Minn Kota | Raptor/Talon Bluetooth Stomp Switch | 1810253

Product Overview

The Minn Kota | Raptor/Talon Bluetooth Stomp Switch | 1810253 is an ultra-rugged, low-profile marine control accessory designed to provide fast-acting, hands-free anchor deployment for modern shallow water anchoring networks. Operating on an advanced, encrypted Bluetooth wireless frequency, this dual-switch stomp kit allows anglers to instantly stow or deploy their shallow water anchors by simply stepping on the large, heavy-duty circular pads located at the bow of the vessel. For tournament bass fishermen and flats guides, holding your position precisely when coming across a school of fish is critical; stopping to look down and press tiny buttons on a handheld remote can disrupt your casting rhythm. The 1810253 solves this challenge completely by presenting an intuitive, high-impact "stomp" interface that can be triggered blindly with your boot while your eyes remain completely focused on the fish.

Molded from high-yield, UV-stabilized impact composite compounds, this stomp switch features a low-profile, smooth dome shape that integrates cleanly onto any fiberglass or carpeted boat deck without creating a significant obstruction or tripping hazard. The kit consists of two completely independent wireless control pads: one dedicated exclusively to dropping the anchor down (Deploy) and one dedicated to lifting it home (Stow). Both pads feature an IP67 completely waterproof and dustproof internal encapsulation, ensuring that heavy rain, morning dew, salt crust, and constant pressure from heavy muddy boots will not compromise the internal circuitry. Powered by easily replaceable lithium coin-cell batteries, this wireless stomp switch system eliminates messy under-deck routing lines and gives you total command of your anchoring fleet right from your casting position.

Key Features

• Intuitive Large Stomp Interface: Large, circular domed buttons allow for immediate, blind operation using simple boot pressure, keeping your hands completely free to fish.
• Dual-Pad Modular Configuration: Includes two separate, independent wireless pods—one dedicated to automatic deployment and one for rapid retraction, allowing for flexible positioning on the deck.
• Cross-Platform Universal Connectivity: Powered by dual-compatibility firmware that links seamlessly with Bluetooth-enabled Minn Kota Raptor (hydraulic) and Minn Kota Talon (electric) anchor lines.
• IP67 Fully Waterproof Assembly: Completely sealed and potted internal circuits prevent moisture damage from heavy rainstorms, deck splashing, and damp storage locks.
• Secure Bluetooth Wireless Tracking: Delivers high-speed signal transmissions directly to your anchor pump, preventing lag and blocking out ambient radio frequency interference.
• Low-Profile Non-Trip Profile: Features a smooth, sloped perimeter shield that prevents fishing lines, nets, or bare feet from catching on the hardware.
• Ultra-Low Energy Management: Utilizes highly efficient internal lithium coin cells that provide reliable multi-season operation before requiring basic hardware replacement.

Compatibility Information

The Minn Kota 1810253 Bluetooth Stomp Switch features a highly versatile cross-platform compatibility matrix within Minn Kota's modern shallow water anchor fleet. It is fully compatible with all generations of Bluetooth-enabled Minn Kota Raptor hydraulic anchors and Bluetooth-enabled Minn Kota Talon electromechanical anchors manufactured from 2017 to 2023 and onwards.

It is vital to understand that this stomp switch relies strictly on Bluetooth communication and is completely incompatible with older legacy, non-Bluetooth Talon models (characterized by silver or early colored tower chassis), which utilize alternative proprietary radio frequencies. This switch controls single or dual-synchronized anchor configurations up to 15 feet in depth. It can be mounted flat onto any carpet, vinyl, marine starboard, or fiberglass bow surface using the provided stainless steel mounting fasteners.

Frequently Asked Questions

What is the physical installation process for attaching these stomp switches to my deck?

Installation of the 1810253 stomp switch kit is incredibly simple and clean because the modules are completely wireless. First, select a flat, comfortable section on your bow casting deck where you can naturally reach the pads with your foot while fishing. Position the "Stow" and "Deploy" pads a few inches apart based on your ergonomic preference. Mark the three outer screw hole locations for each pad, pre-drill small pilot holes through your carpet or fiberglass deck to prevent gelcoat cracking, apply a drop of marine silicone sealant into the holes to keep them waterproof, and fasten the modules down flush using the included marine-grade stainless steel screws.

Can these stomp switches control a dual anchor setup, or do I need to buy two independent kits?

A single Minn Kota 1810253 stomp switch kit is fully capable of controlling a dual shallow water anchor setup (such as twin Raptors or twin Talons mounted on both sides of your transom). During the initial Bluetooth programming sequence, you will pair the stomp switches to your primary anchor. If your anchors are already configured in the system as a synchronized dual-anchor pair, the motor control boards will share the signal instantly. Stepping on the deploy pad will cause both transom anchors to run down in perfect unison, eliminating the need to purchase separate controller hardware for the port and starboard lines.

How long do the internal batteries last, and what type of replacement cells do they require?

The 1810253 stomp pads are powered internally by standard, long-lasting CR2032 lithium coin-cell batteries (pre-installed in the kit). Because the internal Bluetooth microprocessors are calibrated for extreme power conservation, the switches remain in an inert, low-draw sleep mode until the pad is physically compressed. Under normal tournament or recreational fishing frequencies, a fresh set of high-quality batteries will easily power the stomp switches for two to three full seasons. To replace them, simply unscrew the top composite retaining cover, lift out the sealed module, swap the coin cell on the bottom, and reassemble.

Yes, the internal electronic core of each stomp pad is completely encased in a specialized potting compound that carries a certified IP67 waterproof and dustproof rating, meaning they are built to survive heavy environmental spray and regular boat cleaning. It is perfectly safe to wash down your boat deck with a standard garden hose or low-pressure marine washdown kit over the switches to clear away dried lake mud, sand, and fish slime. However, avoid blasting the edge seals directly with commercial-grade high-pressure commercial pressure washers at close range, as extreme pressure could tear the protective rubber membrane.

Can I pair this stomp switch kit to my Minn Kota trolling motor to control its Spot-Lock feature?

No, the Minn Kota 1810253 Stomp Switch is a dedicated anchor accessory and cannot be paired with or used to control Minn Kota trolling motor navigation features like steering, speed control, or Spot-Lock electronic anchoring. The firmware inside this switch is mapped specifically to communicate with the receiver boards inside Raptor hydraulic pumps or Talon electronic towers to manage physical vertical stabilization. If you require foot-based control over your trolling motor's Spot-Lock anchor, you must utilize a compatible corded mechanical foot pedal or the wireless Minn Kota Bluetooth Bluetooth Foot Pedal accessory.