Honda Water Pump Impeller Kit 06193-ZV5-040

Shop Honda Water Pump Impeller Kit 06193-ZV5-040 for compatible Honda outboard applications. This OEM Honda pump kit is used during cooling system service to help maintain proper water flow through the outboard and protect the engine from overheating.

Honda 06193-ZV5-040 is an OEM Honda water pump impeller kit part number. The safest way to confirm fitment is to match the full part number, Honda outboard model, horsepower, and serial-number range before purchasing.

Product Details

• Product name: Honda Pump Kit, Impeller
• OEM part number: 06193-ZV5-040
• Product type: Honda water pump impeller kit
• Brand: Honda
• System: Outboard cooling system
• Application: Compatible Honda outboard applications where 06193-ZV5-040 is specified
• Search variants: 06193 ZV5 040, 06193-ZV5-040, Honda impeller kit, Honda water pump kit, Honda pump kit impeller

What Honda 06193-ZV5-040 Is Used For

Honda 06193-ZV5-040 is a water pump impeller kit used to service the cooling system on compatible Honda outboards. The impeller helps move water through the engine so the outboard can maintain the proper operating temperature.

Replace this Honda impeller kit when:

• The impeller is worn or damaged
• Water flow from the telltale is weak
• The engine is running hotter than normal
• The outboard is due for scheduled water pump service
• The lower unit has been removed for maintenance
• The service manual or parts diagram lists 06193-ZV5-040
• The existing part number matches Honda 06193-ZV5-040

Because Honda water pump parts can vary by engine model and production range, part-number confirmation is important before ordering.

Why the Honda Water Pump Impeller Matters

The water pump impeller is one of the most important cooling system parts on a Honda outboard. It draws water into the cooling system and helps circulate it through the engine while the motor is running.

A worn impeller can lead to:

• Reduced cooling water flow
• Weak telltale stream
• Engine overheating
• Cooling system warnings
• Damage to related pump components
• Higher risk during long runs or hot weather
• Expensive engine repairs if ignored

Replacing the water pump impeller during scheduled service helps protect the engine and supports more reliable operation on the water.

How to Confirm This Honda Impeller Kit Fits

Confirm fitment before ordering Honda Water Pump Impeller Kit 06193-ZV5-040. Water pump kits can vary by Honda outboard model, horsepower, lower-unit design, and serial-number range.

Before buying, check:

• Honda outboard model
• Engine horsepower
• Serial number or production range
• Existing water pump or impeller part number
• Honda parts diagram
• Service manual recommendations
• Whether 06193-ZV5-040 is listed for your engine
• Whether related gaskets, plates, seals, or hardware are also needed

If your parts diagram or existing service information lists 06193-ZV5-040, this is the correct product page to review.

When to Replace a Honda Water Pump Impeller

Replace a Honda water pump impeller during scheduled cooling system service or whenever the impeller shows signs of wear, cracking, stiffness, or damage. Many boat owners inspect or replace the impeller during annual service, seasonal maintenance, or after heavy use.

Common signs of Honda impeller wear or cooling-system issues include:

• Weak or inconsistent telltale stream
• Engine running hot
• Overheat alarm
• Reduced cooling flow
• Steam or excessive heat from the engine
• Impeller vanes that are cracked, curled, or missing
• Long storage period before use
• Unknown service history
• Recent operation in sand, mud, or shallow water

If the engine overheated, inspect the full water pump assembly and related cooling parts before returning to the water.

Basic Honda Water Pump Service Process

Always follow the Honda service manual for your exact outboard model. Water pump service usually requires removing the lower unit, replacing the impeller or pump kit components, and reinstalling the lower unit correctly.

Basic process:

1. Turn off the engine and secure the boat or motor.
2. Disconnect the battery if required by the service procedure.
3. Remove the lower unit according to Honda service guidance.
4. Remove the water pump housing.
5. Inspect the old impeller, key, housing, plate, and gaskets.
6. Replace the impeller and related kit components.
7. Lubricate parts where the service manual requires it.
8. Reassemble the water pump housing.
9. Reinstall the lower unit carefully.
10. Refill or check lower-unit gear lube if needed.
11. Run the engine with proper water supply.
12. Confirm strong telltale flow and normal operating temperature.

Do not run the engine without water supply. Even brief dry running can damage a new impeller.

Honda Impeller Kit vs. Complete Water Pump Kit

Use the Honda product details and parts diagram to confirm exactly what this impeller kit contains. A complete water pump kit is a different product type and should only be referenced when that exact SKU is listed for the engine application.

The right choice depends on the condition of the pump assembly.

Use an impeller kit when:

• The housing and plate are still in good condition
• The service manual calls for this kit
• The existing issue is routine impeller wear
• The part number matches your Honda diagram

Consider a more complete water pump repair when:

• The housing is scored or damaged
• The wear plate is grooved
• Gaskets or seals are leaking
• The engine has overheated
• The pump has not been serviced in a long time
• The old impeller failed or broke apart

Frequently Asked Questions About Honda 06193-ZV5-040

What is Honda 06193-ZV5-040?

Honda 06193-ZV5-040 is an OEM Honda water pump impeller kit part number used for compatible Honda outboard cooling system service.

What does Honda Pump Kit, Impeller mean?

Honda Pump Kit, Impeller is a Honda water pump service part for compatible Honda outboard water pump maintenance. Check the product details and parts diagram for exact included components.

How do I know if 06193-ZV5-040 fits my Honda outboard?

Confirm fitment by checking your Honda outboard model, horsepower, serial number, parts diagram, and existing part number. If your diagram lists 06193-ZV5-040, this is the correct product page to review.

Is 06193-ZV5-040 an OEM Honda part number?

Yes, 06193-ZV5-040 is an OEM Honda part number for a water pump impeller kit. Always match the full part number before ordering.

When should I replace my Honda outboard impeller?

Replace your Honda outboard impeller during scheduled water pump service or if you notice weak water flow, overheating, an overheat alarm, or visible impeller wear.

Can I run my Honda outboard without water to test the impeller?

No, do not run a Honda outboard without proper water supply. Running the engine dry can quickly damage the impeller and cooling system.

What are signs of a bad Honda water pump impeller?

Signs of a bad Honda water pump impeller include weak telltale flow, engine overheating, inconsistent cooling water output, cracked impeller vanes, or an overheat alarm.

Should I replace the full water pump kit or only the impeller?

Replace only the impeller if the housing, plate, gaskets, and seals are in good condition and the service procedure allows it. Replace more components if there is scoring, leaking, overheating damage, or long service history.