#EngineSetup-SingleEngine
Yamaha Command Link Plus Single Engine Main Station Switch | 6X6-82570-33-00
The Yamaha Command Link Plus Single Engine Main Station Switch 6X6-82570-33-00 is made for primary helm control on compatible single-engine Command Link Plus installations. It gives the main station a factory-style start and stop switch layout that matches Yamaha digital rigging systems. This switch is a strong option for completing a new helm build or refreshing a damaged main station assembly.
Key Features
-
Command Link Plus Main Station Switch: Designed for Yamaha Command Link Plus single-engine helm setups.
-
Three-Position Switch Design: Provides familiar key-switch operation for main station control.
-
Conventional Key Switch Connector: The single-engine Command Link Plus switch uses the conventional key switch connector.
-
Ergonomic Yamaha Key Design: Uses Yamaha's updated key style for a clean, modern helm feel.
-
Main Station Application: Intended for primary helm operation in compatible single-engine systems.
Installation Note
Installation should be completed with the battery disconnected and wiring matched to the correct Yamaha Command Link Plus configuration. Because Command Link Plus systems can involve station transfer, start/stop panels, and networked controls, installation or inspection by a qualified Yamaha marine technician is recommended.
Superseded Yamaha Part Numbers
Yamaha 6X6-82570-33-00 has been superseded by 6X6-82570-34-00.
FAQs
Q1: Is this switch kit for the main helm station?
A1: Yes. This item is intended for main station use on compatible Yamaha applications, unless your existing installation or Yamaha parts reference says otherwise.
Q2: How should I confirm this is the correct Yamaha part?
A2: Match the part number to your current switch, panel, or Yamaha rigging reference, and confirm your engine count, station setup, and connector style before ordering.
Q3: Can I install this switch panel myself?
A3: Marine electrical work should be done with battery power disconnected and wiring matched correctly. If you are not sure about the rigging layout, have a qualified marine technician install or inspect it.
Q4: Is this part number superseded?
A4: Yamaha 6X6-82570-33-00 has been superseded by 6X6-82570-34-00.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
#EngineSetup-TwinEngines
Yamaha Command Link Plus Twin Engines Main Station Switch Kit | 6X6-W0035-50-00
The Yamaha Command Link Plus Twin Engines Main Station Switch Kit 6X6-W0035-50-00 is designed for the primary helm on compatible twin-engine Command Link Plus boats. It provides a dedicated main station switch kit for managing two Yamaha outboards from one organized control location. This kit works well for repowers, dash rebuilds, or new twin-engine installations that need a factory-style Yamaha switching setup.
Key Features
-
Twin Engine Main Station Kit: Energizes the ignition system for two Yamaha outboards from one main station layout.
-
One-Key Convenience: Designed to simplify multi-engine ignition control with a single-key main switch setup.
-
Start/Stop Panel Included: Pairs the main switch panel with a twin start/stop panel for organized operation.
-
All Start Ready: Can be paired with an optional All Start switch for added convenience.
-
Command Link Plus Integration: Built for compatible Yamaha Command Link Plus multi-engine rigs.
What’s Included
- Yamaha key switch panel with safety lanyard connection
- Yamaha start/stop switch panel
- Port and starboard start/stop buttons
- Pre-wired panel assemblies as shown
Installation Note
Installation should be completed with the battery disconnected and wiring matched to the correct Yamaha Command Link Plus configuration. Because Command Link Plus systems can involve station transfer, start/stop panels, and networked controls, installation or inspection by a qualified Yamaha marine technician is recommended.
FAQs
Q1: Is this switch kit for the main helm station?
A1: Yes. This item is intended for main station use on compatible Yamaha applications, unless your existing installation or Yamaha parts reference says otherwise.
Q2: How should I confirm this is the correct Yamaha part?
A2: Match the part number to your current switch, panel, or Yamaha rigging reference, and confirm your engine count, station setup, and connector style before ordering.
Q3: Can I install this switch panel myself?
A3: Marine electrical work should be done with battery power disconnected and wiring matched correctly. If you are not sure about the rigging layout, have a qualified marine technician install or inspect it.
Q4: Does this kit include multiple switch components?
A4: Yes. This kit includes the listed Yamaha switch components provided for the matching station and engine configuration.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
#EngineSetup-TripleEngines
Yamaha Triple Engine Start Switch Kit - Main Station | 6X6-762B0-11-00
The Yamaha Triple Engine Start Switch Kit 6X6-762B0-11-00 is built for main station control on compatible triple-engine Yamaha applications. It gives the primary helm a dedicated switch kit for managing three outboards in a clean, operator-friendly layout. This is a helpful component for larger offshore boats, repowers, and dash rebuilds that need organized Yamaha start control.
Key Features
-
Triple Engine Main Station Kit: Supports organized start switch control for three Yamaha outboards at the main helm.
-
Main Station Application: Built for primary station installations on compatible triple-engine rigs.
-
OEM Yamaha Switch Hardware: Designed to fit Yamaha rigging and control system requirements.
-
Multi-Engine Start Control: Keeps triple-engine start functions grouped and easy to operate.
-
Service Replacement Option: A useful update or replacement for older triple-engine switch kit setups.
Installation Note
Disconnect battery power before installation and verify the switch, harness, station layout, and engine configuration before connecting the part. For best results, have the installation completed or inspected by a qualified marine technician.
Superseded Yamaha Part Numbers
Supersedes Yamaha 6X6-762B0-10-00.
FAQs
Q1: Is this switch kit for the main helm station?
A1: Yes. This item is intended for main station use on compatible Yamaha applications, unless your existing installation or Yamaha parts reference says otherwise.
Q2: How should I confirm this is the correct Yamaha part?
A2: Match the part number to your current switch, panel, or Yamaha rigging reference, and confirm your engine count, station setup, and connector style before ordering.
Q3: Can I install this switch panel myself?
A3: Marine electrical work should be done with battery power disconnected and wiring matched correctly. If you are not sure about the rigging layout, have a qualified marine technician install or inspect it.
Q4: Is this part number superseded?
A4: Supersedes Yamaha 6X6-762B0-10-00.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
#EngineSetup-QuadEngines
Yamaha Command Link Quad Engines Main Station Switch Kit | MAR-QUAD1-KT-00
The Yamaha Command Link Quad Engines Main Station Switch Kit MAR-QUAD1-KT-00 is built for main helm installations running four compatible Yamaha outboards. It helps centralize quad-engine start and stop control in a factory-style switch kit made for Command Link Plus rigging. This setup is a clean choice for new quad-engine builds, repowers, or helm updates that need organized Yamaha control hardware.
Key Features
-
Quad-Engine Main Station Kit: Brings main helm ignition control together for four Yamaha outboards.
-
Keyed-Alike Switch Set: Four keyed-alike switches help simplify operation at the primary station.
-
Command Link Plus Design: Uses Yamaha Command Link Plus panel technology for modern multi-engine rigging.
-
Harnessing Included: Includes key switch and stop switch harnessing to support the main station install.
-
Factory-Style Helm Finish: Creates a clean Yamaha-matched switch layout for large multi-outboard boats.
What’s Included
- Yamaha multi-engine key switch panel components
- Yamaha emergency stop switch panels with safety lanyard connections
- Ignition and shutoff panel assemblies as shown
- Pre-attached wiring where shown in product image
Installation Note
Installation should be completed with the battery disconnected and wiring matched to the correct Yamaha Command Link configuration. For second-station or multi-engine applications, verify the station layout and control system before connecting the panel.
FAQs
Q1: Is this switch kit for the main helm station?
A1: Yes. This item is intended for main station use on compatible Yamaha applications, unless your existing installation or Yamaha parts reference says otherwise.
Q2: How should I confirm this is the correct Yamaha part?
A2: Match the part number to your current switch, panel, or Yamaha rigging reference, and confirm your engine count, station setup, and connector style before ordering.
Q3: Can I install this switch panel myself?
A3: Marine electrical work should be done with battery power disconnected and wiring matched correctly. If you are not sure about the rigging layout, have a qualified marine technician install or inspect it.
Q4: Does this kit include multiple switch components?
A4: Yes. This kit includes the listed Yamaha switch components provided for the matching station and engine configuration.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
