Mercury – Thruster Cable (15 ft) | Rigging Accessory | 84-8M0174064

Overview
This 15-foot thruster cable gives you some extra room to run the wiring between the thruster and its control module without forcing anything to fit. It’s a good choice when the shorter cable feels a bit tight or doesn’t route cleanly through the rig tube. With a little more length to work with, you can lay the cable in a smooth path, which usually helps the thruster respond more naturally around docks and in slow, tight spots.

Key Features
 • 15-Foot Length – Helpful when the 10-ft cable comes up short.
 • Thruster Connection Lead – Runs straight between the thruster and the control module.
 • Steady Signal Path – Keeps response steady and predictable.
 • Marine-Grade Jacket – Built to handle spray, heat, and vibration.
 • OEM Fit – Plugs directly into Mercury JPO rigging.

Engine & Boat Compatibility
 • Bow and stern thrusters
 • Joystick Piloting for Outboards
 • Single-engine pontoon JPO setups
 • SmartCraft-based systems

Performance & Practical Benefits
When the wiring isn’t stretched or shoved through tight corners, the thruster tends to react more smoothly. You’ll feel it most when you’re easing into a slip or trying to hold the boat steady on a breezy day. A clean wiring run also helps the cable last longer and keeps little electrical quirks to a minimum.

Why Buy OEM
OEM cables use the right connectors and proper marine-rated materials, so they hold up better and keep the system from developing random gremlins. It’s the easiest way to keep the thruster working the way it should.

FAQ
Q1: When is the 15-foot cable the right choice?
A: When the shorter cable just won’t reach comfortably or forces awkward bends.

Q2: Can I cut or splice it to fit?
A: Not a great idea—splices corrode fast and can weaken the signal.

Q3: Is it fine for saltwater?
A: Yes. Just keep the connector ends rinsed and clean.

Q4: Anything to watch while installing it?
A: Make sure it’s not rubbing on sharp edges or getting pinched in the rig tube.

Q5: What if the thruster still feels weak afterward?
A: Check battery voltage, grounds, and main power leads—those usually cause the issue.