MerCruiser Engine Mounting Hardware

Although it's an often forgotten feature, failure to inspect and properly repair your marine engine mount can result in misdiagnosed, costly problems.

An engine mount is exactly what it sounds like – the part of your car that holds the engine in place. An engine mount is the part that holds the engine in your car. An engine mount should last many many years. Because your transmission and engine are bolted together, you need mounts to keep them from moving around. Boat engine mounts support a vessel's inboard engine, absorb its vibrations and, when necessary, align it with the propeller shaft via threaded bolts. However oil contamination, heat, and excessive vibration will cause early deterioration and failure.

Common applications for marine engine mounts include engines, gearboxes, gensets, and drive motors. Cut down on vibration-induced noise with quality marine engine mounts. Engine mounts, also known as motor mounts, are designed to secure your boat's engine and transmission to the transom. Even your sailboat motor mounts may need replacement if they've been fouled by years of seawater, coolant or engine oil contamination. In most cars, an engine and transmission are bolted together and held in place by three or four mounts. Marine and industrial engine mounts are used to isolate vibrations and shocks while reducing noise in mobile and stationary equipment. Marine engine mounts not only connect your engine to the boat, but they also keep engine vibration from passing through – cutting down on noise and discomfort. Mercury Marine Validated Engine Mounting Hardware.

Most Mercruiser inboards use 4 of these mounts and most sterndrives use 2. Motor Mount that was used on most Mercruiser V-6 and V-8 engines. One side of the mount is bolted to the engine while the other is attached to the frame. Selecting the proper engine mount begins with a discussion about how the drivetrain transfers thrust to the hull. Symptoms of a bad or failing engine mount: impact noises coming from the engine bay. The mount that holds the transmission is called the transmission mount, others are referred to as engine mounts The rubber in the center absorbs vibrations while allowing a small amount of movement.

Usually, engine mounts should last between at least 5-7 years, depending on the application. Usually, there's one mount holding the transmission and two or three holding the engine. another symptom of a bad or failing motor mount is excessive vibration, and engine movement. One of the most common symptoms associated with worn engine mounts are impact noises coming from the engine bay, and excessive vibrations.