Mercury – VesselView 903 9-Inch Display Only | SmartCraft Rigging | 1-4 Engines | Black Finish | 8M0129544

Overview

The VesselView 903 (8M0129544) isn’t a bundle of cables and modules — it’s the display itself, the centerpiece of your Mercury SmartCraft setup. Think of it as the nerve center for your twin-engine rig. It pulls all your key data onto one clear, 9-inch screen so you can see what’s going on at a glance. No guessing, no juggling separate gauges. Just clean, instant info every time you turn the key.

If you already have a SmartCraft or VesselView Link system installed, this screen drops right in and brings your dash up to modern standards. It’s the kind of upgrade that feels small until you use it — then you’ll wonder how you ever boated without it.

Key Features

 • 9-Inch Touch Display – Big, bright, and clear even in full sun. Built tough for real marine conditions.
 • Single to Quad Engine Monitoring – Shows RPM, trim, fuel flow, voltage, and diagnostics for all engines.
 • SmartCraft Compatible – Connects directly to your existing VesselView Link or SmartCraft network.
 • NMEA2000 Support – Links to your boat’s radar, sonar, and sensors through the same network.
 • Built-In GPS and Chartplotter – Fast 10 Hz GPS refresh rate with optional detailed charts.
 • Wi-Fi and GoFree Cloud – Lets you update wirelessly and sync data through the cloud.
 • Simple Mounting – Flush-mounts cleanly into the dash or works with a gimbal bracket (sold separately).

Engine & Boat Compatibility

 • Engines: Mercury outboards and MerCruiser engine systems using SmartCraft technology
 • Systems: Works with VesselView Link and SmartCraft/NMEA2000 networks
 • Boat Types: Offshore center consoles, bay boats, catamarans, and cruisers

Performance & Practical Benefits

This display makes running multiple engines feel easier and more natural. All your readings — RPMs, trim, fuel burn — show up instantly and clearly. No delay, no confusion, just smooth, real-time feedback. The touchscreen feels responsive and intuitive, more like a phone than a marine gauge. And the best part? It cleans up your dash, replacing a handful of analog gauges with one sharp display that looks factory-built. Whether you’re setting up a new rig or replacing a worn-out screen, it’s the kind of upgrade that instantly tightens up the whole setup.

Why Buy OEM

Mercury built this display for its own engines, and that’s what makes it so dependable. It speaks your engine’s language directly — no lag, no compatibility guessing. Every number you see is true SmartCraft data, straight from the source. The housing is sealed tight against water and salt, and it’s backed by Mercury’s dealer network. When you buy OEM, you’re getting gear that fits, lasts, and works right from day one.

FAQ

Q1: Is this the full kit or just the screen?
This is the display only. It connects to your existing VesselView Link or SmartCraft network.

Q2: Which engines will it work with?
It’s made for Mercury outboards or MerCruiser setups that use SmartCraft or NMEA2000 networks.

Q3: What else do I need for it to work?
You’ll need an existing VesselView Link module or a fully wired SmartCraft system.

Q4: Can it handle saltwater use?
Absolutely. It’s sealed tight and corrosion-resistant for long life in tough conditions.

Q5: Can I install it myself?
If your wiring’s already in place, installation is simple. Otherwise, a Mercury dealer can get it hooked up right.