BatteryLink Charger - 10Amp - 2-Bank

Charge two batteries at or away from the dock with a 10A multistage battery charger and integrated 65A Automatic Charging Relay (ACR)

• AC charging at the dock: Use AC shore power to charge two isolated battery banks with the 3 Stage 10 Amp battery charger
• DC charging away from the dock: Share the DC power from the alternator with both the Start and the Auxiliary battery through the integrated 65A ACR
• Battery Temperature Compensation prolongs battery life
• Start isolation protects sensitive electronics from voltage sags and spikes
• Includes LED remote indicator for charge status at the helm
• Snap-on insulating cover
• One-piece stainless flange nuts ensure safe and secure connections

Specifications

• Total Output Current: 10A
  
  
• Nominal Voltage: 12V DC
• Number of Outputs: 1 negative / 2 positive
• Terminal Stud Torque: 60 in-lb (6.78 Nm)
• Continuous Rating:65A
• Intermittent Rating:115A
• Universal AC Input Voltage: 90-265V AC
• AC Input Frequency: 50/60Hz
• Typical Float Voltage:13.5V DC
• Battery Types: AGM / Flooded / TPPL - Do not mix battery types
• Cable Size to Meet Ratings:10 AWG Negative Cable / 6 AWG Positive Cable
• Maximum Battery CCA: 850CCA
• Maximum Cable Size: 1/0 AWG (50mm)
• Operating Current: 10mA (No AC Power, ACR Open) / 60mA (No AC Power, ACR Closed)
• Recommended Battery Bank Sizes: 60Ah Minimum
• Terminal Stud Size:1/4"-20 (accepts M6 ring terminal)
• Warranty: 5 Year
• Combine 30 sec: 13.5V
• Combine 2 Min: 13.0V
• Open 10 sec: 12.35V
• Open 30 sec: 12.75V

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.