{"product_id":"fuel-line-assembly-32-8m0061894","title":"Mercury – Fuel Line Assembly for Mercury and Mariner Outboards | Fuel System | Low-Permeation Gray Hose | 8M0061894","description":"\u003cp data-start=\"0\" data-end=\"133\"\u003e\u003cstrong data-start=\"0\" data-end=\"131\"\u003eMercury – Fuel Line Assembly for Mercury and Mariner Outboards | Fuel System | Low-Permeation Gray Hose | 8M0061894\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"135\" data-end=\"714\"\u003e\u003cstrong data-start=\"135\" data-end=\"147\"\u003eOverview\u003c\/strong\u003e\u003cbr data-start=\"147\" data-end=\"150\"\u003eIf you have ever stood at the ramp squeezing a tired old primer bulb while your outboard refuses to wake up, you know how quickly a fuel line can ruin a good morning. When the line is right, you barely think about it. A few squeezes, the engine lights, and you are backing away from the dock with a grin. The Mercury 8M0061894 Fuel Line Assembly is built for that kind of start. It is a Mercury Marine part you install once and then quietly trust, season after season, whether you are cruising the shoreline at sunset or pushing hard to beat the weather back in.\u003c\/p\u003e\n\u003cp data-start=\"716\" data-end=\"734\"\u003e\u003cstrong data-start=\"716\" data-end=\"732\"\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"735\" data-end=\"1338\"\u003e\n\u003cli data-start=\"735\" data-end=\"828\"\u003e\n\u003cp data-start=\"737\" data-end=\"828\"\u003eComplete fuel line assembly designed to maintain clean, steady fuel flow to your outboard\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"829\" data-end=\"903\"\u003e\n\u003cp data-start=\"831\" data-end=\"903\"\u003eLow permeation fuel line hose engineered for modern marine fuel blends\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"904\" data-end=\"983\"\u003e\n\u003cp data-start=\"906\" data-end=\"983\"\u003eIncludes integral primer bulb for firm, reliable priming before cold starts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"984\" data-end=\"1055\"\u003e\n\u003cp data-start=\"986\" data-end=\"1055\"\u003eQuick disconnect fitting at the engine end for easy, secure hook up\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1056\" data-end=\"1170\"\u003e\n\u003cp data-start=\"1058\" data-end=\"1170\"\u003eQuick connector at the tank end that mates with the pigtail on new pressurized six point six gallon fuel tanks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1171\" data-end=\"1258\"\u003e\n\u003cp data-start=\"1173\" data-end=\"1258\"\u003eGray hose color helps reflect heat and reduce the chance of vapor lock on warm days\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1259\" data-end=\"1338\"\u003e\n\u003cp data-start=\"1261\" data-end=\"1338\"\u003eGenuine Mercury Marine part number 8M0061894 for proper fit and performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1340\" data-end=\"1373\"\u003e\u003cstrong data-start=\"1340\" data-end=\"1371\"\u003eEngine \u0026amp; Boat Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1374\" data-end=\"1821\"\u003e\n\u003cli data-start=\"1374\" data-end=\"1461\"\u003e\n\u003cp data-start=\"1376\" data-end=\"1461\"\u003eDesigned for use with Mercury outboards equipped for clip on style fuel connections\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1462\" data-end=\"1531\"\u003e\n\u003cp data-start=\"1464\" data-end=\"1531\"\u003eCompatible with Mariner outboards using the same connection style\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1532\" data-end=\"1630\"\u003e\n\u003cp data-start=\"1534\" data-end=\"1630\"\u003eConnects directly to the pigtail on newer pressurized six point six gallon portable fuel tanks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1631\" data-end=\"1728\"\u003e\n\u003cp data-start=\"1633\" data-end=\"1728\"\u003eIdeal for smaller fishing boats, dinghies, runabouts, and aluminum skiffs with portable tanks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1729\" data-end=\"1821\"\u003e\n\u003cp data-start=\"1731\" data-end=\"1821\"\u003eA great match for owners upgrading from an older, cracked, or mismatched fuel line setup\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1823\" data-end=\"2263\"\u003e\u003cstrong data-start=\"1823\" data-end=\"1859\"\u003ePerformance \u0026amp; Practical Benefits\u003c\/strong\u003e\u003cbr data-start=\"1859\" data-end=\"1862\"\u003eYou feel this fuel line working every time you prime the system and the engine fires without drama. The primer bulb on part number 8M0061894 feels solid in your hand, not spongy or dry. A few squeezes and you can tell fuel is moving, line filling, and the engine is ready to go. Starts are quicker, and there is less of that uneasy pause while everyone on board waits to see if the motor will catch.\u003c\/p\u003e\n\u003cp data-start=\"2265\" data-end=\"2844\"\u003eOnce you are underway, the low permeation hose helps keep the fuel where it belongs. You will notice fewer fuel smells in the cockpit and a more consistent, steady supply to the engine. The gray outer layer reflects sunlight, keeping temperatures in check and reducing vapor lock on hot afternoons when the tank bakes in the stern. The quick connectors at both ends snap in with a clean, secure feel that is tight and reassuring. You can swap tanks or disconnect for storage without wrestling with stubborn fittings or wondering if something will leak when the sea gets choppy.\u003c\/p\u003e\n\u003cp data-start=\"2846\" data-end=\"3275\"\u003e\u003cstrong data-start=\"2846\" data-end=\"2861\"\u003eWhy Buy OEM\u003c\/strong\u003e\u003cbr data-start=\"2861\" data-end=\"2864\"\u003eFuel delivery is not a place to gamble with guesswork parts. A genuine Mercury Marine part like the 8M0061894 Fuel Line Assembly is designed around the specific connectors, fuel demands, and conditions that Mercury and Mariner outboards see every day. The hose material, bulb design, and fittings are chosen to handle marine fuel, vibration, and temperature swings, not just look close enough on a parts wall.\u003c\/p\u003e\n\u003cp data-start=\"3277\" data-end=\"3778\"\u003eCould you build a fuel line from bulk hose and random connectors? Probably. But you will spend more time matching parts and still wonder if something is slightly off. With this Mercury Marine part, the engineering is already done. You get a clean, matched assembly that simply works, which usually ends up cheaper than chasing fuel issues later. If a friend at the marina asked what fuel line to run with a portable Mercury tank, this is the kind of setup you would recommend without thinking twice.\u003c\/p\u003e\n\u003cp data-start=\"3780\" data-end=\"3789\"\u003e\u003cstrong data-start=\"3780\" data-end=\"3787\"\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"3791\" data-end=\"4054\"\u003e\u003cstrong data-start=\"3791\" data-end=\"3863\"\u003eQ1: Which engines does the Mercury 8M0061894 Fuel Line Assembly fit?\u003c\/strong\u003e\u003cbr data-start=\"3863\" data-end=\"3866\"\u003eIt is designed for Mercury and Mariner outboards that use clip on style disconnects and portable fuel tanks, including those with the newer pressurized six point six gallon tank pigtail.\u003c\/p\u003e\n\u003cp data-start=\"4056\" data-end=\"4362\"\u003e\u003cstrong data-start=\"4056\" data-end=\"4118\"\u003eQ2: What makes this different from aftermarket fuel lines?\u003c\/strong\u003e\u003cbr data-start=\"4118\" data-end=\"4121\"\u003eThis fuel line assembly is a Mercury Marine part built to factory specifications, with low permeation hose, a correctly matched primer bulb, and connectors designed specifically for Mercury and Mariner systems rather than generic fittings.\u003c\/p\u003e\n\u003cp data-start=\"4364\" data-end=\"4690\"\u003e\u003cstrong data-start=\"4364\" data-end=\"4434\"\u003eQ3: How do I know if this is the correct replacement for my setup?\u003c\/strong\u003e\u003cbr data-start=\"4434\" data-end=\"4437\"\u003eCheck that your engine and tank both use clip on style connectors and that your portable tank uses the pressurized pigtail connection. If your manual or existing rigging calls out part number 8M0061894 or equivalent, this assembly is the right choice.\u003c\/p\u003e\n\u003cp data-start=\"4692\" data-end=\"4963\"\u003e\u003cstrong data-start=\"4692\" data-end=\"4763\"\u003eQ4: Can this be used in both saltwater and freshwater applications?\u003c\/strong\u003e\u003cbr data-start=\"4763\" data-end=\"4766\"\u003eYes. The fuel line assembly is suitable for boats that live on freshwater lakes or saltwater bays. Just include it in your regular inspection routine, as you would with any fuel system component.\u003c\/p\u003e\n\u003cp data-start=\"4965\" data-end=\"5245\"\u003e\u003cstrong data-start=\"4965\" data-end=\"5026\"\u003eQ5: Is installation straightforward for most boat owners?\u003c\/strong\u003e\u003cbr data-start=\"5026\" data-end=\"5029\"\u003eFor most owners, it is very simple. You disconnect the old line, clip the new connectors into the engine and tank, route the hose neatly, and check for a secure, leak free fit before priming and starting the motor.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46940631269667,"sku":"32-8M0061894","price":105.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0061894_main.jpg?v=1760631354","url":"https:\/\/partsvu.com\/en-ca\/products\/fuel-line-assembly-32-8m0061894","provider":"PartsVu","version":"1.0","type":"link"}