Changed at manufacturer-recommended intervals, Mercruiser fuel filter replacements will help keep your engine running at peak performance.
Mercury
Mercury Mercruiser Outboard Water Separating Fuel Filter - 35-802893T
$13.99$19.00Unit price /UnavailableMercury
Mercury Quicksilver - Outboard & MerCruiser Water Separating Fuel Filter - 35-802893Q01
$13.99$19.00Unit price /UnavailableMercury
$1.98$2.80Unit price /UnavailableMercury
$60.99$71.17Unit price /UnavailableMercury
$27.49$32.33Unit price /UnavailableMercury
$37.51$44.17Unit price /UnavailableMercury
$42.99$49.92Unit price /UnavailableMercury
$8.00$11.30Unit price /UnavailableMercury
$6.16$8.70Unit price /UnavailableMercury
Mercury Mercruiser Fuel Filter - Fits MerCruiser 1.6L Vazer - 3.0L MPI EC Engines - 35-866594K01
$16.92$23.90Unit price /UnavailableMercury
$143.70$170.25Unit price /UnavailableMercury
$27.46$32.33Unit price /UnavailableMercury
$12.99$17.90Unit price /UnavailableMercury
$53.99$62.92Unit price /UnavailableMercury
$53.99$62.92Unit price /UnavailableMercury
$113.34$114.40Unit price /UnavailableMercury
$7.08$10.00Unit price /UnavailableMercury
Mercury Mercruiser - Water Separating Fuel Filter - Fits QSD 2.0, 2.8, & 4.2 Engines - 35-879172104
$73.19$86.17Unit price /UnavailableMercury
$12.99$17.90Unit price /UnavailableMercury
$35.53$41.83Unit price /UnavailableMercury
$7.93$11.20Unit price /UnavailableMercury
$152.21$180.33Unit price /UnavailableMercury
$5.73$8.10Unit price /UnavailableMercury
$7.08$10.00Unit price /UnavailableMercury
$14.01$19.80Unit price /UnavailableMercury
Mercury Quicksilver - Carburetor Fuel Filter - For Rochester 2 & 4 bbl. - 35-8767Q
$10.99$15.20Unit price /UnavailableMercury
$77.29$91.00Unit price /UnavailableMercury
$14.01$19.80Unit price /UnavailableMercury
Mercury Mercruiser - Carburetor Fuel Filter - For Rochester 2 & 4 bbl. - 35-8767T
$10.76$15.20Unit price /UnavailableMercury
Mercury Mercruiser 882376 Water Separating Fuel Filter - Fits 1.7 MS 120
$20.31$23.92Unit price /UnavailableMercury
$78.78$92.75Unit price /UnavailableMercury
$7.57$10.70Unit price /UnavailableMercury
Mercury Quicksilver - Fuel Filter - Fits MerCruiser 1.6L Vazer & 3.0L MPI EC Engines - 35-866594Q01
$16.99$23.90Unit price /Unavailable
MerCruiser Fuel Filters Resources and Information
Mercruiser in-line fuel filters, Mercruiser in-line fuel filters, Mercruiser fuel-water separating filters, and more can be easily sourced. Replacing these filters at recommended maintenance intervals helps to assure long engine life and optimal engine performance.
You should have your boat's fuel filters changed during scheduled maintenance and oil changes, which are typically done every 200-300 hours of running time or on a calendar basis such as semi-annually or quarterly. Mercruiser fuel filter replacements for all common engine models are available at PartsVu.
Browse the rest of our complete selection of Mercury and Mercruiser fuel filters and other Mercury outboard filters and strainers, including:
- Water Separating Gasoline Fuel Filters
- Water Separating Diesel Fuel Filters
- Fuel Filters for Carburetors
- Fuel Filters for Fuel Pumps
We also offer helpful resources to help you maintain your Mercury outboard motor, such as:
- Mercury Outboard Engine Schematics
- Mercury Outboard 100-hour Service Guides
- Mercury Outboard Specs & Capacities Chart
FAQs - Fuel Filters for MerCruiser Sterndrives
Why is it Important to Change the Fuel Filter in a MerCruiser Outboard?
Your Mercruiser outboard fuel filter is essential for maintaining your engine’s performance and lifespan. Here are a few reasons why it’s important to change your MerCruiser in-line fuel filter regularly:
- Eliminating Debris and Buildup: Fuel filters catch contaminants like dirt, debris, rust particles, and other impurities that may be present in your fuel. Over time, these contaminants can clog your filter, restricting fuel flow to the outboard.
- Protect Your Engine: A clogged fuel filter can restrict fuel flow, resulting in engine misfires, rough idling, reduced power, and even stalling. Replacing the fuel filter ensures a consistent flow of clean fuel, which helps protect the engine from potential damage.
- Fuel Efficiency: Using a clean filter improves fuel efficiency, preventing waste and saving you money on fuel costs.
- Longevity of System Components: The corrosive elements filtered out by your Mercruiser outboard fuel filter could otherwise cause serious damage to your outboard components. Regularly replacing your fuel filter protects these components, ultimately prolonging the life of your MerCruiser outboard.
What are the Signs that Indicate the Need to Replace Your MerCruiser Outboard Fuel Filter?
There is more than one sign that might indicate that your MerCruiser fuel filter needs replacing. The following are a few of the most common:
- Engine Stalling: Frequent engine stalling or an inability to maintain a steady idle could indicate a clogged fuel filter restricting fuel flow.
- Reduced Power and Performance: A dirty or clogged fuel filter will eventually lead to decreased engine power, resulting in poor acceleration, and reduced performance.
- Difficulty Starting the Engine: If you experience difficulty starting your outboard motor, especially after running, it could be due to a clogged fuel filter impeding fuel delivery.
- Fuel System Issues: Contaminants in the fuel can lead to serious fuel system issues like fuel pump failure or fuel injector problems. A failing fuel filter can contribute to these issues, necessitating a replacement.
- Increased Fuel Consumption: A clogged fuel filter can cause inefficient combustion and fuel consumption. If you notice a sudden decrease in fuel efficiency, it might be time to replace the fuel filter.
It is crucial to be attentive to these signs and consistently inspect and replace the fuel filter as a vital aspect of your maintenance routine to ensure your MerCruiser outboard’s smooth and trouble-free operation.
How Often Should the Fuel Filter Be Replaced in a MerCruiser Outboard?
Mercuiser in-line fuel filter replacement frequency depends on several factors, including usage and environmental conditions. As a general guideline, it is recommended to replace the fuel filter after every 100 hours of engine operation or at least once a year, whichever comes first. However, suppose you frequently operate your outboard in a dusty or dirty environment or notice any signs of fuel-related issues. In that case, you should regularly inspect and replace the fuel filter. Regular maintenance and adherence to the manufacturer’s recommendations will help ensure the proper functioning of your MerCruiser outboard and extend the lifespan of the fuel system components.
What are the Steps to Change a MerCruiser In-Line Fuel Filter?
Here is a step-by-step guide on how to change a Mercruiser outboard in-line fuel filter.
- Locate the in-line fuel filter: Look for the filter assembly, which typically has a little red clip to release both sides of the filter.
- Set a Paper Towel Drip Barrier: Place paper towels or rags directly below the filter to catch any fuel that may drip to prevent fuel spills during the filter removal.
- Release the filter: Use the flathead screwdriver to press the red clip and release both sides of the filter. Push it in firmly and then try to move it to pop it off.
- Catch excess fuel: Place your thumb over the filter to prevent fuel from spilling upon removal.
- Remove the old filter: Once the filter pops out, carefully pull it out while keeping your thumb on it to contain any remaining fuel.
- Inspect the filters: Look at the old filter for any signs of oil contamination.
- Check the arrow: The filter will have an arrow indicating the direction of fuel flow. Install the new filter with the arrow facing the correct way.
- Install the new fuel filter: Align the new filter with the fuel line and press it firmly into place on both sides. You should hear and feel a click when it is securely installed.
- Clean up: Dispose of the old filter properly and clean any spilled fuel. Use paper towels or rags to wipe down any surfaces.
Following these steps, you can change the in-line fuel filter on your MerCruiser outboard and maintain a clean fuel system for optimal performance.
Taking the time to perform this simple maintenance task of changing the in-line fuel filter in your MerCruiser outboard will ensure a clean fuel system and help keep your engine running at its best.
Why is Changing the Fuel/Water Separator Filter Important?
Changing the fuel-water separator filter is critical for your MerCruiser Verado outboard engine’s functioning and longevity. Here’s why this maintenance task is crucial:
- Water and Contaminant Removal: The fuel-water separator filter removes water, dirt, debris, and other contaminants from the fuel before it reaches the engine. Over time, these impurities can accumulate and hinder the engine’s performance, leading to issues such as fuel starvation, reduced power, and potential engine damage.
- Prevention of Fuel System Damage: Water is particularly problematic for fuel systems, as it can cause corrosion, fuel line blockages, and injector malfunctions. Regularly changing the fuel-water separator filter prevents water from reaching the engine and safeguards against costly repairs or replacements.
- Enhanced Engine Performance: A clean and efficient fuel supply is crucial for optimal engine performance. Replacing the filter ensures a consistent fuel flow without obstructions, leading to improved combustion, better fuel efficiency, and smoother outboard engine operation.
- Manufacturer’s Recommendations: Most outboard engine manufacturers provide guidelines on regular maintenance, including the recommended interval for changing the fuel-water separator filter. Following these recommendations ensures you adhere to the manufacturer’s specifications and maintain warranty coverage.
By changing the fuel-water separator filter at the recommended intervals, you ensure the cleanliness of the fuel supply, protect the engine from potential damage, and maintain the optimal performance and reliability of your outboard engine.
What are the Signs of a Clogged or Faulty Fuel-Water Separating Filter?
Recognizing the signs of a clogged or faulty fuel-water separating filter is essential for maintaining the performance and longevity of your outboard engine. Here are some indicators that may suggest it’s time to replace the filter:
- Engine Misfires or Stalling: A clogged filter restricts the fuel flow, causing the engine to misfire or stall. If you notice your engine hesitating, lacking power, or struggling to maintain a consistent speed, it could be a sign of a clogged filter.
- Difficulty Starting the Engine: A filter at the end of its life may make it harder to start the engine. If you experience prolonged cranking or difficulty getting the engine to fire up, it’s worth inspecting the fuel/water separator filter.
- Reduced Fuel Efficiency: A decrease in fuel efficiency is another potential sign of a clogged filter. When the filter is obstructed, the engine may not receive enough fuel, leading to increased fuel consumption and reduced mileage.
- Irregular Engine Idling: A clogged or faulty filter can cause the engine to idle erratically or inconsistently. If you notice the engine idling roughly or experiencing fluctuations in RPM, it may be due to a compromised fuel/water separator filter.
If you observe any of these signs, it is advisable to inspect and replace the fuel-water separator filter promptly. Regularly monitoring the filter’s condition and being proactive in its replacement can help maintain the performance and reliability of your outboard engine.
How Often Should Your MerCruiser Fuel-Water Separator Filter Be Replaced?
The frequency of replacing your MerCruiser outboard fuel-water separator filter depends on various factors, including engine usage, operating conditions, and manufacturer recommendations. As a general guideline, replacing the filter at least once per year or every 100 hours of engine operation is recommended, whichever comes first.
It is crucial to consult the manufacturer’s guidelines and consider the specific recommendations for your outboard engine model to ensure proper maintenance and optimal performance. Regular inspection and replacement of the fuel/water separator filter will help safeguard your engine from damage and maintain a clean fuel supply.
What are the Steps for Changing a MerCruiser Outboard Fuel-Water Separator Fuel Filter?
Step 1: Remove the Fuel/Water Separator:
- Locate the fuel-water separator, typically near the water sensor.
- Next, disconnect the harness running to the key switch.
- Finally, use the specialized MerCruiser fuel filter tool to loosen and remove the fuel/water separator from its housing.
Step 2: Prep the new fuel/water separator.
- Apply a small amount of grease to the O-rings on the new fuel/water separator. This will help the O-rings seat properly and prevent binding.
Step 3: Install the New MerCruiser Outboard Fuel/Water Separator:
- Begin by hand-tightening the new fuel/water separator into the housing.
- Next, use the MerCruiser fuel filter tool to securely tighten the filter, ensuring it is snug but not over-tightened.
Step 4: Reconnect the Harness
Regularly performing this maintenance task will help keep your fuel system clean and your engine running smoothly, ensuring optimal performance and prolonging the life of your outboard engine.