{"product_id":"mercury-remote-cntrl-20ft-8m0176288","title":"Mercury – Side Mount Remote Control, 14-Pin | Outboard Control with Trim | 8M0176288","description":"\u003cp data-start=\"0\" data-end=\"88\"\u003e\u003cstrong data-start=\"0\" data-end=\"88\"\u003eMercury – Side Mount Remote Control, 14-Pin | Outboard Control with Trim | 8M0176288\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-start=\"90\" data-end=\"93\"\u003e\n\u003ch3 data-start=\"95\" data-end=\"109\"\u003eOverview\u003c\/h3\u003e\n\u003cp data-start=\"110\" data-end=\"570\"\u003eThis is the side mount control you grab when the boat layout isn’t doing you any favors. The console’s a little farther forward, the rigging run isn’t straight, and suddenly a short harness just won’t reach without getting creative. This one gives you twenty feet to work with, which usually solves that problem right away. Trim is right on the handle, where your thumb already lives, and on the right engines it plugs straight in. No adapters. No extra steps.\u003c\/p\u003e\n\u003chr data-start=\"572\" data-end=\"575\"\u003e\n\u003ch3 data-start=\"577\" data-end=\"595\"\u003eKey Features\u003c\/h3\u003e\n\u003cp data-start=\"596\" data-end=\"1054\"\u003e • \u003cstrong data-start=\"599\" data-end=\"629\"\u003eHandle-Mounted Trim Switch\u003c\/strong\u003e – Easy trim control without reaching or shifting your grip.\u003cbr data-start=\"689\" data-end=\"692\"\u003e • \u003cstrong data-start=\"695\" data-end=\"718\"\u003eTwenty-Foot Harness\u003c\/strong\u003e – Extra length for boats with longer or awkward rigging runs.\u003cbr data-start=\"780\" data-end=\"783\"\u003e • \u003cstrong data-start=\"786\" data-end=\"814\"\u003e14-Pin Deutsch Connector\u003c\/strong\u003e – Direct plug-in to supported engines, no adapter needed.\u003cbr data-start=\"872\" data-end=\"875\"\u003e • \u003cstrong data-start=\"878\" data-end=\"906\"\u003eGen II Cable Requirement\u003c\/strong\u003e – Designed to be used with Gen II throttle and shift cables.\u003cbr data-start=\"967\" data-end=\"970\"\u003e • \u003cstrong data-start=\"973\" data-end=\"996\"\u003eSmartCraft CAN Lead\u003c\/strong\u003e – Built-in two-pin CAN connection for SmartCraft systems.\u003c\/p\u003e\n\u003chr data-start=\"1056\" data-end=\"1059\"\u003e\n\u003ch3 data-start=\"1061\" data-end=\"1094\"\u003eEngine \u0026amp; Boat Compatibility\u003c\/h3\u003e\n\u003cp data-start=\"1095\" data-end=\"1273\"\u003e • Mercury outboard engines, 2006 and newer\u003cbr data-start=\"1138\" data-end=\"1141\"\u003e • Non-DTS outboards\u003cbr data-start=\"1161\" data-end=\"1164\"\u003e • Twenty-five to three hundred horsepower range\u003cbr data-start=\"1212\" data-end=\"1215\"\u003e • Mechanical control systems\u003cbr data-start=\"1244\" data-end=\"1247\"\u003e • Gen II control series\u003c\/p\u003e\n\u003chr data-start=\"1275\" data-end=\"1278\"\u003e\n\u003ch3 data-start=\"1280\" data-end=\"1318\"\u003ePerformance \u0026amp; Practical Benefits\u003c\/h3\u003e\n\u003cp data-start=\"1319\" data-end=\"1668\"\u003eOnce it’s installed, you stop thinking about the control—and that’s a good thing. Trim changes are quick while you’re getting on plane or backing down in rough water. The longer harness makes rigging calmer and cleaner, especially on center consoles where nothing is close together. Set the cables, take it for a run, and it feels the way it should.\u003c\/p\u003e\n\u003chr data-start=\"1670\" data-end=\"1673\"\u003e\n\u003ch3 data-start=\"1675\" data-end=\"1692\"\u003eWhy Buy OEM\u003c\/h3\u003e\n\u003cp data-start=\"1693\" data-end=\"1990\"\u003eOEM Mercury controls are built to work with Mercury wiring and cable geometry, not “close enough” parts. Everything fits. Everything talks the way it’s supposed to. SmartCraft behaves when it’s wired correctly, and you’re not chasing electrical gremlins later. For most boats, OEM just saves time.\u003c\/p\u003e\n\u003chr data-start=\"1992\" data-end=\"1995\"\u003e\n\u003ch3 data-start=\"1997\" data-end=\"2006\"\u003eFAQ\u003c\/h3\u003e\n\u003cp data-start=\"2008\" data-end=\"2192\"\u003e\u003cstrong data-start=\"2008\" data-end=\"2068\"\u003eQ1: How do I know this control will work with my engine?\u003c\/strong\u003e\u003cbr data-start=\"2068\" data-end=\"2071\"\u003eA: If your Mercury outboard is 2006 or newer, non-DTS, and uses a fourteen-pin connector, this control plugs in directly.\u003c\/p\u003e\n\u003cp data-start=\"2194\" data-end=\"2284\"\u003e\u003cstrong data-start=\"2194\" data-end=\"2231\"\u003eQ2: Do I need an adapter harness?\u003c\/strong\u003e\u003cbr data-start=\"2231\" data-end=\"2234\"\u003eA: No, it connects straight to compatible engines.\u003c\/p\u003e\n\u003cp data-start=\"2286\" data-end=\"2386\"\u003e\u003cstrong data-start=\"2286\" data-end=\"2347\"\u003eQ3: What throttle and shift cables does this control use?\u003c\/strong\u003e\u003cbr data-start=\"2347\" data-end=\"2350\"\u003eA: Gen II throttle and shift cables.\u003c\/p\u003e\n\u003cp data-start=\"2388\" data-end=\"2488\"\u003e\u003cstrong data-start=\"2388\" data-end=\"2425\"\u003eQ4: Does this support SmartCraft?\u003c\/strong\u003e\u003cbr data-start=\"2425\" data-end=\"2428\"\u003eA: Yes, it includes a two-pin CAN connection for SmartCraft.\u003c\/p\u003e\n\u003cp data-start=\"2490\" data-end=\"2628\"\u003e\u003cstrong data-start=\"2490\" data-end=\"2545\"\u003eQ5: Is anything else needed for SmartCraft to work?\u003c\/strong\u003e\u003cbr data-start=\"2545\" data-end=\"2548\"\u003eA: Yes, a two-pin resistor, part number 893388A01, must be purchased separately.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46935154098467,"sku":"8M0176288","price":580.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/PV799390.jpg?v=1720534766","url":"https:\/\/partsvu.com\/en-ca\/products\/mercury-remote-cntrl-20ft-8m0176288","provider":"PartsVu","version":"1.0","type":"link"}