load.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComprehensive DIY Installation Kit:\u003c\/strong\u003e Arrives fully equipped from the factory with the strap, cradle, structural backing shims, and all necessary marine stainless steel nuts and washers for a fast setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility Information\u003c\/h3\u003e\n\u003cp\u003eThe Minn Kota MKR-15 Transducer Mounting Kit features an exceptionally wide, universal compatibility matrix. On the trolling motor side, the included heavy-duty adjustable stainless steel strap clamp is sized to fit perfectly around all standard Minn Kota lower unit torpedo housings utilizing a \u003cstrong\u003e3-1\/4 inch or 3-5\/8 inch motor diameter hub\u003c\/strong\u003e. This includes extensive coverage across the modern and legacy Minn Kota Endura, Endura C2, Endura Max, Edge, PowerDrive, PowerDrive V2, Terrova, Maxxum, and Traxxis series motors pulling between 30 and 70 pounds of thrust.\u003c\/p\u003e\n\n\u003cp\u003eOn the electronics side, the universal composite cradle is pre-drilled and slotted to accept standard external transom-mount transducers from all major marine sonar brands, including Humminbird, Lowrance, Garmin, and Eagle (such as standard dual-beam 2D skimmer blocks and compact down-imaging arrays). Please note that this kit **is not compatible with large 4-inch motor hubs** typical of heavy-duty 80lb or 112lb thrust motors (which require the larger MKR-15 variant or specialized clamps). It is fully approved for both freshwater lakes and high-salinity saltwater bay environments.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill the stainless steel strap clamp scratch or slice through my trolling motor lower unit's protective paint finish?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heavy-duty stainless steel strap included with the MKR-15 kit features micro-polished, rounded edges to prevent it from gouging or slicing into your trolling motor's lower torpedo housing. However, because the clamp must be torqued down tightly to prevent the transducer from shifting while running at high speeds, metal-on-metal friction can cause minor surface scuffing over time. To preserve your motor's factory paint and provide a superior friction lock, many professional riggers wrap a single layer of electrical tape or thin marine rubber tape around the lower hub before tightening the clamp over it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use this kit to mount a large, modern high-definition side-imaging or live-sonar transducer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the MKR-15 is engineered specifically for traditional, compact 2D dual-beam skimmer transducers and smaller, down-imaging blocks. Modern mega-high-frequency scanning arrays—such as Humminbird MEGA Side Imaging, Lowrance ActiveImaging, or Garmin LiveScope\/ActiveCaptain transducers—are significantly longer, wider, and heavier than standard skimmers. These large arrays exert excessive hydrodynamic leverage and require larger, specialized bracket frames or shaft-mounted mechanical clamps to prevent the transducer faceplate from shifting or snapping under load.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow tightly should I screw down the stainless steel clamp to ensure it doesn't slip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen fastening the MKR-15 strap clamp around your trolling motor hub, use a standard flathead screwdriver or socket driver to tighten the tension screw clockwise until the clamp is completely flush and the composite cradle cannot be twisted or wiggled by hand. Be careful not to overtighten the strap with excessive force or high-powered impact wrenches, as applying too much torque can strip the mechanical worm gears inside the clamp collar, warp the composite cradle block, or warp the lower unit's outer aluminum casing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this transducer mount safe to leave on my motor if I fish in thick, heavy hydrilla and lily pads?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the MKR-15 features a highly streamlined, tapered hydrodynamic design that helps deflect loose weeds, hydrilla, and thick lily pads away from your transducer array while moving forward. However, when navigating through extremely dense fields of freshwater vegetation or marsh grass, some debris can occasionally catch in the gap between the transducer and the motor hub. It is always a good practice to periodically raise your trolling motor out of the water to check and clear away any wrapped weeds to maintain full sonar tracking clarity.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this hardware kit rust or cause galvanic corrosion if I operate my boat in saltwater bays?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the Minn Kota MKR-15 is constructed entirely from industrial-grade, non-magnetic marine stainless steel and premium synthetic composite polymers. These specific materials are completely non-ferrous, making them physically immune to rusting, flaking, or pitting when exposed to high-salinity marine environments or brackish tidal rivers. To maximize the operational life of your rigging, simply spray the lower unit and clamp down thoroughly with fresh water along with the rest of your boat after each trip to clear away salt crystal build-up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":48057912164643,"sku":"PV004044","price":39.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV4044_2.jpg?v=1713384541"},{"product_id":"minn-kota-advanced-wireless-remote-system-accessory-lcd-screen-display-1866655","title":"Minn Kota | Advanced Wireless Remote System Accessory | LCD Screen Display | 1866655","description":"\u003cp\u003e\u003cstrong\u003eMinn Kota | Advanced Wireless Remote System Accessory | LCD Screen Display | 1866655\u003c\/strong\u003e\u003c\/p\u003e\n \n \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe Minn Kota | Advanced Wireless Remote System Accessory | LCD Screen Display | 1866655 is a powerful and intuitive control solution designed to give anglers precise command over their Minn Kota trolling motor system. Featuring a crisp, easy-to-read LCD screen, this advanced wireless remote provides real-time feedback and seamless control, allowing you to fine-tune your boat positioning with confidence in any fishing environment.\u003c\/p\u003e\n \n \u003cp\u003eBuilt for compatibility with select Minn Kota trolling motors equipped with advanced wireless control systems, this remote integrates effortlessly into your existing setup. Whether you’re using GPS-enabled features like Spot-Lock®, AutoPilot™, or cruise control functions, the LCD display ensures you always have clear visibility into your motor’s status, settings, and performance. This level of control is especially valuable when navigating changing wind, current, or structure conditions where precision matters most.\u003c\/p\u003e\n \n \u003cp\u003eThe ergonomic design fits comfortably in your hand, while the wireless functionality gives you the freedom to move around your boat without being tethered to a fixed control point. Constructed with durable, marine-grade materials, the remote is engineered to withstand the harsh realities of life on the water, including exposure to sunlight, moisture, and vibration.\u003c\/p\u003e\n \n \u003cp\u003eWhether you're a tournament angler or a weekend fisherman, the Minn Kota Advanced Wireless Remote System with LCD Screen Display enhances your ability to stay on fish, maintain position, and adapt quickly to dynamic conditions.\u003c\/p\u003e\n \n \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n \u003cstrong\u003eLCD Screen Display\u003c\/strong\u003e\u003cbr\u003eProvides clear, real-time feedback on trolling motor status, speed, battery levels, and GPS functions.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eAdvanced Wireless Control\u003c\/strong\u003e\u003cbr\u003eAllows full control of compatible Minn Kota trolling motors from anywhere on the boat.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eGPS Function Integration\u003c\/strong\u003e\u003cbr\u003eSeamlessly controls features like Spot-Lock®, AutoPilot™, and cruise control for precision boat positioning.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eErgonomic Handheld Design\u003c\/strong\u003e\u003cbr\u003eComfortable grip and intuitive button layout for extended use without fatigue.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eReal-Time System Monitoring\u003c\/strong\u003e\u003cbr\u003eStay informed with instant updates on motor performance and settings.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eDurable Marine-Grade Construction\u003c\/strong\u003e\u003cbr\u003eBuilt to handle harsh freshwater and saltwater environments with long-lasting reliability.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eUser-Friendly Interface\u003c\/strong\u003e\u003cbr\u003eSimple navigation through settings and functions with clearly labeled controls.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eEnhanced Mobility on Deck\u003c\/strong\u003e\u003cbr\u003eMove freely while maintaining full command of your trolling motor system.\u003c\/li\u003e \u003c\/ul\u003e\n \n \u003ch3\u003eBenefits\u003c\/h3\u003e \u003cp\u003eThe Minn Kota Advanced Wireless Remote System Accessory with LCD Screen Display transforms the way you interact with your trolling motor by delivering unmatched visibility, control, and convenience. Instead of relying on guesswork or limited feedback, the integrated LCD screen provides instant insight into your motor’s operation, helping you make smarter adjustments in real time. This results in more precise boat positioning, improved fishing efficiency, and a more enjoyable experience on the water. The wireless design eliminates restrictions, allowing you to fish from any position on your boat while maintaining full control. Additionally, its rugged construction ensures dependable performance trip after trip, making it a valuable upgrade for anglers who demand reliability and accuracy in every condition.\u003c\/p\u003e\n \n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eQ: Which trolling motors is this remote compatible with?\u003c\/strong\u003e\u003cbr\u003eA: This remote is designed for use with select Minn Kota trolling motors equipped with advanced wireless control systems. Always verify compatibility with your specific model before purchasing.\u003c\/p\u003e\n \n \u003cp\u003e\u003cstrong\u003eQ: What information does the LCD screen display?\u003c\/strong\u003e\u003cbr\u003eA: The LCD screen provides real-time data such as motor speed, battery status, GPS functions, and system alerts, helping you stay fully informed while operating your motor.\u003c\/p\u003e\n \n \u003cp\u003e\u003cstrong\u003eQ: Can I control GPS features like Spot-Lock® with this remote?\u003c\/strong\u003e\u003cbr\u003eA: Yes, the remote is designed to integrate with Minn Kota GPS-enabled features, allowing you to activate and adjust functions like Spot-Lock®, AutoPilot™, and cruise control.\u003c\/p\u003e\n \n \u003cp\u003e\u003cstrong\u003eQ: Is the remote waterproof?\u003c\/strong\u003e\u003cbr\u003eA: The remote is built with marine-grade materials to resist water exposure, but it should not be fully submerged for extended periods.\u003c\/p\u003e\n \n \u003cp\u003e\u003cstrong\u003eQ: Does this remote require professional installation?\u003c\/strong\u003e\u003cbr\u003eA: No installation is required beyond pairing it with your compatible trolling motor, making it easy to set up and use right out of the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":55288827576611,"sku":"PV1080150","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/27-1866655.jpg?v=1782762583"},{"product_id":"minn-kota-ultrex-trolling-motor-replacement-part-lift-assist-cylinder-52-shaft-1854071","title":"Minn Kota | Ultrex Trolling Motor Replacement Part | Lift Assist Cylinder | 52\" Shaft | 1854071","description":"\u003cp\u003e\u003cstrong\u003eMinn Kota | Ultrex Trolling Motor Replacement Part | Lift Assist Cylinder | 52\" Shaft | 1854071\u003c\/strong\u003e\u003c\/p\u003e\n \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe Minn Kota Ultrex Trolling Motor Replacement Part Lift Assist Cylinder (1854071) is a high-quality OEM component designed to maintain the performance and ease of use of your Ultrex trolling motor. Specifically engineered for models with a 52-inch shaft, this lift assist cylinder ensures smooth and efficient deployment and stowing.\u003c\/p\u003e\n \n \u003cp\u003eAs a critical component of the trolling motor system, the lift assist cylinder reduces the effort required to raise and lower the motor. Over time, wear and tear can affect its performance, making replacement necessary to maintain optimal functionality. This genuine Minn Kota part guarantees proper fitment and restores your motor to its original operating condition.\u003c\/p\u003e\n \n \u003cp\u003eBuilt to withstand rigorous use in demanding marine environments, this cylinder features durable construction and corrosion-resistant materials. It is an essential upgrade or replacement for maintaining peak performance and extending the life of your trolling motor.\u003c\/p\u003e\n \n \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n \u003cstrong\u003eGenuine Minn Kota OEM Part\u003c\/strong\u003e\u003cbr\u003eEnsures compatibility and reliable performance.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eDesigned for 52\" Shaft Ultrex Models\u003c\/strong\u003e\u003cbr\u003ePerfect fit for specified configurations.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eLift Assist Technology\u003c\/strong\u003e\u003cbr\u003eReduces effort required for motor operation.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eDurable Construction\u003c\/strong\u003e\u003cbr\u003eBuilt for long-lasting use.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eCorrosion-Resistant Materials\u003c\/strong\u003e\u003cbr\u003ePerforms well in harsh environments.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eRestores Factory Performance\u003c\/strong\u003e\u003cbr\u003eImproves ease of use and handling.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eEasy Replacement\u003c\/strong\u003e\u003cbr\u003eStraightforward installation process.\u003c\/li\u003e \u003c\/ul\u003e\n \n \u003ch3\u003eProduct Benefits\u003c\/h3\u003e \u003cp\u003eThis lift assist cylinder ensures your Ultrex trolling motor remains easy to operate and efficient. By restoring proper lift assist functionality, it minimizes physical strain and enhances overall convenience. It also helps prevent further wear on surrounding components, protecting your investment. Ideal for anglers who demand consistent performance, this replacement part delivers reliability and peace of mind on every trip.\u003c\/p\u003e\n \n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eQ: How often should I replace the lift assist cylinder?\u003c\/strong\u003e\u003cbr\u003eA: Replacement depends on usage, but signs of wear indicate it’s time for a new one.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Is this compatible with all Ultrex motors?\u003c\/strong\u003e\u003cbr\u003eA: It is designed for models with a 52\" shaft; verify your motor specifications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Why choose an OEM part?\u003c\/strong\u003e\u003cbr\u003eA: OEM parts ensure proper fit, performance, and longevity.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I install it myself?\u003c\/strong\u003e\u003cbr\u003eA: Yes, though professional installation is recommended for best results.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":55288828264739,"sku":"PV1080192","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/100012.jpg?v=1782762583"},{"product_id":"minn-kota-power-prop-trolling-motor-replacement-propeller-extra-thrust-layout-mkp-40-1865040","title":"Minn Kota | Power Prop | Trolling Motor Propeller | Extra Thrust Layout | MKP-40 | 1865040","description":"\u003cp\u003e\u003cstrong\u003eMinn Kota | Power Prop Trolling Motor Replacement Propeller | Extra Thrust Layout | MKP-40 | 1865040\u003c\/strong\u003e\u003c\/p\u003e\n \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe Minn Kota | Power Prop Trolling Motor Replacement Propeller | Extra Thrust Layout | MKP-40 | 1865040 is engineered to deliver maximum pushing power and reliable performance for anglers who demand more from their trolling motor. Designed with an advanced extra thrust blade layout, this replacement propeller is ideal for moving heavier boats, navigating through dense vegetation, and maintaining control in challenging wind and current conditions.\u003c\/p\u003e\n \n \u003cp\u003eBuilt specifically for compatibility with select Minn Kota trolling motors, the MKP-40 Power Prop is a direct replacement that installs quickly and easily. Its design is optimized to generate additional torque at lower speeds, making it especially effective for anglers who need precise boat positioning without sacrificing thrust. Whether you're fishing in shallow, weedy lakes or maneuvering a fully loaded boat, this propeller enhances your motor’s efficiency and responsiveness.\u003c\/p\u003e\n \n \u003cp\u003eThe prop’s rugged construction is designed to withstand impacts, resist wear, and perform consistently in both freshwater and saltwater environments. Its weedless wedge-style design helps deflect and shed vegetation, reducing the likelihood of tangling and allowing you to stay focused on fishing instead of clearing your prop.\u003c\/p\u003e\n \n \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n \u003cstrong\u003eExtra Thrust Power Prop Design\u003c\/strong\u003e\u003cbr\u003eDelivers increased pushing power to move heavier boats and maintain control in tough conditions.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eWeedless Wedge Blade Geometry\u003c\/strong\u003e\u003cbr\u003eHelps cut through weeds and vegetation while minimizing drag and tangling.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eOptimized for Low-Speed Torque\u003c\/strong\u003e\u003cbr\u003eProvides enhanced control and efficiency when precise boat positioning is critical.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eDirect Replacement Fit (MKP-40)\u003c\/strong\u003e\u003cbr\u003eDesigned for easy installation on compatible Minn Kota trolling motors with no modifications required.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eDurable Composite Construction\u003c\/strong\u003e\u003cbr\u003eResists impacts, corrosion, and wear for long-lasting performance in harsh marine environments.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eImproved Efficiency\u003c\/strong\u003e\u003cbr\u003eEnhances overall trolling motor performance by maximizing thrust output and reducing energy loss.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eVersatile Freshwater \u0026amp; Saltwater Use\u003c\/strong\u003e\u003cbr\u003eBuilt to perform reliably in a variety of fishing conditions and environments.\u003c\/li\u003e \u003c\/ul\u003e\n \n \u003ch3\u003eBenefits\u003c\/h3\u003e \u003cp\u003eThe Minn Kota Power Prop MKP-40 significantly improves your trolling motor’s performance by delivering the extra thrust needed to handle demanding conditions with confidence. Whether you're navigating through thick weeds, holding position in strong currents, or powering a heavier boat, this propeller ensures consistent, reliable output. The enhanced low-speed torque allows for more precise control, helping you stay exactly where you want to be while fishing. Additionally, the weedless design reduces interruptions caused by vegetation, saving time and improving overall efficiency on the water. Its durable construction means fewer replacements and greater peace of mind, making it a smart investment for anglers who rely on their trolling motor day in and day out.\u003c\/p\u003e\n \n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eQ: Which trolling motors are compatible with the MKP-40 propeller?\u003c\/strong\u003e\u003cbr\u003eA: The MKP-40 is designed for use with select Minn Kota trolling motors. Always consult your motor’s specifications or owner’s manual to confirm compatibility before purchasing.\u003c\/p\u003e\n \n \u003cp\u003e\u003cstrong\u003eQ: Is this propeller suitable for use in heavy vegetation?\u003c\/strong\u003e\u003cbr\u003eA: Yes, the weedless wedge blade design is specifically engineered to help cut through weeds and minimize tangling, making it ideal for fishing in heavily vegetated waters.\u003c\/p\u003e\n \n \u003cp\u003e\u003cstrong\u003eQ: Does this propeller improve battery efficiency?\u003c\/strong\u003e\u003cbr\u003eA: By optimizing thrust and reducing drag, the MKP-40 can help improve overall motor efficiency, which may contribute to better battery performance during use.\u003c\/p\u003e\n \n \u003cp\u003e\u003cstrong\u003eQ: Can I install this propeller myself?\u003c\/strong\u003e\u003cbr\u003eA: Yes, the MKP-40 is designed for easy installation and can typically be installed with basic tools in just a few minutes.\u003c\/p\u003e\n \n \u003cp\u003e\u003cstrong\u003eQ: Is this propeller durable enough for saltwater use?\u003c\/strong\u003e\u003cbr\u003eA: Absolutely. The composite construction is resistant to corrosion and built to handle both freshwater and saltwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":55288828363043,"sku":"PV1080156","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/27-1865040.jpg?v=1782762582"},{"product_id":"minn-kota-trolling-motor-stabilizer-reinforcement-plate-kit-steel-frame-black-1854058","title":"Minn Kota | Trolling Motor Stabilizer Reinforcement Plate Kit | Steel Frame | Black | 1854058","description":"\u003cp\u003e\u003cstrong\u003eMinn Kota | Trolling Motor Stabilizer Reinforcement Plate Kit | Steel Frame | Black | 1854058\u003c\/strong\u003e\u003c\/p\u003e\n \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe Minn Kota Trolling Motor Stabilizer Reinforcement Plate Kit (1854058) is a heavy-duty mounting enhancement designed to improve the structural integrity and long-term durability of your trolling motor installation. Engineered with a rugged steel frame and finished in a sleek black coating, this reinforcement plate kit is ideal for anglers and boaters who demand maximum stability and reliability from their trolling motor setup.\u003c\/p\u003e\n \n \u003cp\u003eThis kit is specifically designed to reinforce mounting areas on your boat’s deck, distributing the load of your trolling motor more evenly and reducing stress on mounting points. It is compatible with a wide range of Minn Kota trolling motors and mounting brackets, making it an excellent solution for both new installations and upgrades to existing systems.\u003c\/p\u003e\n \n \u003cp\u003eWhether you operate in rough water conditions, frequently trailer your boat, or rely on your trolling motor for precision positioning, this reinforcement plate kit helps prevent flexing, cracking, or long-term wear to your boat’s deck. Its corrosion-resistant steel construction ensures dependable performance in both freshwater and saltwater environments.\u003c\/p\u003e\n \n \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n \u003cstrong\u003eHeavy-Duty Steel Construction\u003c\/strong\u003e\u003cbr\u003eProvides superior strength and reinforcement for trolling motor mounts.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eLoad Distribution Design\u003c\/strong\u003e\u003cbr\u003eEvenly spreads weight and stress across the mounting surface to prevent damage.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eBlack Corrosion-Resistant Finish\u003c\/strong\u003e\u003cbr\u003eProtects against rust and wear in harsh marine environments.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eWide Compatibility\u003c\/strong\u003e\u003cbr\u003eWorks with many Minn Kota trolling motors and mounting systems.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eImproved Mount Stability\u003c\/strong\u003e\u003cbr\u003eReduces flexing and movement during operation and transport.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eIdeal for High-Thrust Motors\u003c\/strong\u003e\u003cbr\u003ePerfect for setups with larger, more powerful trolling motors.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eEasy Installation\u003c\/strong\u003e\u003cbr\u003eDesigned for straightforward integration with existing mounts.\u003c\/li\u003e \u003c\/ul\u003e\n \n \u003ch3\u003eProduct Benefits\u003c\/h3\u003e \u003cp\u003eThis reinforcement plate kit delivers peace of mind by significantly strengthening your trolling motor mounting system. By reducing stress on your boat’s deck, it helps prevent costly damage and extends the lifespan of both your motor and mounting hardware. The improved stability also enhances motor performance by minimizing unwanted movement, resulting in more precise control and smoother operation. Whether you’re navigating choppy waters or trailering long distances, this kit ensures your setup remains secure and reliable.\u003c\/p\u003e\n \n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eQ: Do I need this reinforcement plate for my trolling motor?\u003c\/strong\u003e\u003cbr\u003eA: While not always required, it is highly recommended for high-thrust motors or boats experiencing deck flex.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Is it compatible with all Minn Kota mounts?\u003c\/strong\u003e\u003cbr\u003eA: It is compatible with many models, but checking your specific mount configuration is advised.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can it be used in saltwater?\u003c\/strong\u003e\u003cbr\u003eA: Yes, the corrosion-resistant coating makes it suitable for saltwater use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Does installation require drilling?\u003c\/strong\u003e\u003cbr\u003eA: Some installations may require drilling depending on your boat setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":55288828395811,"sku":"PV1080152","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/100005.jpg?v=1782762583"},{"product_id":"minn-kota-micro-remote-control-expansion-accessory-bluetooth-link-1866561","title":"Minn Kota | Micro Remote Control Expansion Accessory | Bluetooth Link | 1866561","description":"\u003cp\u003e\u003cstrong\u003eMinn Kota – Micro Remote Control Expansion Accessory – Bluetooth Link – 1866561\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eEnhance your boat's performance with the \u003cstrong\u003eMinn Kota – Micro Remote Control Expansion Accessory – Bluetooth Link – 1866561\u003c\/strong\u003e. A premium accessory designed to integrate seamlessly into your existing Minn Kota setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003eFunction:\u003c\/strong\u003e Micro Remote Control Expansion Accessory\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eModel:\u003c\/strong\u003e 1866561\u003c\/li\u003e\n \u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: How do I install this accessory?\u003c\/strong\u003e\u003cbr\u003eConsult the included manual for step-by-step instructions specific to your motor series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":55288828821795,"sku":"PV1080189","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/99994.jpg?v=1782762582"},{"product_id":"minn-kota-weedless-wedge-2-trolling-motor-replacement-propeller-dual-blade-mkp-39-1865039","title":"Minn Kota | Trolling Motor Propeller | Weedless Wedge 2 Prop | Dual Blade | MKP-39 | 1865039","description":"\u003cp\u003e\u003cstrong\u003eMinn Kota | Weedless Wedge 2 Trolling Motor Replacement Propeller | Dual Blade | MKP-39 | 1865039\u003c\/strong\u003e\u003c\/p\u003e\n \u003ch3\u003eOverview\u003c\/h3\u003e\n \u003cp\u003eThe Minn Kota Weedless Wedge 2 Propeller (MKP-39 \/ Part #1865039) is a high-performance replacement prop designed to deliver superior thrust while minimizing weed and debris interference. Engineered with an advanced dual-blade design, this propeller is ideal for anglers navigating heavy vegetation, shallow water, and structure-filled environments. It is compatible with a wide range of Minn Kota trolling motors, making it a versatile and reliable upgrade or replacement option.\u003c\/p\u003e\n \u003cp\u003eThe Weedless Wedge 2 is specifically designed to push weeds away rather than cutting through them, significantly reducing drag and preventing frustrating slowdowns. Whether you're fishing in thick grass beds or cruising through debris-prone waters, this prop ensures consistent performance and efficiency. Its durable construction and optimized blade geometry provide excellent power transfer, allowing your trolling motor to operate at peak performance.\u003c\/p\u003e\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003eWeedless Wedge 2 Design\u003c\/strong\u003e – Pushes weeds away to prevent clogging and maintain performance.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eDual-Blade Configuration\u003c\/strong\u003e – Delivers strong thrust and efficient power usage.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eGenuine Minn Kota OEM Part (1865039 \/ MKP-39)\u003c\/strong\u003e – Ensures perfect compatibility and reliability.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eWide Compatibility\u003c\/strong\u003e – Fits multiple Minn Kota trolling motor models.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eDurable Composite Construction\u003c\/strong\u003e – Resistant to impact, corrosion, and wear.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eEasy Installation\u003c\/strong\u003e – Quick replacement with included hardware.\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eProduct Benefits\u003c\/h3\u003e\n \u003cp\u003eThe Minn Kota Weedless Wedge 2 Propeller is a must-have for anglers who frequently fish in vegetation-heavy environments. Traditional propellers can become easily entangled, reducing efficiency and forcing constant clearing. This advanced design eliminates that frustration by naturally deflecting weeds, allowing you to stay focused on fishing instead of maintenance.\u003c\/p\u003e\n \u003cp\u003eIts dual-blade configuration provides an ideal balance of power and efficiency, ensuring smooth operation and extended battery life. The rugged construction withstands impacts from submerged objects, making it a dependable choice for challenging conditions. By upgrading or replacing your prop with the Weedless Wedge 2, you improve maneuverability, maintain consistent speed, and enhance overall trolling motor performance.\u003c\/p\u003e\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cp\u003e\u003cstrong\u003eQ: What makes the Weedless Wedge 2 different from standard props?\u003c\/strong\u003e A: Its unique design pushes weeds away instead of cutting through them, reducing clogging and drag.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eQ: Is this prop compatible with all Minn Kota trolling motors?\u003c\/strong\u003e A: It fits many models, but you should confirm compatibility with your specific motor before purchasing.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eQ: Does this prop improve battery life?\u003c\/strong\u003e A: Yes, its efficient design reduces drag, which can help extend battery runtime.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eQ: Is installation complicated?\u003c\/strong\u003e A: No, installation is quick and simple using standard tools and included hardware.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eQ: Can this prop handle heavy vegetation?\u003c\/strong\u003e A: Yes, it is specifically designed for excellent performance in thick weeds and debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":55288829378851,"sku":"PV1080155","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/27-1865039.jpg?v=1782762582"},{"product_id":"minn-kota-terrova-corded-foot-pedal-accessory-low-profile-control-1866077","title":"Minn Kota | Terrova Corded Foot Pedal Accessory | Low-Profile Control | 1866077","description":"\u003cp\u003e\u003cstrong\u003eMinn Kota | Terrova Corded Foot Pedal Accessory | Low-Profile Control | 1866077\u003c\/strong\u003e\u003c\/p\u003e\n \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe Minn Kota Terrova Corded Foot Pedal Accessory (1866077) is a premium control solution designed to enhance the functionality and responsiveness of your Terrova trolling motor. Built specifically for compatibility with Minn Kota Terrova models, this low-profile foot pedal provides anglers with precise, hands-free control, allowing for seamless boat positioning while focusing on fishing.\u003c\/p\u003e\n \n \u003cp\u003eThis accessory is engineered for intuitive operation, offering responsive steering, speed adjustments, and momentary or constant-on control. Its low-profile design reduces fatigue during extended use, making it ideal for serious anglers who spend long hours on the water. Designed with durability and performance in mind, the pedal integrates seamlessly with Terrova trolling motors, ensuring reliable communication and smooth operation.\u003c\/p\u003e\n \n \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n \u003cstrong\u003eLow-Profile Design\u003c\/strong\u003e\u003cbr\u003eReduces foot fatigue and improves comfort during extended use.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eCorded Connection\u003c\/strong\u003e\u003cbr\u003eProvides consistent, reliable communication with your Terrova motor.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eResponsive Steering Control\u003c\/strong\u003e\u003cbr\u003eAllows precise directional adjustments for accurate boat positioning.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eMomentary and Constant Operation\u003c\/strong\u003e\u003cbr\u003eOffers flexibility in motor control depending on fishing conditions.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eDurable Construction\u003c\/strong\u003e\u003cbr\u003eBuilt to withstand harsh marine environments.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003ePlug-and-Play Compatibility\u003c\/strong\u003e\u003cbr\u003eDesigned specifically for Minn Kota Terrova trolling motors.\u003c\/li\u003e \u003c\/ul\u003e\n \n \u003ch3\u003eProduct Benefits\u003c\/h3\u003e \u003cp\u003eThis foot pedal enhances your on-the-water experience by delivering precise control and improved efficiency. Its ergonomic design minimizes fatigue, while the corded reliability ensures uninterrupted performance. Whether navigating tight fishing spots or maintaining position in current, this accessory gives anglers greater confidence and control.\u003c\/p\u003e\n \n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eQ: Is this compatible with all Terrova models?\u003c\/strong\u003e\u003cbr\u003eA: It is designed for most modern Terrova trolling motors; always verify compatibility with your specific model.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Does it require batteries?\u003c\/strong\u003e\u003cbr\u003eA: No, the corded design eliminates the need for batteries.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I use this alongside a remote?\u003c\/strong\u003e\u003cbr\u003eA: Yes, it can be used in conjunction with wireless remotes for added control options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":55288830099747,"sku":"PV1080186","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/27-1866077.jpg?v=1782762583"},{"product_id":"minn-kota-ultrex-trolling-motor-replacement-part-lift-assist-cylinder-80-lb-45-1854070","title":"Minn Kota | Ultrex Trolling Motor Replacement Part | Lift Assist Cylinder | 80 lb \/ 45\" | 1854070","description":"\u003cp\u003e\u003cstrong\u003eMinn Kota | Ultrex Trolling Motor Replacement Part | Lift Assist Cylinder | 80 lb \/ 45\" | 1854070\u003c\/strong\u003e\u003c\/p\u003e\n \u003ch3\u003eOverview\u003c\/h3\u003e\n \u003cp\u003eThe Minn Kota Ultrex Lift Assist Cylinder (Part #1854070) is a genuine OEM replacement component designed to restore smooth, controlled deployment and stowing of your Ultrex trolling motor. Built specifically for Ultrex models with 80 lb thrust and a 45-inch shaft, this lift assist cylinder plays a critical role in reducing the effort required to raise and lower your motor. Whether your existing cylinder has worn out over time or lost its effectiveness due to repeated use in demanding marine conditions, this replacement ensures your trolling motor operates like new again.\u003c\/p\u003e\n \u003cp\u003eManufactured to Minn Kota’s strict quality standards, this cylinder integrates seamlessly with compatible Ultrex trolling motors, maintaining factory-level performance and reliability. It is engineered to withstand harsh freshwater and saltwater environments, ensuring consistent operation trip after trip. This component is essential for anglers who rely on frequent motor deployment throughout the day and want to maintain optimal ergonomics and ease of use.\u003c\/p\u003e\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n \u003cstrong\u003eGenuine Minn Kota OEM Part (1854070)\u003c\/strong\u003e – Designed specifically for Ultrex trolling motors to ensure perfect fit and performance.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eLift Assist Technology\u003c\/strong\u003e – Reduces the physical effort required to deploy and stow the motor.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eCompatible with 80 lb \/ 45” Shaft Ultrex Models\u003c\/strong\u003e – Precision-engineered for exact compatibility.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eDurable Construction\u003c\/strong\u003e – Built to handle repeated use and harsh marine environments.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eSmooth Operation\u003c\/strong\u003e – Restores factory-like deployment and retraction performance.\u003c\/li\u003e\n \u003cli\u003e\n \u003cstrong\u003eDirect Replacement\u003c\/strong\u003e – Simple installation with no modifications required.\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eProduct Benefits\u003c\/h3\u003e\n \u003cp\u003eThe Minn Kota Ultrex Lift Assist Cylinder is essential for maintaining the usability and comfort of your trolling motor system. Over time, lift assist components can wear down, making deployment more difficult and putting strain on your arms and shoulders. Replacing the cylinder restores smooth, controlled motion, allowing you to focus on fishing rather than struggling with equipment. This is especially valuable during long days on the water when repeated adjustments are necessary.\u003c\/p\u003e\n \u003cp\u003eBy installing a genuine Minn Kota replacement part, you ensure your trolling motor continues to perform as originally designed. The improved ease of use enhances efficiency, reduces fatigue, and contributes to a safer boating experience. Whether you're a tournament angler or a weekend fisherman, this component helps you maintain peak performance and extend the life of your trolling motor investment.\u003c\/p\u003e\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cp\u003e\u003cstrong\u003eQ: Is this lift assist cylinder compatible with all Ultrex models?\u003c\/strong\u003e A: No, this part is specifically designed for Ultrex trolling motors with 80 lb thrust and a 45-inch shaft.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eQ: How do I know if my lift assist cylinder needs replacement?\u003c\/strong\u003e A: If your motor feels heavier to lift, drops quickly, or doesn’t hold smoothly during deployment, it may be time to replace the cylinder.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eQ: Is installation difficult?\u003c\/strong\u003e A: Installation is straightforward for most users with basic mechanical skills, but professional installation is recommended if you’re unsure.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eQ: Can I use an aftermarket cylinder instead?\u003c\/strong\u003e A: While aftermarket options exist, using a genuine Minn Kota part ensures proper fit, performance, and durability.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eQ: Does this part require maintenance?\u003c\/strong\u003e A: The cylinder itself is maintenance-free, but regular inspection of your trolling motor system is recommended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":55288830984483,"sku":"PV1080191","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/100011.jpg?v=1782762584"},{"product_id":"minn-kota-ultrex-trolling-motor-replacement-part-lift-assist-cylinder-112-lb-45-1854072","title":"Minn Kota | Ultrex Trolling Motor Replacement Part | Lift Assist Cylinder | 112 lb \/ 45\" | 1854072","description":"\u003cp\u003e\u003cstrong\u003eMinn Kota | Ultrex Trolling Motor Replacement Part | Lift Assist Cylinder | 112 lb \/ 45\" | 1854072\u003c\/strong\u003e\u003c\/p\u003e\n \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe Minn Kota Ultrex Trolling Motor Replacement Part Lift Assist Cylinder (1854072) is designed to maintain and restore the effortless lift-assist functionality of your Ultrex trolling motor. Specifically engineered for 112 lb thrust models with a 45-inch shaft, this component ensures smooth operation when deploying and stowing your motor.\u003c\/p\u003e\n \n \u003cp\u003eThis genuine OEM part is manufactured to Minn Kota’s exact specifications, guaranteeing compatibility and performance. Over time, lift assist cylinders can lose efficiency due to wear and environmental exposure. Replacing the cylinder helps maintain optimal motor handling and prevents additional strain on related components.\u003c\/p\u003e\n \n \u003cp\u003eBuilt from durable, corrosion-resistant materials, this lift assist cylinder is capable of withstanding tough marine conditions. It is an essential maintenance component for anglers who rely on consistent performance and ease of use from their trolling motor system.\u003c\/p\u003e\n \n \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n \u003cstrong\u003eOEM Replacement Component\u003c\/strong\u003e\u003cbr\u003eEnsures proper fit and reliable operation.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eDesigned for 112 lb Ultrex Motors\u003c\/strong\u003e\u003cbr\u003eCompatible with 45-inch shaft configurations.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eLift Assist Functionality\u003c\/strong\u003e\u003cbr\u003eReduces physical effort during motor deployment.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eHigh-Strength Construction\u003c\/strong\u003e\u003cbr\u003eBuilt for durability and long-term use.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eCorrosion-Resistant Materials\u003c\/strong\u003e\u003cbr\u003eSuitable for freshwater and saltwater conditions.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eRestores Smooth Operation\u003c\/strong\u003e\u003cbr\u003eImproves usability and handling.\u003c\/li\u003e \u003cli\u003e\n \u003cstrong\u003eDirect Replacement Fit\u003c\/strong\u003e\u003cbr\u003eSimplifies installation process.\u003c\/li\u003e \u003c\/ul\u003e\n \n \u003ch3\u003eProduct Benefits\u003c\/h3\u003e \u003cp\u003eThis lift assist cylinder enhances your boating experience by restoring smooth and efficient motor operation. By reducing strain during lifting and lowering, it improves comfort and usability, especially during long days on the water. It also protects other components from excessive wear, helping to extend the overall lifespan of your trolling motor. With its durable construction and precise engineering, this replacement part ensures consistent performance and reliability.\u003c\/p\u003e\n \n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eQ: What are signs of a failing lift assist cylinder?\u003c\/strong\u003e\u003cbr\u003eA: Increased resistance or difficulty when lifting the motor is a common sign.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Is this compatible with other thrust ratings?\u003c\/strong\u003e\u003cbr\u003eA: No, it is specifically designed for 112 lb Ultrex models with a 45\" shaft.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I use aftermarket alternatives?\u003c\/strong\u003e\u003cbr\u003eA: OEM parts are recommended for best performance and compatibility.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Is installation difficult?\u003c\/strong\u003e\u003cbr\u003eA: It is manageable for experienced users, but professional installation is an option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"Default Title","offer_id":55288830886179,"sku":"PV1080193","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/100013.jpg?v=1782762583"},{"product_id":"minn-kota-minn-kota-foot-controls","title":"Minn Kota | Foot Controls | Corded \u0026 Wireless Controls","description":"\u003ch2\u003eMinn Kota Minn Kota Foot Controls\u003c\/h2\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003eThe \u003cstrong\u003eMinn Kota Foot Controls\u003c\/strong\u003e collection provides responsive, hands-free operation for select Minn Kota trolling motors and shallow water anchors. Designed for comfort, precision, and durability, these foot controls give anglers convenient access to steering, speed adjustments, anchoring functions, and other key features while keeping their hands free for fishing. Available in corded and wireless configurations, Minn Kota foot controls deliver reliable performance and seamless integration with compatible Minn Kota products.\u003c\/div\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eChoose Your Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Series:\u003c\/strong\u003e Choose from Raptor, PowerDrive, Talon, Terrova, Ulterra, Riptide Instinct Quest, Terrova Quest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e Choose from Footswitch, Foot Pedal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Choose from Bluetooth, Corded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHands-Free Operation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eControl key functions without taking your hands off your rod.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponsive Controls:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProvides precise operation of compatible trolling motors and anchors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorded \u0026amp; Wireless Options:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAvailable in both corded and Bluetooth-enabled configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBuilt to withstand demanding marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Integration:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesigned specifically for compatible Minn Kota products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLow-profile construction helps reduce deck clutter.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelected Minn Kota Foot Controls\u003c\/li\u003e\n\u003cli\u003eModel-Specific Hardware or Connection Components\u003c\/li\u003e\n\u003cli\u003eInstallation or Owner Documentation, When Supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eExact box contents vary by the selected SKU and product configuration.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: Which Minn Kota products are these foot controls compatible with?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Compatibility varies by model. Available options support select Minn Kota trolling motors and shallow water anchors, including Terrova, Ulterra, Raptor, Talon, and QUEST models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: What is the difference between a foot pedal and a footswitch?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Foot pedals typically offer multiple control functions, while footswitches are designed for quick activation of specific features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Are Bluetooth foot controls wireless?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. Bluetooth-enabled foot controls communicate wirelessly with compatible Minn Kota products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: Can I replace an existing foot control with a new one?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, provided the replacement model is compatible with your Minn Kota trolling motor or anchor system.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"PowerDrive \/ Foot Pedal \/ Bluetooth","offer_id":55336868741411,"sku":"C-PV015160","price":159.69,"currency_code":"USD","in_stock":true},{"title":"Raptor \/ Footswitch \/ Bluetooth","offer_id":55336868774179,"sku":"C-PV783762","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Riptide Instinct Quest \/ Foot Pedal \/ Corded","offer_id":55336868806947,"sku":"C-PV1080188","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Talon \/ Foot Pedal \/ Bluetooth","offer_id":55336868839715,"sku":"C-PV017811","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Talon \/ Footswitch \/ Bluetooth","offer_id":55336868872483,"sku":"C-PV789960","price":154.79,"currency_code":"USD","in_stock":true},{"title":"Terrova \/ Foot Pedal \/ Corded","offer_id":55336868905251,"sku":"C-PV1080186","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Terrova Quest \/ Foot Pedal \/ Corded","offer_id":55336868938019,"sku":"C-PV1080157","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Ulterra \/ Foot Pedal \/ Corded","offer_id":55336868970787,"sku":"C-PV1080187","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV15160_03be4dab-dde8-4326-92b1-6d91bb9851c2.jpg?v=1784049139"},{"product_id":"minn-kota-quick-release-mounting-brackets","title":"Minn Kota | Quick Release Mounting Brackets","description":"\u003ch2\u003eMinn Kota Quick Release Mounting Brackets\u003c\/h2\u003e\n\u003cdiv\u003eThe \u003cstrong\u003eMinn Kota Quick Release Mounting Brackets\u003c\/strong\u003e provide a secure and convenient way to attach and remove compatible Minn Kota trolling motors. Designed for strength, stability, and ease of use, these brackets allow anglers to quickly remove their trolling motor for storage, maintenance, or transport while maintaining a solid connection on the water. Built with durable, marine-grade materials, Quick Release Mounting Brackets help simplify installation and improve overall versatility for your trolling motor setup.\u003c\/div\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Release Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEasily remove and reattach compatible trolling motors as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Mounting Platform:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProvides a stable connection between the trolling motor and boat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBuilt with marine-grade materials for long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesigned for straightforward mounting and setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient Storage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSimplifies motor removal for transport, maintenance, and security.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Finish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEngineered to withstand demanding marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinn Kota Compatible:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesigned for use with select Minn Kota trolling motors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr style=\"margin: 24px 0;\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What is a Minn Kota Quick Release Mounting Bracket?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It is a mounting system that allows compatible Minn Kota trolling motors to be quickly removed and reinstalled without removing the entire mounting setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Why would I use a Quick Release Mounting Bracket?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It makes it easier to remove your trolling motor for storage, maintenance, transport, or theft prevention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Are Minn Kota Quick Release Mounting Brackets durable?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. They are constructed from heavy-duty marine-grade materials designed for long-term use in boating environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: Are these brackets compatible with all Minn Kota trolling motors?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Compatibility varies by model. Always verify that the bracket is compatible with your specific Minn Kota trolling motor before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/p65warnings.ca.gov\/\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Minn Kota","offers":[{"title":"MKA-57","offer_id":55336878473507,"sku":"C-PV1080158","price":529.99,"currency_code":"USD","in_stock":true},{"title":"MKA-21","offer_id":55336878506275,"sku":"C-PV001402","price":99.99,"currency_code":"USD","in_stock":true},{"title":"MKA-56","offer_id":55336878539043,"sku":"C-PV1080151","price":419.99,"currency_code":"USD","in_stock":true},{"title":"MKA-64","offer_id":55336878571811,"sku":"C-PV1080160","price":239.99,"currency_code":"USD","in_stock":true},{"title":"RTA-17","offer_id":55336878604579,"sku":"C-PV001960","price":99.99,"currency_code":"USD","in_stock":true},{"title":"MKA-16-03","offer_id":55336878637347,"sku":"C-PV015158","price":79.99,"currency_code":"USD","in_stock":true},{"title":"MKA-23","offer_id":55336878670115,"sku":"C-PV003082","price":156.95,"currency_code":"USD","in_stock":true},{"title":"MKA-32","offer_id":55336878702883,"sku":"C-PV001637","price":179.99,"currency_code":"USD","in_stock":true},{"title":"MKA-61","offer_id":55336878735651,"sku":"C-PV1080153","price":219.99,"currency_code":"USD","in_stock":true},{"title":"MKA-62","offer_id":55336878768419,"sku":"C-PV1080154","price":239.99,"currency_code":"USD","in_stock":true},{"title":"RTA-19","offer_id":55336878801187,"sku":"C-PV002157","price":114.99,"currency_code":"USD","in_stock":true},{"title":"RTA-55","offer_id":55336878833955,"sku":"C-PV1080115","price":419.99,"currency_code":"USD","in_stock":true},{"title":"RTA-62","offer_id":55336878866723,"sku":"C-PV1080159","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/MK_1854057_MKA-57_v2_3qLClosed.webp?v=1784123087"}],"url":"https:\/\/partsvu.com\/en-ca\/collections\/trolling-motor-accessories.oembed?page=2","provider":"PartsVu","version":"1.0","type":"link"}