Free Shipping over $99
Earn up to 4.5% Back on Purchases
Assistance From Boat Parts Experts
Free Shipping over $99
Earn up to 4.5% Back on Purchases
Assistance From Boat Parts Experts

Mercury – Thruster Cable (20 ft) | Rigging Accessory | 84-8M0174065

SKU: 84-8M0174065
$49.36 $58.13
This product could earn you points
Learn more about PartsVu rewards

Description

Mercury – Thruster Cable (20 ft) | Rigging Accessory | 84-8M0174065


Overview
This 20-foot thruster cable is made for boats where the thruster and control module sit a bit farther apart. It gives you the extra reach you need without forcing sharp bends or stretching a shorter wire. With enough length to route it the way you want, the thruster usually feels smoother and easier to control when you’re creeping around the dock or fighting a little wind.


Key Features
 • 20-Foot Cable – Extra length for wider layouts or longer rigging paths.
 • Direct Thruster Link – Connects the thruster to its control module.
 • Steady Connection – Helps the thruster respond evenly.
 • Marine-Grade Jacket – Handles spray, heat, and vibration.
 • OEM Fit – Built to work cleanly with Mercury JPO harnessing.


Engine & Boat Compatibility
 • Bow and stern thrusters
 • Joystick Piloting for Outboards
 • Single-engine pontoon JPO boats
 • SmartCraft-based systems


Performance & Practical Benefits
The extra length lets you route the cable naturally instead of forcing it into awkward corners. When the wiring isn’t under tension, the thruster tends to react more consistently—something you’ll notice when you’re nudging into a slip or keeping the boat steady in a crosswind. A cleaner run also helps the cable last longer.


Why Buy OEM
OEM wiring fits the connectors the right way and stands up better to real-life boating—spray, heat, vibration, all of it. It helps prevent the small electrical issues that cheaper cables can introduce.


FAQ
Q1: When should I use the 20-foot cable?
A: When the shorter options don’t reach comfortably or force tight bends.

Q2: Can I cut it to length?
A: It’s better not—cuts and splices tend to corrode and weaken the connection.

Q3: Good for saltwater?
A: Yes. Just keep the ends clean and rinsed.

Q4: Anything to watch during installation?
A: Make sure it’s not rubbing on sharp edges or getting pinched.

Q5: What if the thruster still feels weak afterward?
A: Check the battery, grounds, and main power lines—those cause most issues.

Reviews

★★★★★
★★★★★
★★★★★
★★★★★
Mercury - Cable-grd 20ft - 84-8M0174065
Mercury

Mercury – Thruster Cable (20 ft) | Rigging Accessory | 84-8M0174065

$49.36 $58.13

Mercury – Thruster Cable (20 ft) | Rigging Accessory | 84-8M0174065


Overview
This 20-foot thruster cable is made for boats where the thruster and control module sit a bit farther apart. It gives you the extra reach you need without forcing sharp bends or stretching a shorter wire. With enough length to route it the way you want, the thruster usually feels smoother and easier to control when you’re creeping around the dock or fighting a little wind.


Key Features
 • 20-Foot Cable – Extra length for wider layouts or longer rigging paths.
 • Direct Thruster Link – Connects the thruster to its control module.
 • Steady Connection – Helps the thruster respond evenly.
 • Marine-Grade Jacket – Handles spray, heat, and vibration.
 • OEM Fit – Built to work cleanly with Mercury JPO harnessing.


Engine & Boat Compatibility
 • Bow and stern thrusters
 • Joystick Piloting for Outboards
 • Single-engine pontoon JPO boats
 • SmartCraft-based systems


Performance & Practical Benefits
The extra length lets you route the cable naturally instead of forcing it into awkward corners. When the wiring isn’t under tension, the thruster tends to react more consistently—something you’ll notice when you’re nudging into a slip or keeping the boat steady in a crosswind. A cleaner run also helps the cable last longer.


Why Buy OEM
OEM wiring fits the connectors the right way and stands up better to real-life boating—spray, heat, vibration, all of it. It helps prevent the small electrical issues that cheaper cables can introduce.


FAQ
Q1: When should I use the 20-foot cable?
A: When the shorter options don’t reach comfortably or force tight bends.

Q2: Can I cut it to length?
A: It’s better not—cuts and splices tend to corrode and weaken the connection.

Q3: Good for saltwater?
A: Yes. Just keep the ends clean and rinsed.

Q4: Anything to watch during installation?
A: Make sure it’s not rubbing on sharp edges or getting pinched.

Q5: What if the thruster still feels weak afterward?
A: Check the battery, grounds, and main power lines—those cause most issues.

View product