Mercury – Premier Quad Engine DTS Electronic Remote Control | Remote Control | 8M0133247

Overview
This Premier quad-engine DTS control gives a calm, confident feel at the helm, even when you’re running four big motors at once. The levers move with a smooth, even resistance that makes small throttle bumps easy to hold without jumping past your mark. The integrated display is handy—it gives quick pop-ups and status notes without crowding the console. With Active Trim already built in, the whole setup stays cleaner and easier to manage on busy days offshore.

Key Features
 • Quad DTS Levers – Delivers smooth, predictable throttle and shift feel across all four engines.
 • Throttle-Only Mode – Helps with warmups and slow, careful movements.
 • One-Lever Mode – Lets all engines follow one lever when you want everything moving together.
 • Helm Transfer – Allows clean control handoff on multi-station boats.
 • Global Dimming – Softens indicator lighting for night or low-light running.
 • Trim All Engines – Levels the boat quickly with a single command.
 • Individual Engine Trim – Fine-tunes each engine separately for small corrections.
 • Start/Stop Options – Supports both all-engine and individual engine control.
 • Neutral Indicator Light – Confirms when the control is fully in neutral.
 • Integrated Active Trim – Builds auto-trim directly into the control.
 • Integrated Display – Shows pop-ups and feature status without adding extra screens.

Engine & Boat Compatibility
 • Digital Throttle and Shift
 • Quad-engine
 • SmartCraft control system
 • Active Trim
 • Multi-station boats

Performance & Practical Benefits
On the water, this control helps a large quad-engine setup feel more settled and manageable. The levers respond cleanly, which really helps when wind or current starts pushing the bow around. Trim All smooths things out as you climb onto plane, and individual trim lets you correct minor list or steering pull. The built-in display gives you quick cues without pulling your attention off the horizon, keeping the helming experience relaxed instead of chaotic.

Why Buy OEM
OEM DTS controls keep all four engines and helm stations talking clearly, avoiding hesitation or mismatched response. Mercury’s calibration holds steady over time, so the feel stays the same from season to season. It’s the dependable choice for big offshore boats that need consistent, coordinated control.

FAQ
Q1: How can I tell if my old quad control is starting to wear out?
A: Sticky shifts, uneven throttle feel, or trim buttons missing inputs are usually the first signs.

Q2: Does this control need setup after installation?
A: Yes—there’s a quick configuration step to sync it with the DTS system.

Q3: Is it suitable for saltwater use?
A: Yes, as long as you rinse it and keep up with normal helm care.

Q4: Anything to check before mounting it?
A: Make sure the console has enough depth for the wiring, the display, and the quad-lever footprint.

Q5: What if the integrated display stops showing pop-ups?
A: It’s often a calibration or network-signal issue rather than a problem with the control itself.