End of Year Sale! • Up to 34% off OEM Essentials • Shop Now
PartsVu offers a complete selection of certified Mercury inflatable boat parts and accessories. Choose from our comprehensive collection of inflatable seat assemblies, cushions, keels, bow bag kits, and more.
Mercury Inflatable Boat Parts and Accessories Resources and Information?
Protect your valuables and ensure your safety with Mercury inflatable parts and accessories. PartsVu is proud to offer a complete selection of Mercury-certified inflatable components. A high-quality, well-cared-for inflatable can be expected to last anywhere between 5-10 years.
Looking for more parts and kits to service your outboard? Check out PatsVu’s complete selection of certified Mercury outboard parts.
We also regularly publish helpful resources to help you maintain your Mercury outboard motor, such as:
Mercury Inflatable Boat Parts and Accessories FAQs
How many life jackets are required on a boat?
So, how many life jackets are required on a recreational boat? The USCG requires that an appropriate, Coast Guard-approved life jacket be kept on board for each person on the boat. By federal law, children under 13 are required to wear their life jacket if the boat is underway unless they’re in an enclosed cabin or below deck. Passengers 13 and older aren’t legally required to wear a life jacket. However, they only work when you wear them. The Coast Guard recommends that all passengers wear their life jackets when the vessel is underway, regardless of age.
Note: State laws vary. It’s always a good idea to check local laws with your state boating safety officials. When boating in an area under the jurisdiction of the Army Corps of Engineers, or a federal, state, or local park authority, laws will likely vary.
If you choose not to wear your life jacket while on board, accessibility is crucial. Wearable PFDs must be readily accessible. That means they can’t be stored in bags, in locked/closed compartments, or have other gear on top of them. In an emergency, it’s critical that your lifejackets be accessible in seconds.
Similarly, throwable PFDs must be immediately available to throw to a person in need.
What are the Differences Between Life Jackets and PFDs?
First, let’s break down the general differences between the terms ‘life jacket,’ ‘life vest,’ and ‘PFD.’ Simply put, all life jackets and life vests are wearable PFDs (Personal Flotation Devices), but not all PFDs are life jackets, vests, or wearable, for that matter. A PFD is simply any device used to help a person stay afloat. This includes ring buoys, buoyant cushions, and inflatable belts. PFD designs include wearable and non-wearable styles, different types, and different performance levels.
How Do PFDs Work?
Standard PFDs use foam to stay afloat, though inflatable and hybrid designs are common as well.
Inflatable PFDs rely on CO2 cylinders. They inflated either manually, by pulling on a string, or automatically through exposure to water. The primary benefit of inflatables is that they tend to be lightweight and less bulky than other options. However, you always run the risk of a malfunction if the inflatable isn’t in proper condition. More on this later.
Regardless of their composition, the function of any PFD is to provide buoyancy if you unexpectedly find yourself in the water. Some are designed to simply assist the user in swimming. Others are designed to flip the wearer upright and allow them to breathe, even if they’re unconscious. Fatigue, injury, cold, or simply being a weak or non-swimmer are all conditions that may necessitate the extra help.
Why should boaters follow safety regulations?
Boating on various waterways is similar to automobiles out on the roads and highways—safety devices are designed to keep people safe. Thousands of accidents occur, many of which have a high probability of injury and a substantial number of cases resulting in death.
Specifically, in 2020 the Coast Guard counted 5,265 recreational boating accidents resulting in 767 deaths, 3,191 injuries, and approximately $62.5 million of property damage. Where the cause of death was known, 75% of fatal boating accident victims drowned. Of those drowning victims with reported life jacket usage, 86% were not wearing a life jacket.
Since most accidents occur unexpectedly, there may not be sufficient time to put on a life jacket, especially when stowed away in a locker. In cases where a person is thrown overboard, it is harder than you think to get them back on board, which can be assisted with proper equipment. Always be sure personal floatation devices (PFDs) are in good and serviceable condition. For extra protection, equip your PFDs with a whistle and emergency light.
What are the safety requirements for life jackets and personal flotation devices?
The best life jacket is the one you will wear, but adults are not required to wear their life jackets at all times. This said, US Coast Guard-approved life jacket is required on board for each person. Lifejacket regulations for children may vary by state; however, in states with no children’s life jacket law, a US Coast Guard interim rule requires children under 13 on moving boats to wear a well-fitting US Coast Guard-approved life jacket.
Lifejackets must be:
- The appropriate size for the intended user,
- Suitable for the intended activity,
- In good and serviceable condition, and
- US Coast Guard approved to meet carriage requirements.
Additionally, you must have a throwable (a square cushion, also called a Type 4 PFD) onboard if the boat is over 16 feet. A PFD like a ring buoy also meets this requirement.
Finally, for those who like to bring their dog along for the adventure: we recommend suiting up your pup as well. Dog life jackets aren’t a USCG requirement, but they are recommended— especially for certain breeds, such as greyhounds, whippets, dobermans, bulldogs, and many more.
What boat safety equipment should I have on hand?
When out on the water, the only items you have are the ones you bring. People often forget about the possibility of minor injuries, but some additional preparedness will have you ready for anything.
- Bring a first aid kit along for all outings. This is especially important when fishing.
- Since the sun reflects off the water, it is wise to consistently apply proper sun protection to make sure you don’t get burned. Sun protective clothing is a smart choice— it provides all-day protection that doesn’t need reapplying. Pro-tip: some sunscreen is toxic for the marine environment and repels fish, who can smell even trace amounts on bait. For any part of your body not covered by UPF clothing, use a sunscreen that’s both reef-safe and fish-friendly.
- While some boats are simply too large for this to be practical, carrying a paddle or two on board is a good idea in many cases. Even if you can’t paddle all the way back to a marina or dock when your engine goes, you may be able to reach the closest bit of land and wait for help. A good anchor with enough chain will also be helpful.
- We’ve written extensively on the importance of a VHF radio, but it simply can’t be overstated. Cell phones aren’t enough in many areas, and you’ll be glad to have the security.
- Be alert to changing conditions on the water and aware of weather that can change quickly. The danger of boating in a storm is no joke!
- Finally, bring plenty of drinking water for everyone on board to stay hydrated. In the face of unexpected problems, you don’t want to be caught stuck on your boat with an insufficient water supply.
What are Mercury inflatable boats?
Mercury inflatable boats are portable, lightweight, and easy-to-store watercraft that can be inflated with a pump and used for various recreational activities such as fishing, diving, and cruising.
What are some common Mercury inflatable boat parts?
Some common Mercury inflatable boat parts include inflatable tubes, air valves, seats, oars, paddles, foot pumps, electric pumps, repair kits, and storage bags.
Can I replace a damaged inflatable tube on my Mercury inflatable boat?
Yes, inflatable tubes are replaceable on Mercury inflatable boats. You can purchase replacement tubes from Mercury dealers or online stores that specialize in inflatable boat parts.
Can I use regular boat seats on my Mercury inflatable boat?
Yes, you can use regular boat seats on your Mercury inflatable boat as long as they are compatible with the boat's dimensions and weight capacity. Mercury also offers inflatable boat seats specifically designed for their inflatable boats.
How do I repair a puncture or tear in the inflatable tube of my Mercury inflatable boat?
You can use a repair kit that contains patches and adhesive to fix a puncture or tear in the inflatable tube of your Mercury inflatable boat. Follow the instructions in the repair kit carefully and make sure to clean and dry the damaged area before applying the patch.
Can I use an electric pump to inflate my Mercury inflatable boat?
Yes, you can use an electric pump to inflate your Mercury inflatable boat, but make sure to use a pump with a pressure gauge and an automatic shut-off feature to prevent over-inflation.
How do I store my Mercury inflatable boat when not in use?
Mercury inflatable boats should be stored in a dry, cool place away from direct sunlight and heat sources. Deflate the boat and clean it thoroughly before storing it in a storage bag or a cover designed for inflatable boats.
Are there any special maintenance tips for Mercury inflatable boats?
Yes, to prolong the life of your Mercury inflatable boat, make sure to clean it thoroughly after each use, avoid over-inflation, and store it properly. Also, check the boat's air pressure, valves, and seams regularly for any signs of damage or wear.
How to pump up a Zodiac boat?
- Locate the valve: First, locate the valve on the inflatable boat. The valve is usually located on the side of the boat and is a small plastic or metal piece that can be opened and closed.
- Attach the pump: Once you have located the valve, attach the pump to the valve. Most inflatable boat pumps come with different attachments, so make sure you use the one that fits your valve.
- Pump up the boat: Start pumping air into the boat. It's important to keep the pump at a consistent angle and to pump steadily to avoid air leaks. The boat will start to take shape as you pump, and it will become more rigid as it fills with air.
- Check the pressure: Once the boat is inflated, check the pressure to make sure it is at the recommended level. This information can usually be found on a label near the valve. Overinflating the boat can cause damage, so make sure you don't go over the recommended pressure.
How to patch inflatable boat?
- Locate the puncture: First, locate the puncture or tear in the inflatable boat. This may take some searching, so it's important to check the entire surface of the boat.
- Clean the area: Once you have located the puncture, clean the area around it with rubbing alcohol or another cleaning solution. This will ensure that the patch will stick properly.
- Apply the patch: Apply the patch over the puncture, making sure to press down firmly on all edges to ensure a strong seal. It's important to follow the instructions on the patch kit you are using, as different kits may have different application methods.
- Allow to dry: Let the patch dry for the recommended amount of time before using the boat again. This is usually around 24 hours, but again, follow the instructions on your patch kit to ensure a proper seal.
By following these steps, you can easily pump up and patch your inflatable boat, making sure it's ready for your next adventure on the water.
Where can I learn more about Mercury outboard parts?
PartsVu understands that boaters want to learn how to perform their own Mercury outboard maintenance. From maintaining your Mercury outboard, Mercury sterndrive, and MerCruiser engines, there’s always something new to learn and save money. That’s why PartsVu offers our comprehensive blog, The PartsVu Xchange.
Read up on the latest developments in boating, as well as search for everything you need to know about Mercury engine maintenance.
To get you off to a good start, these are some of the most important articles on Mercury Inflatable Boat Parts, Mercury Accessories, and more:
- Different Types of Boats — A Comprehensive Guide
- PFD 101: Selecting the Right Life Jackets
- Boating Safety - Essential Guide to Gear & Technologies
- Top 16 Gift Ideas for Kids Who Love to Boat - PartsVu
What are the most useful and popular Mercury inflatable boat parts?
Mercury inflatable boats are known for their durability and reliability. However, like any other boat, they require maintenance and occasional replacement of parts. Here are some of the most useful and popular Mercury inflatable boat parts:
- Inflatable boat repair kits - These kits contain patches, glue, and other necessary tools for repairing small punctures and tears in your inflatable boat.
- Air pumps - These pumps come in both manual and electric varieties and are used to inflate your boat quickly and easily.
- Oars and paddles - These are essential for rowing your inflatable boat, especially in case of a motor failure.
- Seats - Mercury inflatable boats come with seats, but if yours has been damaged or you need additional seating, there are replacement seats available.
- Davit systems - These are useful if you need to store your inflatable boat on a larger vessel. The davit system allows you to hoist your boat onto the deck of your larger boat for easy storage.
- Bimini tops - These tops provide shade and shelter from the sun and rain. They are available in a variety of colors and sizes to fit your specific boat.
- Anchors and anchor lines - These are essential for anchoring your boat in place and can be purchased in a variety of weights and sizes to fit your needs.
Overall, the most useful and popular Mercury inflatable boats parts are those that help with maintenance and repair, as well as those that add convenience and comfort to your boating experience.
What is a Quicksilver inflatable boat?
A Quicksilver inflatable boat is a type of inflatable boat produced by Mercury Marine, a division of Brunswick Corporation. Quicksilver inflatables are designed to provide a convenient and versatile way to enjoy the water. They come in various sizes and configurations, ranging from small dinghies to larger, more feature-rich boats that can accommodate multiple passengers and a variety of activities.
Quicksilver inflatable boats are made from durable, high-quality materials such as PVC or Hypalon, which are engineered to withstand the rigors of the marine environment. They are lightweight, easy to transport, and can be inflated and deflated quickly using a variety of methods, such as hand pumps or electric pumps.
In addition to their convenience and durability, Quicksilver inflatable boats are known for their stability and maneuverability on the water. They can be used for a wide range of activities, including fishing, cruising, water sports, and more. Whether you're a seasoned boater or a beginner, a Quicksilver inflatable boat can provide a fun and reliable way to explore the water.
What is an aluminum boat repair kit?
Aluminum boat repair kits are a set of materials and tools used to repair and patch up aluminum boats. These kits are usually composed of epoxy putty, fiberglass cloth, sandpaper, and a hardener. They come in handy when there is damage to the aluminum hull, such as cracks, holes, or scratches. The repair kit allows you to fix minor issues in your boat and prevent them from getting worse.
What is the best glue for inflatable SUP repair?
The best glue for inflatable SUP repair is a two-part adhesive, specifically designed for PVC materials. The adhesive should be strong, waterproof, and flexible. Brands like Clifton, Tear-Aid, and McNett have a good reputation for manufacturing high-quality PVC adhesives. It is important to follow the manufacturer's instructions when using the adhesive, as some may require sanding or cleaning the surface of the SUP before application.
What is a boat repair kit?
A boat repair kit is a collection of materials and tools needed to make minor repairs to a boat. These kits may include epoxy, fiberglass cloth, sandpaper, and other items specific to the type of boat and the area of repair. Boat repair kits are useful for repairing cracks, holes, scratches, and other minor damage that may occur to a boat. They can help prevent more significant damage from occurring and extend the life of a boat.
How can I repair a dinghy?
Dinghy repair can be done with a dinghy repair kit that includes glue and patches. To repair a dinghy, first, you need to clean the area around the puncture or tear, making sure it is dry and free from any debris. Cut a patch of the appropriate size and shape from the repair kit and apply glue to the damaged area. Place the patch over the glue, ensuring that it is smooth and has no air bubbles. Allow the glue to dry as per the manufacturer's instructions.
What is an inflatable patch repair kit?
An inflatable patch repair kit is a collection of materials used to repair tears, punctures, and holes in inflatable boats and other inflatables. These kits typically include patches made of PVC or other inflatable materials, adhesive, and other materials like sandpaper and cleaning supplies. The kit allows you to quickly and easily repair minor damage to your inflatable boat, extending its lifespan and ensuring that it remains safe to use.
How should I properly store my Mercury inflatable boat accessories for winterization?
Proper storage of Mercury inflatable boat accessories during winterization is crucial to prevent damage from harsh weather conditions. Firstly, clean the accessories with warm soapy water and dry them completely. Then, store them in a cool, dry place away from direct sunlight and moisture. It is recommended to use a storage bag or container to keep them organized and prevent any damage during transport or storage.
Can I leave my Mercury marine inflatable boat accessories outside during winter?
It is not recommended to leave your Mercury marine inflatable boat accessories outside during winter. The harsh weather conditions can cause damage to the accessories, and the freezing temperatures can cause the materials to crack or break. It is best to store them in a dry, cool place and avoid exposing them to extreme temperatures.
Should I cover my Mercury inflatable boat accessories during winter storage?
Yes, it is recommended to cover your Mercury inflatable boat accessories during winter storage. A cover will help protect the accessories from dust, moisture, and other debris. It will also help to prevent damage from any accidental impacts or exposure to extreme temperatures.
How often should I check on my stored Mercury inflatable boat accessories during winter?
It is recommended to check on your stored Mercury inflatable boat accessories at least once a month during winter storage. This will allow you to inspect the condition of the accessories and ensure that they are not being damaged by any environmental factors. If you notice any signs of damage or wear, address the issue immediately to prevent further damage.
Are there any special considerations I should take when storing Mercury inflatable boat accessories for an extended period?
If you plan to store your Mercury inflatable boat accessories for an extended period, there are a few extra considerations to keep in mind. Firstly, ensure that the accessories are completely dry and free from any moisture or debris before storing them. Secondly, store them in a location that is not exposed to extreme temperatures, humidity, or direct sunlight. Lastly, periodically inspect the accessories for any signs of damage or wear, and address any issues immediately to prevent further damage.
Which Mercury adhesive can I use to repair an inflatable on the water?
It is not recommended to repair an inflatable on the water. You should always bring your inflatable boat to shore and deflate it before attempting any repairs. As for the adhesive, Mercury offers several options for inflatable repairs, such as the Mercury Adhesive PVC Repair Kit and the Mercury Hypalon Adhesive Repair Kit. Both of these adhesives are designed to work specifically with the materials used in Mercury inflatables, and they are suitable for making repairs both on and off the water. However, it is important to follow the instructions carefully and allow adequate time for the adhesive to dry before inflating the boat again.
