Yamaha - Conventional Trim and Oil Harness | 2004 and Older Yamaha Outboards | 31.2 ft | 68F-82553-90-00

Overview

The Yamaha Conventional Trim and Oil Harness 68F-82553-90-00 is a genuine Yamaha rigging component designed to carry supported trim, oil, and warning information from the outboard to compatible Yamaha gauges. This version is configured for 2004 and Older Yamaha Outboards, 31.2 ft.

Built for conventional gauge monitoring applications, this harness provides a dedicated connection that helps keep helm, engine, gauge, control, or network wiring organized and serviceable. Product application notes: Yamaha Trim and Oil Harness - 31.2' - Used on 2004 and Older Yamaha Outboard models with Digital Multifunction Gauges. This harness transfers trim and tilt level as well as oil pressure and other important information to Digital... Requirements vary by engine model, production year, station count, gauge family, connector style, and installed controls.

Key Features

• Application-specific Yamaha harness – Designed for conventional gauge monitoring rather than as a universal marine wiring lead.
• Dedicated connection – Provides the electrical or data path needed to carry supported trim, oil, and warning information from the outboard to compatible Yamaha gauges.
• Defined configuration – Matches the length, connector, engine-count, station, or application details shown in the product title.
• Organized rigging – Helps avoid improvised splices and keeps compatible wiring easier to route, inspect, and service.
• Installation or replacement use – Suitable for a new correctly planned installation or replacement of the same confirmed Yamaha part number.
• Genuine Yamaha component – Built to integrate with compatible Yamaha outboard electrical, gauge, control, steering, or network systems.

Compatibility and Application

• Compatible Yamaha conventional Digital Multifunction Gauges
• Supported Yamaha outboards for the listed production-year range
• New installations or service replacements calling for Yamaha part 68F-82553-90-00
• Single- or multi-engine layouts only when specified by the applicable Yamaha rigging diagram

Confirm compatibility using the Yamaha outboard model, serial or production year, control type, gauge family, connector arrangement, and applicable rigging diagram before installation.

FAQs

What is the Yamaha 68F-82553-90-00 used for?
It is used to carry supported trim, oil, and warning information from the outboard to compatible Yamaha gauges in a compatible Yamaha conventional gauge monitoring installation.

Is this harness universal?
No. Compatibility depends on the engine model, production year, gauge or control family, connector style, station count, and complete rigging layout.

Can it replace an existing harness?
Yes, when the existing component is Yamaha part 68F-82553-90-00 and the connectors and application match.

Does it include the complete rigging system?
No. Additional hubs, gauges, controls, adapters, power leads, switches, or engine-side harnesses may be required.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Supersessions
  64D-82553-90-00