Minn Kota | Raptor Jack Plate Adapter Bracket | 6" | Starboard Side | White | 1810367

Product Overview

The Minn Kota | Raptor Jack Plate Adapter Bracket | 6" | Starboard Side | White | 1810367 is a premium, coastal-grade marine mounting system engineered to provide an incredibly secure, uncompromised connection between your vessel's jack plate and a Minn Kota Raptor shallow water anchor. Tailored specifically for saltwater center consoles, high-end bay boats, coastal flats skiffs, and white fiberglass hulls, this adapter bracket completely eliminates the hazardous requirement of drilling mounting holes below the waterline on your boat's transom. Instead, the system fastens cleanly into the pre-drilled side tracking channels of your manual or hydraulic jack plate, preserving your hull's structural integrity and long-term resale value. The bracket delivers an aggressive 6-inch setback clearance, positioning the anchor housing safely outward and rearward to guarantee that wide outboard engine cowlings, trim actuators, and hydraulic steering rams have an entirely clear range of travel during tight maneuvers and extreme trim cycles.

Constructed from high-yield, premium extruded marine aluminum, the 1810367 model features an advanced monoblock design that contains no structural welds, completely eliminating internal weak points that could fracture under the heavy rotational leverage of anchor deployment in rolling coastal swells. To survive the brutal realities of high-salinity marine environments, the bracket is shielded with a specialized, multi-layered marine white powder coat. This hard-coat layer prevents aluminum oxidation, salt air pitting, and chalking caused by intense UV exposure, while matching your white marine gelcoat and modern coastal outboards for a flawless, factory-installed look. The kit arrives fully equipped with high-tensile marine-grade stainless steel mounting hardware and anti-seize compound, ensuring a fast, permanent installation that keeps your boat perfectly locked on point.

Key Features

• Premium Marine White Coating: Finished with a specialized coastal powder coat designed to resist salt pitting and UV yellowing, matching modern saltwater fiberglass hulls perfectly.
• Starboard-Side Optimized Geometry: Precision-angled and geometrically engineered explicitly for mounting on the right (starboard) side of your outboard motor for clean tracking alignment.
• Aggressive 6-Inch Setback Clearance: Pushes your shallow water anchor 6 inches away from the jack plate, avoiding any physical contact with wide outboard motor housings and bulky hydraulic steering lines.
• Monoblock Extruded Aluminum Core: CNC-machined from a single block of high-strength marine aluminum to ensure maximum shear resistance and eliminate weld fatigue under load.
• Zero-Transom-Drill Integration: Anchors directly to pre-existing side tracking channels on your jack plate, keeping your boat's fiberglass transom 100% sealed and waterproof.
• High-Tensile Saltwater Fasteners: Ships complete with premium stainless steel bolts, lock washers, and anti-seize lubrication to ensure a permanent, rust-free installation.
• Direct Factory Raptor Fit: Pre-drilled with Minn Kota's exact template layout to match the Raptor anchor base, removing the need for custom fabrication or modification.

Compatibility Information

The Minn Kota 1810367 Jack Plate Adapter Bracket features a specialized positional and structural focus. It is fully compatible with all models of the **Minn Kota Raptor Shallow Water Anchor family** across all depth ratings (8-foot and 10-foot models). Due to its standardized indexing template, it also accommodates legacy Minn Kota Talon mounting brackets and competitive anchors utilizing a standard side-mounting template footprint.

On the jack plate side, the bracket connects directly to the side tracking slots of most manual or hydraulic jack plates, including Atlas (T-H Marine), Bob's Machine Shop, Vance, and Slone. This specific model provides an aggressive 6-inch offset and is engineered **strictly for Starboard-Side installation only**. It cannot be inverted or converted to the port side without throwing off the structural alignment angles. Its premium white finish makes it an ideal match for high-end coastal center consoles, bay boats, and multi-species fiberglass hulls carrying wide-cowling high-horsepower outboards.

Frequently Asked Questions

Why is a 6-inch setback bracket like the 1810367 necessary for newer saltwater outboards?

The 6-inch setback bracket is highly recommended for modern high-horsepower saltwater outboards, such as the white Mercury Verado V8 or Yamaha Offshore V6 series. These newer engines feature very wide, aggressive cowling profiles and bulky hydraulic steering configurations that extend significantly further to the sides than older outboard designs. A standard 4-inch bracket may not push the anchor housing far enough outward, creating a risk that the engine cowling could strike the anchor bracket when turned completely to the lock position. The 6-inch offset provides an extra 2 inches of clearance, ensuring complete, worry-free steering and tilt travel.

Can I use this starboard bracket on a boat that does not have a jack plate installed?

No, the Minn Kota 1810367 is a dedicated "Jack Plate Adapter Bracket" and requires a physical manual or hydraulic jack plate mounted between your outboard engine and the boat's transom to function. The bracket relies on the flat side vertical surfaces and standard tracking channels of a jack plate to bolt into place. If your outboard motor is bolted directly to your boat's fiberglass transom without an intermediary jack plate, you cannot use this bracket. Instead, you will need to look into Minn Kota’s "Sandwich-Style" adapter brackets, which mount directly between the outboard engine bracket and the transom wall.

Will the white powder coating chip off or discolor when exposed to marine salt crust?

No, this premium marine finish is applied using an advanced electrostatic powder-coating process followed by high-temperature baking, which chemically bonds the protective layer to the aluminum core. This results in a highly durable, flexible shell that is exceptionally resistant to impact chipping, salt air pitting, and chemical degradation. To prevent salt crust from building up and looking unsightly, simply rinse the bracket down with fresh water along with the rest of your boat after each trip out on the water. This simple step will keep the finish looking pristine for years.

What torque specification should be used when tightening the jack plate mounting bolts?

When installing the Minn Kota adapter bracket to your jack plate, it is vital to follow accurate torque specifications to prevent damaging the aluminum threads or over-stressing the hardware. For the standard heavy-duty 1/2-inch stainless steel bolts provided in the kit, you should use a calibrated torque wrench to tighten the nuts to approximately 50 to 55 foot-pounds. Always ensure that you apply the included anti-seize lubricant to the threads before tightening, as this prevents thread galling and ensures an accurate torque reading across the entire mounting layout.

Does this starboard bracket interfere with my boat’s boarding ladder or trim tabs?

The 6-inch starboard bracket is designed to position the anchor back and outward to maximize clearance around your engine components. On most modern bay boats and center consoles, this layout leaves ample room for standard under-mount or flush trim tabs. However, if your boat features a large, folding transom boarding ladder or custom trim accessories mounted on the starboard side, you should carefully check its clearance path. Ensure that when the ladder is fully deployed or stowed, it does not strike the bracket arm or the Raptor anchor housing. If there is an overlap, you may need to adjust your layout or look into a port-side configuration.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.