{"product_id":"mercury-water-pressure-pick-up-fitting-90-degree-fits-2-5xs-2-5l-dfi-22-891533","title":"Mercury – 90° Fitting | Pressure Port Elbow | 22-891533","description":"\u003cp data-start=\"0\" data-end=\"59\"\u003e\u003cstrong data-start=\"0\" data-end=\"59\"\u003eMercury – 90° Fitting | Pressure Port Elbow | 22-891533\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-start=\"61\" data-end=\"64\"\u003e\n\u003cp data-start=\"66\" data-end=\"488\"\u003e\u003cstrong data-start=\"66\" data-end=\"78\"\u003eOverview\u003c\/strong\u003e\u003cbr data-start=\"78\" data-end=\"81\"\u003eThis 90-degree fitting is the small elbow used on pressure-sensor setups for certain 2.5XS 2.5L DFI engines. It lets the hose or sensor make a clean turn off the block without getting pinched or forced into a bad angle. On the water, it helps keep the pressure connection tight so your readings stay steady and predictable. It’s a simple part, but on these engines, it’s the one that makes the routing work.\u003c\/p\u003e\n\u003chr data-start=\"490\" data-end=\"493\"\u003e\n\u003cp data-start=\"495\" data-end=\"964\"\u003e\u003cstrong data-start=\"495\" data-end=\"511\"\u003eKey Features\u003c\/strong\u003e\u003cbr data-start=\"511\" data-end=\"514\"\u003e    • \u003cstrong data-start=\"540\" data-end=\"553\"\u003e90° Elbow\u003c\/strong\u003e – Gives the hose a clean bend in tight spots.\u003cbr data-start=\"599\" data-end=\"602\"\u003e    • \u003cstrong data-start=\"628\" data-end=\"646\"\u003eOEM Thread Fit\u003c\/strong\u003e – Matches Mercury’s block port correctly.\u003cbr data-start=\"688\" data-end=\"691\"\u003e    • \u003cstrong data-start=\"717\" data-end=\"738\"\u003eGood Seal Surface\u003c\/strong\u003e – Helps prevent leaks at the pressure port.\u003cbr data-start=\"782\" data-end=\"785\"\u003e    • \u003cstrong data-start=\"811\" data-end=\"833\"\u003eMarine-Ready Metal\u003c\/strong\u003e – Handles vibration, spray, and heat.\u003cbr data-start=\"871\" data-end=\"874\"\u003e    • \u003cstrong data-start=\"900\" data-end=\"924\"\u003eSensor Kit Component\u003c\/strong\u003e – Used in Mercury pressure-sensor kits.\u003c\/p\u003e\n\u003chr data-start=\"966\" data-end=\"969\"\u003e\n\u003cp data-start=\"971\" data-end=\"1223\"\u003e\u003cstrong data-start=\"971\" data-end=\"1002\"\u003eEngine \u0026amp; Boat Compatibility\u003c\/strong\u003e\u003cbr data-start=\"1002\" data-end=\"1005\"\u003e    • 2.5XS 2.5L DFI\u003cbr data-start=\"1045\" data-end=\"1048\"\u003e    • Serial: 0T997974–1E000796\u003cbr data-start=\"1099\" data-end=\"1102\"\u003e    • Block pressure-port fittings\u003cbr data-start=\"1156\" data-end=\"1159\"\u003e    • Water-pressure or sensor-based systems\u003c\/p\u003e\n\u003chr data-start=\"1225\" data-end=\"1228\"\u003e\n\u003cp data-start=\"1230\" data-end=\"1565\"\u003e\u003cstrong data-start=\"1230\" data-end=\"1266\"\u003ePerformance \u0026amp; Practical Benefits\u003c\/strong\u003e\u003cbr data-start=\"1266\" data-end=\"1269\"\u003eThis elbow keeps the hose or sensor from fighting the space around the block. It reduces strain, stays tight when the engine vibrates, and helps the gauge or sensor hold a steady reading. If the old elbow is leaking or corroded, swapping in a new one usually clears up pressure issues right away.\u003c\/p\u003e\n\u003chr data-start=\"1567\" data-end=\"1570\"\u003e\n\u003cp data-start=\"1572\" data-end=\"1849\"\u003e\u003cstrong data-start=\"1572\" data-end=\"1587\"\u003eWhy Buy OEM\u003c\/strong\u003e\u003cbr data-start=\"1587\" data-end=\"1590\"\u003eOEM elbows fit the port correctly and don’t loosen or leak as easily as generic versions. They’re built for the exact seat depth and thread style used on these engines. Most boaters stick with OEM because a poor seal at the block turns into bad readings fast.\u003c\/p\u003e\n\u003chr data-start=\"1851\" data-end=\"1854\"\u003e\n\u003cp data-start=\"1856\" data-end=\"2008\"\u003e\u003cstrong data-start=\"1856\" data-end=\"1863\"\u003eFAQ\u003c\/strong\u003e\u003cbr data-start=\"1863\" data-end=\"1866\"\u003e\u003cstrong data-start=\"1866\" data-end=\"1913\"\u003e1. How do I know this is the right fitting?\u003c\/strong\u003e\u003cbr data-start=\"1913\" data-end=\"1916\"\u003eIf you’re working on a 2.5XS 2.5L DFI in the listed serial range, this is the correct elbow.\u003c\/p\u003e\n\u003cp data-start=\"2010\" data-end=\"2116\"\u003e\u003cstrong data-start=\"2010\" data-end=\"2035\"\u003e2. Do I need sealant?\u003c\/strong\u003e\u003cbr data-start=\"2035\" data-end=\"2038\"\u003eA small amount of Mercury-approved sealant is fine if your setup calls for it.\u003c\/p\u003e\n\u003cp data-start=\"2118\" data-end=\"2205\"\u003e\u003cstrong data-start=\"2118\" data-end=\"2145\"\u003e3. What causes failure?\u003c\/strong\u003e\u003cbr data-start=\"2145\" data-end=\"2148\"\u003eCorrosion, overtightening, or age are the usual culprits.\u003c\/p\u003e\n\u003cp data-start=\"2207\" data-end=\"2320\"\u003e\u003cstrong data-start=\"2207\" data-end=\"2250\"\u003e4. Anything to check before installing?\u003c\/strong\u003e\u003cbr data-start=\"2250\" data-end=\"2253\"\u003eMake sure the port surface is clean and the elbow threads smoothly.\u003c\/p\u003e\n\u003cp data-start=\"2322\" data-end=\"2458\"\u003e\u003cstrong data-start=\"2322\" data-end=\"2367\"\u003e5. What does a bad elbow do on the water?\u003c\/strong\u003e\u003cbr data-start=\"2367\" data-end=\"2370\"\u003eYou’ll see low or inconsistent pressure readings, or notice moisture around the fitting.\u003c\/p\u003e","brand":"Mercury","offers":[{"title":"Default Title","offer_id":46941085368611,"sku":"22-891533","price":16.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7410\/9475\/files\/891533.png?v=1698816154","url":"https:\/\/partsvu.com\/en-ca\/products\/mercury-water-pressure-pick-up-fitting-90-degree-fits-2-5xs-2-5l-dfi-22-891533","provider":"PartsVu","version":"1.0","type":"link"}