Permatex - Cold Weld Bonding Compound 

15 minute, two-part adhesive and filler system that hardens like steel and eliminates the need for welding or brazing. Once cured, it can be drilled, sanded, painted or filed. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300° F intermittent. Over 3,000 psi shear strength on steel. Suggested Applications: aluminum, steel, brass, bronze, castings and stampings.

Features:

• Size - 1 oz. (2)
• Two-part adhesive and filler system that eliminates the need for welding or brazing
• Dries dark grey
• Resistant to anti-freeze, fuel, oil, water and other automotive fluids
• Can be drilled, filed and threaded
• Up to 3000 PSI strength on steel

Instruction:

1. Surface must be clean, dry and free from grease and dirt. Use Permatex Brake & PartsCleaner for best surface preparation; use isopropyl alcohol on plastics. To improve bond strength, roughen bond area with coarse sandpaper or wire brush prior to application.
2. Squeeze out equal amounts of weld agent and hardening agent; mix thoroughly until color is uniform.
3. Apply to surface being repaired and remove excess material immediately.
4. Sets in 8 minutes. Allow 16 hours (overnight) before returning part(s) to service.