{"product_id":"mercury-remote-cntrl-15ft-8m0176287","title":"Mercury - REMOTE CNTRL 15FT - 8M0176287","description":"\u003cp data-start=\"0\" data-end=\"88\"\u003e\u003cstrong data-start=\"0\" data-end=\"88\"\u003eMercury – Side Mount Remote Control, 14-Pin | Outboard Control with Trim | 8M0176287\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-start=\"90\" data-end=\"93\"\u003e\n\u003ch3 data-start=\"95\" data-end=\"109\"\u003eOverview\u003c\/h3\u003e\n\u003cp data-start=\"110\" data-end=\"525\"\u003eThis is the side mount control Mercury started using once the 14-pin harness became standard, and it shows. Everything plugs in the way you expect it to. The trim switch sits right on the handle, which feels natural once you’re running, especially when you’re constantly bumping trim to keep the boat happy. The long harness helps too. You’re not stretching wires or coming up short halfway through the rigging job.\u003c\/p\u003e\n\u003chr data-start=\"527\" data-end=\"530\"\u003e\n\u003ch3 data-start=\"532\" data-end=\"550\"\u003eKey Features\u003c\/h3\u003e\n\u003cp data-start=\"551\" data-end=\"1021\"\u003e • \u003cstrong data-start=\"554\" data-end=\"584\"\u003eHandle-Mounted Trim Switch\u003c\/strong\u003e – Trim control stays right under your thumb while you’re running.\u003cbr data-start=\"650\" data-end=\"653\"\u003e • \u003cstrong data-start=\"656\" data-end=\"688\"\u003eFourteen-Pin Deutsch Harness\u003c\/strong\u003e – Fifteen feet of harness gives you room to route things cleanly.\u003cbr data-start=\"754\" data-end=\"757\"\u003e • \u003cstrong data-start=\"760\" data-end=\"788\"\u003eDirect Engine Connection\u003c\/strong\u003e – Plugs straight into supported engines with no adapter needed.\u003cbr data-start=\"852\" data-end=\"855\"\u003e • \u003cstrong data-start=\"858\" data-end=\"880\"\u003eGen II Cable Setup\u003c\/strong\u003e – Designed around Gen II throttle and shift cables.\u003cbr data-start=\"932\" data-end=\"935\"\u003e • \u003cstrong data-start=\"938\" data-end=\"961\"\u003eSmartCraft CAN Lead\u003c\/strong\u003e – Includes a two-pin CAN connection for SmartCraft systems.\u003c\/p\u003e\n\u003chr data-start=\"1023\" data-end=\"1026\"\u003e\n\u003ch3 data-start=\"1028\" data-end=\"1061\"\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cp data-start=\"1062\" data-end=\"1240\"\u003e • Mercury outboard engines, 2006 and newer\u003cbr data-start=\"1105\" data-end=\"1108\"\u003e • Non-DTS outboards\u003cbr data-start=\"1128\" data-end=\"1131\"\u003e • Twenty-five to three hundred horsepower range\u003cbr data-start=\"1179\" data-end=\"1182\"\u003e • Mechanical control systems\u003cbr data-start=\"1211\" data-end=\"1214\"\u003e • Gen II control series\u003c\/p\u003e\n\u003chr data-start=\"1242\" data-end=\"1245\"\u003e\n\u003ch3 data-start=\"1247\" data-end=\"1285\"\u003ePerformance \u0026amp; Practical Benefits\u003c\/h3\u003e\n\u003cp data-start=\"1286\" data-end=\"1610\"\u003eOnce it’s installed, this control just stays out of the way. Trim is easy to manage while getting on plane or slowing back down. You’re not reaching, you’re not thinking about it. The longer harness makes rigging less frustrating, especially on wider consoles. After cable adjustment, everything feels smooth and consistent.\u003c\/p\u003e\n\u003chr data-start=\"1612\" data-end=\"1615\"\u003e\n\u003ch3 data-start=\"1617\" data-end=\"1634\"\u003eWhy Buy OEM\u003c\/h3\u003e\n\u003cp data-start=\"1635\" data-end=\"1918\"\u003eOEM Mercury controls are built around Mercury wiring and cable geometry, not guesswork. Connections fit the way they should, trim response stays consistent, and SmartCraft works when it’s wired correctly. Over time, that means fewer surprises and less time chasing electrical issues.\u003c\/p\u003e\n\u003chr data-start=\"1920\" data-end=\"1923\"\u003e\n\u003ch3 data-start=\"1925\" data-end=\"1934\"\u003eFAQ\u003c\/h3\u003e\n\u003cp data-start=\"1936\" data-end=\"2123\"\u003e\u003cstrong data-start=\"1936\" data-end=\"1999\"\u003eQ1: How do I know if this control will work with my engine?\u003c\/strong\u003e\u003cbr data-start=\"1999\" data-end=\"2002\"\u003eA: If your Mercury outboard is 2006 or newer, non-DTS, and uses a fourteen-pin connector, this control plugs in directly.\u003c\/p\u003e\n\u003cp data-start=\"2125\" data-end=\"2215\"\u003e\u003cstrong data-start=\"2125\" data-end=\"2162\"\u003eQ2: Do I need an adapter harness?\u003c\/strong\u003e\u003cbr data-start=\"2162\" data-end=\"2165\"\u003eA: No, it connects directly to compatible engines.\u003c\/p\u003e\n\u003cp data-start=\"2217\" data-end=\"2315\"\u003e\u003cstrong data-start=\"2217\" data-end=\"2263\"\u003eQ3: What cables does this control require?\u003c\/strong\u003e\u003cbr data-start=\"2263\" data-end=\"2266\"\u003eA: Gen II throttle and shift cables are required.\u003c\/p\u003e\n\u003cp data-start=\"2317\" data-end=\"2425\"\u003e\u003cstrong data-start=\"2317\" data-end=\"2354\"\u003eQ4: Does this support SmartCraft?\u003c\/strong\u003e\u003cbr data-start=\"2354\" data-end=\"2357\"\u003eA: Yes, it includes a two-pin CAN connection for SmartCraft systems.\u003c\/p\u003e\n\u003cp data-start=\"2427\" data-end=\"2567\"\u003e\u003cstrong data-start=\"2427\" data-end=\"2484\"\u003eQ5: Is anything else required for SmartCraft to work?\u003c\/strong\u003e\u003cbr data-start=\"2484\" data-end=\"2487\"\u003eA: Yes, a two-pin resistor, part number 893388A01, must be purchased separately.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935154164003,"sku":"8M0176287","price":580.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/asfdfdfsdf.jpg?v=1698792217","url":"https:\/\/partsvu.com\/en-ca\/products\/mercury-remote-cntrl-15ft-8m0176287","provider":"PartsVu","version":"1.0","type":"link"}