Free Shipping over $99
Earn up to 4.5% Back on Purchases
Assistance From Boat Parts Experts
Free Shipping over $99
Earn up to 4.5% Back on Purchases
Assistance From Boat Parts Experts

Mercury – Quicksilver Blue Wire Spark Plug Wire Kit | V8 Inboard Ignition System | Marine Grade | 847701Q26

SKU: 84-847701Q26
$93.36 $109.99
This product could earn you points
Learn more about PartsVu rewards

Description

Mercury – Quicksilver Blue Wire Spark Plug Wire Kit | V8 Inboard Ignition System | Marine Grade | 847701Q26


Overview

The Quicksilver 847701Q26 Blue Wire Spark Plug Wire Kit is made for V8 MerCruiser 377 Scorpion engines built between 1999 and 2000. Each wire is built to factory length and fitted with high-quality boots, ready to plug in and go. Designed by Mercury Marine, this OEM set delivers the strong, consistent spark that a performance engine like the Scorpion demands. It’s tough, dependable, and made to hold up in the real-world marine environment.


Key Features

  • Purpose: Sends a clean, steady spark to every cylinder for reliable starts and smooth running.
  • Material: Marine-grade silicone jacket and corrosion-resistant wire built to handle heat and moisture.
  • Performance: Keeps spark voltage consistent for better throttle response and efficient fuel burn.
  • Design: Pre-cut blue wires with tight-fitting boots made for perfect reach and easy routing.
  • Ease of Use/Install: Drops right in with no measuring, trimming, or modification needed.

Compatibility

  • Engines: V8 MerCruiser 377 Scorpion (1999–2000)
  • Engine Type: Inboard Marine
  • Common Boats: Ski Boats | Performance Runabouts | Sport Cruisers | Wake Boats

Performance & Real-World Benefits

This wire kit keeps your MerCruiser’s ignition system performing the way it should—strong, steady, and clean. You’ll notice quicker starts, smoother idle, and stronger pull through the midrange. The marine-grade insulation resists cracking and protects against corrosion from salt or humidity, so your spark stays sharp season after season. It’s an easy, factory-fit upgrade that helps your boat stay dependable every time you hit the water.


Why Choose OEM

Choosing Mercury Marine OEM parts means you’re using the same gear your engine was built with. Every Quicksilver wire set is tested for voltage balance, insulation strength, and resistance to marine wear. Aftermarket kits may fit loosely or use weaker materials that fail faster under heat or salt. With OEM, you get the perfect fit, the right performance, and the peace of mind that comes from genuine Mercury engineering.


FAQ

Q1: What engines does this fit?
It’s made for V8 MerCruiser 377 Scorpion inboard engines from 1999–2000.

Q2: Are the wires pre-fitted and ready to go?
Yes, they come pre-cut with boots already attached for quick installation.

Q3: Will they hold up in saltwater?
Absolutely—they’re marine-rated to resist corrosion, heat, and moisture.

Q4: Do these improve performance?
They keep spark delivery strong and consistent, helping the engine run smoother and start faster.

Q5: How many wires are in the kit?
It’s a full eight-wire set—one for each cylinder.

Reviews

★★★★★
★★★★★
★★★★★
★★★★★
Mercury Mercruiser - Spark Plug Wire Kit - Blue - Fits MCM 377 Scorpion - 84-847701Q26
Mercury

Mercury – Quicksilver Blue Wire Spark Plug Wire Kit | V8 Inboard Ignition System | Marine Grade | 847701Q26

$93.36 $109.99

Mercury – Quicksilver Blue Wire Spark Plug Wire Kit | V8 Inboard Ignition System | Marine Grade | 847701Q26


Overview

The Quicksilver 847701Q26 Blue Wire Spark Plug Wire Kit is made for V8 MerCruiser 377 Scorpion engines built between 1999 and 2000. Each wire is built to factory length and fitted with high-quality boots, ready to plug in and go. Designed by Mercury Marine, this OEM set delivers the strong, consistent spark that a performance engine like the Scorpion demands. It’s tough, dependable, and made to hold up in the real-world marine environment.


Key Features


Compatibility


Performance & Real-World Benefits

This wire kit keeps your MerCruiser’s ignition system performing the way it should—strong, steady, and clean. You’ll notice quicker starts, smoother idle, and stronger pull through the midrange. The marine-grade insulation resists cracking and protects against corrosion from salt or humidity, so your spark stays sharp season after season. It’s an easy, factory-fit upgrade that helps your boat stay dependable every time you hit the water.


Why Choose OEM

Choosing Mercury Marine OEM parts means you’re using the same gear your engine was built with. Every Quicksilver wire set is tested for voltage balance, insulation strength, and resistance to marine wear. Aftermarket kits may fit loosely or use weaker materials that fail faster under heat or salt. With OEM, you get the perfect fit, the right performance, and the peace of mind that comes from genuine Mercury engineering.


FAQ

Q1: What engines does this fit?
It’s made for V8 MerCruiser 377 Scorpion inboard engines from 1999–2000.

Q2: Are the wires pre-fitted and ready to go?
Yes, they come pre-cut with boots already attached for quick installation.

Q3: Will they hold up in saltwater?
Absolutely—they’re marine-rated to resist corrosion, heat, and moisture.

Q4: Do these improve performance?
They keep spark delivery strong and consistent, helping the engine run smoother and start faster.

Q5: How many wires are in the kit?
It’s a full eight-wire set—one for each cylinder.

View product