Free Shipping over $99
Earn up to 4.5% Back on Purchases
Assistance From Boat Parts Experts
Free Shipping over $99
Earn up to 4.5% Back on Purchases
Assistance From Boat Parts Experts

Mercury – Next-Gen ERC Extension Harness Kit (Single) | 10-Foot Extension | 98-8M0173878

SKU: 98-8M0173878
$125.27 $147.51
Free Shipping!
This product could earn you points
Learn more about PartsVu rewards

Description

Mercury – Next-Gen ERC Extension Harness Kit (Single) | 10-Foot Extension | 98-8M0173878


Overview
This ten-foot extension gives a single-engine Next-Gen ERC setup the extra distance it needs when the stock harness just won’t reach cleanly. It’s useful on boats where the rigging path runs a little farther than expected or takes a few tight turns. Instead of stretching the wiring or forcing awkward bends, this extension lets everything lay out naturally. It’s a simple way to make the control run feel smoother and easier to route.


Key Features
    • Ten-Foot Extension – Adds plenty of slack for longer routing paths.
    • Single-Engine ERC Use – Designed for one-engine Next-Gen electronic remote control systems.
    • OEM Connectors – Factory-fit ends that lock in securely.
    • Relaxed Wiring Path – Helps avoid sharp corners and pulled harnesses.
    • Consistent Signal Flow – Keeps throttle and shift input steady.


Engine & Boat Compatibility
    • Next-Gen ERC
    • Single engine
    • Digital rigging layouts


Performance & Practical Benefits
The added length makes routing far less stressful, especially when the harness needs to travel across bulkheads or through a tight rigging bay. Controls usually feel cleaner because the wiring isn’t kinked or under strain. It also makes future service easier since the harness follows a smoother, more open path. For longer runs, this extension brings a noticeable sense of breathing room.


Why Buy OEM
OEM extensions handle vibration, heat, and saltwater better than off-brand wiring. The connectors match Mercury’s spec, so you’re not chasing random glitches or loose fittings. It’s dependable gear meant to last through real-world use.


FAQ
Q1: How do I know I need this extension?
A: If the ERC lead falls short or forces a tight bend on a longer run, this ten-footer usually solves it.

Q2: Any setup or calibration needed?
A: Nope—plug it in and it’s ready.

Q3: How does it handle saltwater?
A: Fine, just rinse occasionally and check the connectors.

Q4: Any install tips?
A: Give it a smooth route with gentle curves so nothing is under tension.

Q5: What are early signs it may be wearing out?
A: Sticky or hesitant control feel, intermittent signals, or jacket rubbing.

Reviews

★★★★★
★★★★★
★★★★★
★★★★★
Mercury - Kit-erc ext sgl - 98-8M0173878
Mercury

Mercury – Next-Gen ERC Extension Harness Kit (Single) | 10-Foot Extension | 98-8M0173878

$125.27 $147.51

Mercury – Next-Gen ERC Extension Harness Kit (Single) | 10-Foot Extension | 98-8M0173878


Overview
This ten-foot extension gives a single-engine Next-Gen ERC setup the extra distance it needs when the stock harness just won’t reach cleanly. It’s useful on boats where the rigging path runs a little farther than expected or takes a few tight turns. Instead of stretching the wiring or forcing awkward bends, this extension lets everything lay out naturally. It’s a simple way to make the control run feel smoother and easier to route.


Key Features
    • Ten-Foot Extension – Adds plenty of slack for longer routing paths.
    • Single-Engine ERC Use – Designed for one-engine Next-Gen electronic remote control systems.
    • OEM Connectors – Factory-fit ends that lock in securely.
    • Relaxed Wiring Path – Helps avoid sharp corners and pulled harnesses.
    • Consistent Signal Flow – Keeps throttle and shift input steady.


Engine & Boat Compatibility
    • Next-Gen ERC
    • Single engine
    • Digital rigging layouts


Performance & Practical Benefits
The added length makes routing far less stressful, especially when the harness needs to travel across bulkheads or through a tight rigging bay. Controls usually feel cleaner because the wiring isn’t kinked or under strain. It also makes future service easier since the harness follows a smoother, more open path. For longer runs, this extension brings a noticeable sense of breathing room.


Why Buy OEM
OEM extensions handle vibration, heat, and saltwater better than off-brand wiring. The connectors match Mercury’s spec, so you’re not chasing random glitches or loose fittings. It’s dependable gear meant to last through real-world use.


FAQ
Q1: How do I know I need this extension?
A: If the ERC lead falls short or forces a tight bend on a longer run, this ten-footer usually solves it.

Q2: Any setup or calibration needed?
A: Nope—plug it in and it’s ready.

Q3: How does it handle saltwater?
A: Fine, just rinse occasionally and check the connectors.

Q4: Any install tips?
A: Give it a smooth route with gentle curves so nothing is under tension.

Q5: What are early signs it may be wearing out?
A: Sticky or hesitant control feel, intermittent signals, or jacket rubbing.

View product