{"product_id":"mercury-decal-set-175-pxs-37-8m0214850","title":"Mercury – Rear Cowling Decal Set for 3.4L V6 175HP Pro XS Outboards | Cowling Restoration Kit | Factory-Matched Marine Graphics | 8M0214850","description":"\u003ch2\u003e\u003cspan data-preserver-spaces=\"true\"\u003eMercury – Rear Cowling Decal Set for 3.4L V6 175HP Pro XS Outboards | Cowling Restoration Kit | Factory-Matched Marine Graphics | 8M0214850\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eOverview\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Every boater has a moment when they glance back at the motor — maybe while drifting in the morning calm or trimming up before a long run — and feel that quiet pride that only comes from owning a Pro XS. These engines are built to perform, to leap onto plane and pull steady through wind and chop. But the cowling takes a beating along the way. Sun, spray and constant travel slowly wear at the artwork until the engine doesn’t look as sharp as it runs. This Mercury decal set gives your Pro XS that fresh, confident look again. It’s a simple upgrade that restores the personality of your motor — bold, clean and ready for more miles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eKey Features\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFactory-matched decal set for Mercury three point four liter V6 one hundred seventy-five horsepower Pro XS outboards\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eIncludes rear one hundred seventy-five horsepower Pro decal, rear Mercury wordmark, V6 badge and three red M-icons\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eDesigned to replicate original Mercury styling with precise scale and alignment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003ePrinted with high-strength marine-grade inks for long-lasting color and clarity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eAdhesive engineered for durability under heat, vibration, spray and sun exposure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eMercury Marine part number 8M0214850\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFits rear cowling surfaces without trimming or modification\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eEngine \u0026amp; Boat Compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFits Mercury three point four liter V6 one hundred seventy-five horsepower Pro XS outboards\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003ePerfect for bass anglers, tournament boats, performance skiffs and fast freshwater rigs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eGreat for owners restoring a used outboard or replacing faded original graphics\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eSuitable for both freshwater and saltwater environments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003ePerformance \u0026amp; Practical Benefits\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e When you lay down these decals, something clicks — the engine instantly looks younger, stronger and more cared for. The bold Pro XS identity returns, and the three red M-icons add that unmistakable Mercury character you see on well-kept tournament rigs. Once applied, the decals settle smoothly and stay tight, holding their edges even on curved surfaces. There’s no awkward bubbling, no peeling corners, no fading after a few weekends under the sun.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e The marine-grade adhesive is tough enough to handle the vibration of long runs and the punishment of trailering. Whether you fish rivers, lakes or big water, you’ll notice how well the graphics hold up after repeated washdowns and heavy spray. The fresh look also does wonders for resale value. A buyer can tell instantly whether an engine has been cared for, and a clean cowling speaks louder than anything you could tell them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Most of all, it just feels good to look back and see your Pro XS looking like itself again. The clean lines, the deep black background, the red accents — everything snaps back into place, ready for another season.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eWhy Buy OEM\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Decals might seem simple, but the exact fit, color and adhesive strength matter more than you’d expect. Aftermarket sets often look close, but the color shading is slightly off, the adhesive fails early or the proportions don’t follow the cowling’s curves correctly. With an OEM Mercury Marine part, you get the real artwork — the exact tones, the correct thickness, the same materials used on factory engines.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Choosing OEM means the decals last longer, stay brighter and fit exactly the way Mercury designed them to. It’s the practical choice for any boater who wants their outboard to look as good as it runs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFAQ\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eQ1: Which outboards does the Decal Set 8M0214850 fit?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eIt fits Mercury \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003ethree point four liter\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e V6 \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eone hundred \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eseventy-five horsepower\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Pro XS outboards.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eQ2: What makes these decals better than aftermarket versions?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e They match Mercury’s original color, scale and adhesive quality, giving you a long-lasting, factory-accurate appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eQ3: How can I be sure this is the correct set?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e If your engine is a 175HP V6 Pro XS and you’re replacing the rear cowling graphics, this is the correct Mercury Marine part number.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eQ4: Can these decals handle saltwater exposure?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Yes — the inks and adhesive are designed for both freshwater and saltwater environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eQ5: Is installation manageable for most boat owners?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Absolutely. With patience and a clean surface, most owners can apply these decals at home.\u003c\/span\u003e\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46940318236963,"sku":"37-8M0214850","price":53.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8M0214850_Main.jpg?v=1760631588","url":"https:\/\/partsvu.com\/en-ca\/products\/mercury-decal-set-175-pxs-37-8m0214850","provider":"PartsVu","version":"1.0","type":"link"}