Honda OEM Propeller 13 x 21 - 58130-ZW1-V13

Shop Honda OEM Propeller 58130-ZW1-V13, a 13 x 21 Honda outboard propeller for compatible Honda marine applications.

Honda outboard propellers should be selected by part number, diameter, pitch, engine horsepower, gearcase, and boat setup. A propeller that looks similar may not perform correctly if the pitch, diameter, hub style, or application does not match your Honda outboard.

Honda 58130-ZW1-V13 is an OEM Honda outboard propeller part number. The safest way to confirm fitment is to match the full part number, propeller size, and Honda outboard model information before purchasing.

Product Details

• Product name: Honda OEM Propeller 13 x 21
• OEM part number: 58130-ZW1-V13
• Product type: Honda outboard propeller
• Propeller size: 13 x 21
• Brand: Honda
• Application: Compatible Honda outboard applications where 58130-ZW1-V13 is specified
• Search variants: Honda outboard propeller 58130, Honda propeller 58130-ZW1-V13, 58130 ZW1 V13, Honda 13 x 21 propeller

What Honda 58130-ZW1-V13 Means

Honda 58130-ZW1-V13 is the OEM part number for this Honda outboard propeller. The “13 x 21” size refers to the propeller’s diameter and pitch.

In simple terms:

• 13 refers to the propeller diameter.
• 21 refers to the propeller pitch.
• 58130-ZW1-V13 is the Honda OEM part number.
• Honda OEM propeller means the propeller is designed for Honda outboard applications where this part number is specified.

Propeller pitch and diameter affect acceleration, engine RPM, handling, fuel economy, and top-end performance. That is why it is important to match the correct Honda propeller to your engine and boat.

Why Choose a Honda OEM Propeller?

A Honda OEM propeller is designed to meet Honda’s specifications for compatible outboard applications. Using the correct OEM propeller helps support proper performance, fitment, and engine operating range.

Honda OEM propellers are commonly preferred because they are:

• Built for compatible Honda outboard applications
• Easier to confirm by OEM part number
• Designed around Honda fitment requirements
• Useful for restoring original-style performance
• Matched by diameter, pitch, and part number
• Better than guessing by appearance alone
• Helpful for maintaining correct wide-open throttle RPM range

For best results, compare the new propeller with your existing propeller and confirm the full OEM part number before ordering.

How to Confirm This Honda Propeller Fits

Confirm fitment before ordering Honda Propeller 58130-ZW1-V13. Propeller fitment depends on the engine, gearcase, propeller size, hub style, and intended boat performance.

Before buying, check:

• Honda outboard model
• Engine horsepower
• Existing propeller part number
• Current propeller diameter and pitch
• Gearcase size
• Shaft and hub compatibility
• Recommended wide-open throttle RPM range
• Boat type and load
• Whether related propeller hardware is also needed

If your current propeller is damaged but still readable, check the stamped part number or size markings before replacing it.

When to Replace a Honda Outboard Propeller

Replace a Honda outboard propeller when it is damaged, bent, cracked, heavily worn, or no longer performing correctly. Even small propeller damage can affect vibration, acceleration, fuel use, and engine RPM.

Common signs that a propeller should be inspected or replaced include:

• Bent or chipped blades
• Cracks in the propeller
• Excess vibration
• Poor acceleration
• Loss of top speed
• Engine over-revving
• Engine failing to reach recommended RPM
• Cavitation or ventilation issues
• Damage from impact with rocks, sand, or debris
• Hub slipping or propeller hardware wear

A damaged propeller can place extra strain on the engine and lower unit, so it should be inspected and replaced when needed.

Honda Propeller Size and Performance

The 13 x 21 size means this propeller has a 13-inch diameter and 21-inch pitch. Pitch is the theoretical distance the propeller moves forward in one revolution under ideal conditions.

A higher-pitch propeller can support higher top-end speed on the right setup, but it may reduce acceleration if the engine cannot reach the correct RPM. A lower-pitch propeller may improve acceleration and load-carrying ability but can reduce top-end speed.

When comparing Honda propellers, consider:

• Current engine RPM at wide-open throttle
• Boat weight
• Typical passenger and gear load
• Towing or fishing use
• Offshore or inshore conditions
• Desired acceleration
• Desired top-end speed
• Current propeller performance

The goal is to keep the engine operating within Honda’s recommended RPM range.

What to Order With a Honda Outboard Propeller

When replacing a Honda outboard propeller, inspect the propeller hardware and related parts before reinstalling.

Related parts to verify in the diagram include:

• Propeller nut
• Thrust washer
• Spacer
• Cotter pin
• Propeller hub components
• Marine grease
• Propeller wrench
• Replacement hardware kit
• Lower-unit gear lube, if service is due

Replacing worn hardware at the same time can help prevent installation issues and future propeller problems.

Basic Honda Propeller Replacement Steps

Always follow the service guidance for your Honda outboard. In general, replacing a propeller involves removing the old propeller, inspecting the shaft and hardware, greasing the shaft, and installing the new propeller with the correct hardware.

Basic process:

1. Turn off the engine and remove the safety lanyard.
2. Shift the engine into neutral.
3. Remove the cotter pin or locking hardware.
4. Remove the propeller nut.
5. Slide the old propeller off the shaft.
6. Inspect the prop shaft for fishing line, corrosion, or damage.
7. Clean and lightly grease the prop shaft.
8. Install the correct thrust washer and propeller.
9. Reinstall the spacer, washer, nut, and locking hardware.
10. Tighten according to Honda service guidance.
11. Confirm the propeller spins freely and is securely installed.

Do not reuse damaged cotter pins, heavily corroded nuts, or worn propeller hardware.

Frequently Asked Questions About Honda Propeller 58130-ZW1-V13

What is Honda 58130-ZW1-V13?

Honda 58130-ZW1-V13 is an OEM Honda outboard propeller part number. This product is a 13 x 21 Honda propeller for compatible Honda outboard applications where this part number is specified.

What does 13 x 21 mean on this Honda propeller?

The 13 x 21 size means the propeller has a 13-inch diameter and a 21-inch pitch. Pitch affects acceleration, RPM, load handling, and top-end performance.

How do I know if Honda 58130-ZW1-V13 fits my outboard?

Confirm fitment by checking your Honda outboard model, horsepower, current propeller size, gearcase, hub style, and OEM part number. If your parts diagram or existing propeller lists 58130-ZW1-V13, this is the correct product to review.

Is this a Honda OEM propeller?

Yes, 58130-ZW1-V13 is a Honda OEM propeller part number. Always match the full part number and propeller size before ordering.

Can I choose a Honda propeller by diameter and pitch only?

No, diameter and pitch are important, but they are not the only fitment factors. You should also confirm the Honda part number, engine model, gearcase, hub style, and recommended RPM range.

When should I replace my Honda outboard propeller?

Replace your Honda outboard propeller if the blades are bent, chipped, cracked, worn, or causing vibration, poor acceleration, RPM issues, or reduced performance.

What hardware do I need with a Honda outboard propeller?

Inspect the existing thrust washer, propeller nut, spacer, cotter pin, hub components, and propeller shaft before reinstalling the propeller. Replace separate hardware only when the product details, parts diagram, or service procedure calls for it.

Why is the Honda propeller part number important?

The Honda propeller part number helps confirm the correct OEM replacement. Propellers can look similar but differ in pitch, diameter, hub style, and application, so part-number matching helps prevent fitment mistakes.