#PanelType-SingleEngineCommandLinkSecondStationPanel
Yamaha Single Engine Command Link Second Station Switch Panel | 6X6-82570-01-00
The Yamaha Single Engine Command Link Second Station Switch Panel 6X6-82570-01-00 brings factory-style start and stop control to a secondary helm on compatible single-engine Yamaha boats. It is commonly used where a second operating station needs to mirror the main helm’s essential switch functions. The panel helps keep the auxiliary dash clean while supporting proper Yamaha Command Link station control.
Key Features
-
Single Engine Second Station Panel: Adds switch panel control for a secondary helm station on compatible Yamaha setups.
-
Command Link Integration: Designed for Yamaha Command Link Integrated Marine Information System applications.
-
Synchro Control System Use: Also intended for setups using Yamaha's Synchro Control System.
-
Second Station Only: Built for secondary station installations rather than main helm replacement.
-
Clean OEM Panel Layout: Keeps second-station switch functions organized and easy to access.
Installation Note
Installation should be completed with the battery disconnected and wiring matched to the correct Yamaha Command Link configuration. For second-station or multi-engine applications, verify the station layout and control system before connecting the panel.
FAQs
Q1: Is this switch panel for a main station or second station?
A1: This product is intended for second-station use on compatible Yamaha rigging systems. Confirm your helm layout and part number before ordering.
Q2: How should I confirm this is the correct Yamaha part?
A2: Match the part number to your current switch, panel, or Yamaha rigging reference, and confirm your engine count, station setup, and connector style before ordering.
Q3: Can I install this switch panel myself?
A3: Marine electrical work should be done with battery power disconnected and wiring matched correctly. If you are not sure about the rigging layout, have a qualified marine technician install or inspect it.
Q4: Is this an OEM-style Yamaha rigging part?
A4: Yes. This page is written for Yamaha key switch, switch panel, or station control applications using compatible Yamaha rigging.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
#PanelType-SingleEngineConventionalSecond StationPanel
Yamaha Single Engine Conventional Second Station Switch Panel | 6X1-82570-02-00
The Yamaha Single Engine Conventional Second Station Switch Panel 6X1-82570-02-00 is built for compatible single-engine boats with a secondary conventional control station. It gives the second helm a clean Yamaha switch panel for start and stop operation while keeping the layout simple. This panel is useful for dual-station boats that need dependable control access away from the main helm.
Key Features
-
Single Engine Second Station Panel: Adds conventional-style switch panel control for a secondary Yamaha helm station.
-
Command Link System Use: Designed for Yamaha Command Link Integrated Marine Information System applications.
-
Synchro Control System Compatible: Also intended for use with compatible Yamaha Synchro Control System setups.
-
Second Station Only: Made for second-station installations, not primary main station replacement.
-
Clean Service Replacement: Helps restore switch function and panel appearance at the secondary helm.
Installation Note
Installation should be performed with the battery disconnected and the wiring matched to the correct Yamaha conventional rigging configuration. Confirm the connector style, existing panel part number, and engine setup before installation.
FAQs
Q1: Is this switch panel for a main station or second station?
A1: This product is intended for second-station use on compatible Yamaha rigging systems. Confirm your helm layout and part number before ordering.
Q2: How should I confirm this is the correct Yamaha part?
A2: Match the part number to your current switch, panel, or Yamaha rigging reference, and confirm your engine count, station setup, and connector style before ordering.
Q3: Can I install this switch panel myself?
A3: Marine electrical work should be done with battery power disconnected and wiring matched correctly. If you are not sure about the rigging layout, have a qualified marine technician install or inspect it.
Q4: Is this an OEM-style Yamaha rigging part?
A4: Yes. This page is written for Yamaha key switch, switch panel, or station control applications using compatible Yamaha rigging.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
#PanelType-TwinEngineConventionalSecondStationPanel
Yamaha Command Link Twin Engine Second Station Switch Panel | 6X6-82570-11-00
The Yamaha Command Link Twin Engine Second Station Switch Panel 6X6-82570-11-00 is built for secondary helm control on compatible twin-engine Yamaha installations. It gives an upper station or auxiliary helm a clean switch panel layout for start and stop functions. This panel is a good fit when adding a second station or replacing worn hardware on an existing multi-station Yamaha Command Link setup.
Key Features
-
Twin Engine Second Station Panel: Designed for second-station use on compatible twin-engine Yamaha setups.
-
Synchro Control System Use: Made specifically for Yamaha Synchro Control System applications.
-
Second Station Only: Intended for secondary helm installations, not a primary main station replacement.
-
Compact Switch Layout: Keeps twin-engine second-station switch functions organized at the helm.
-
OEM Yamaha Panel Assembly: Maintains factory-style fit and dependable switch operation.
Installation Note
Installation should be completed with the battery disconnected and wiring matched to the correct Yamaha Command Link configuration. For second-station or multi-engine applications, verify the station layout and control system before connecting the panel.
FAQs
Q1: Is this switch panel for a main station or second station?
A1: This product is intended for second-station use on compatible Yamaha rigging systems. Confirm your helm layout and part number before ordering.
Q2: How should I confirm this is the correct Yamaha part?
A2: Match the part number to your current switch, panel, or Yamaha rigging reference, and confirm your engine count, station setup, and connector style before ordering.
Q3: Can I install this switch panel myself?
A3: Marine electrical work should be done with battery power disconnected and wiring matched correctly. If you are not sure about the rigging layout, have a qualified marine technician install or inspect it.
Q4: Is this an OEM-style Yamaha rigging part?
A4: Yes. This page is written for Yamaha key switch, switch panel, or station control applications using compatible Yamaha rigging.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
#PanelType-TripleEngineCommandLinkSecondStationPanel
Yamaha Command Link Triple Engine Second Station Switch Panel | 6X6-82570-20-00
The Yamaha Command Link Triple Engine Second Station Switch Panel 6X6-82570-20-00 is made for triple-engine Yamaha boats with an additional helm station. It places the needed start and stop switching in a clean panel layout for tower, flybridge, or secondary control locations. This panel is a practical solution for operators who need reliable Yamaha control access beyond the main dash.
Key Features
-
Triple Engine Second Station Panel: Designed for second-station control on compatible triple Yamaha outboard setups.
-
Command Link Exclusive: Built for Yamaha Command Link Integrated Marine Information System applications.
-
Second Station Only: Intended for a secondary helm, tower, or flybridge station.
-
Organized Multi-Engine Control: Keeps triple-engine switch functions grouped in one dedicated panel.
-
OEM Yamaha Construction: Designed for proper fit with Yamaha rigging and dash layouts.
Installation Note
Installation should be completed with the battery disconnected and wiring matched to the correct Yamaha Command Link configuration. For second-station or multi-engine applications, verify the station layout and control system before connecting the panel.
FAQs
Q1: Is this switch panel for a main station or second station?
A1: This product is intended for second-station use on compatible Yamaha rigging systems. Confirm your helm layout and part number before ordering.
Q2: How should I confirm this is the correct Yamaha part?
A2: Match the part number to your current switch, panel, or Yamaha rigging reference, and confirm your engine count, station setup, and connector style before ordering.
Q3: Can I install this switch panel myself?
A3: Marine electrical work should be done with battery power disconnected and wiring matched correctly. If you are not sure about the rigging layout, have a qualified marine technician install or inspect it.
Q4: Is this an OEM-style Yamaha rigging part?
A4: Yes. This page is written for Yamaha key switch, switch panel, or station control applications using compatible Yamaha rigging.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
