{"product_id":"mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-20-ft-8m0085957","title":"Mercury – Gen I Throttle and Shift Cable 20 Foot | Mechanical Engine Control | 8M0085957","description":"\u003ch2\u003eMercury – Gen I Throttle and Shift Cable 20 Foot | Mechanical Engine Control\u003c\/h2\u003e\n\n\u003cp\u003eThe Mercury Gen I Throttle and Shift Cable is designed for boats using traditional Mercury mechanical control systems that rely on a direct, hands-on connection from the helm to the engine. Built for legacy Gen I control interfaces, it delivers predictable throttle response and clean gear engagement without electronic involvement. The 20-foot (6.1 meter) length is a practical choice for longer console-to-engine routing, wider hull layouts, and installations where clean cable runs help maintain consistent control feel.\u003c\/p\u003e\n\n\u003cp\u003eControl cable condition directly affects throttle response, shift engagement, and low-speed handling. Routine inspection for chafing, corrosion at end fittings, tight bends, and loose securing points can help prevent stiffness and uneven movement. Proper routing and correct adjustment help preserve smooth operation, reduce internal wear, and support reliable control response over time.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMechanical Control Design – Provides direct throttle and shift operation for predictable helm response\u003c\/li\u003e\n\u003cli\u003e20-Foot Cable Length (6.1 m) – Supports longer routing runs and wider boat layouts\u003c\/li\u003e\n\u003cli\u003eGen I Control Interface – Designed for Mercury Generation I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eMarine-Grade Construction – Built to resist vibration, moisture, and everyday marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury outboards with Gen I mechanical control systems\u003c\/li\u003e\n\u003cli\u003eNon-electronic throttle and shift configurations\u003c\/li\u003e\n\u003cli\u003eLegacy Mercury control installations requiring a 20-foot Gen I throttle and shift cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControl cable requirements vary by control generation and rigging layout.\u003c\/li\u003e\n\u003cli\u003eConfirm Gen I mechanical control compatibility and correct cable length before ordering.\u003c\/li\u003e\n\u003cli\u003eProper routing—avoiding sharp bends, pinch points, and heat exposure—and correct adjustment are required for smooth movement and safe operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e1) What control systems does this cable work with?\u003c\/strong\u003e\u003cbr\u003e\nIt is designed for Mercury Generation I (Gen I) mechanical throttle and shift control systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2) What length is this cable?\u003c\/strong\u003e\u003cbr\u003e\nThis cable is 20 feet (6.1 meters) long, ideal for longer console-to-engine routing applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3) Are Gen I throttle and shift cables wear items?\u003c\/strong\u003e\u003cbr\u003e\nYes. Jackets, liners, and routing stress can degrade performance over time. Routine inspection and replacement help maintain smooth control feel.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e4) Why use an OEM Mercury Gen I control cable instead of an aftermarket replacement?\u003c\/strong\u003e\u003cbr\u003e\nMercury OEM cables are built to original specifications for cable travel, fit, and durability, helping maintain proper control geometry and consistent throttle and shift response.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e5) What should be checked during installation?\u003c\/strong\u003e\u003cbr\u003e\nVerify correct routing, avoid sharp bends or heat sources, secure the cable properly, and confirm full throttle and shift travel before operation.\u003c\/p\u003e\n","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935332159779,"sku":"8M0085957","price":44.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/8m0085942_15.png?v=1698792978","url":"https:\/\/partsvu.com\/en-ca\/products\/mercury-platinum-plus-throttle-and-shift-cable-gen-i-sae-20-ft-8m0085957","provider":"PartsVu","version":"1.0","type":"link"}