Mercury – Fuel Filter, High Capacity | Fuel System | 35-8M0079962

Overview

A lot of fuel-related headaches come from filters that can’t keep up with the flow your setup needs. This high-capacity Quicksilver filter is built for boats running multiple engines or anything that pulls a lot of fuel through a vessel-mounted system. It handles a strong flow rate without starving the motor, and it does a solid job catching water and fine debris before they get anywhere near your injectors. If you’ve ever chased a hesitation that only shows up at higher RPM, a high-flow filter like this is usually the missing piece.

Key Features

 • High-Capacity Element – Supports up to 120 gallons per hour for multi-engine or high-demand setups.
 • 10 Micron Filtration – Removes fine contaminants and power-robbing water with over 90% efficiency.
 • Epoxy-Coated Interior – Helps protect against internal corrosion in harsh marine environments.
 • Corrosion-Resistant Exterior Paint – Adds durability against spray, weather, and fuel vapor.
 • Extra Filter Media – Over 25% more media than many aftermarket filters for longer, cleaner service.

Engine & Boat Compatibility

 • Vessel-mounted fuel filter kits
 • Quicksilver kit 8M0095669
 • Outboard systems
 • Sterndrive and inboard setups

Performance & Practical Benefits

A high-flow filter like this keeps the engine supplied even when you’re running hard or feeding multiple motors from the same tank. Throttle response improves because fuel pressure stays steadier through the entire RPM range. You’re also reducing the risk of water-related hiccups—the kind that make an engine stumble right when you’re climbing onto plane. It’s one of those upgrades that quietly makes the whole boat feel more reliable.

Why Buy OEM

OEM fuel filters match Mercury’s flow and filtration specs, so you know you’re not choking the system or letting junk slip through. The materials hold up to ethanol, moisture, and vibration far better than many aftermarket options. With OEM, the fuel system behaves the way the engine designers intended.

FAQ

Q1: What signs suggest the fuel filter is getting clogged?
A: Hesitation at higher RPM, rough idle, or the engine falling flat when you throttle up.

Q2: How often should this type of filter be replaced?
A: Many boaters replace them annually, especially in humid or high-use environments.

Q3: Will this work for dual-engine setups?
A: Yes—its high fuel-flow rating is designed for multi-engine rigs.

Q4: Does this filter remove water as well as debris?
A: Yes—its 10-micron media is designed to pull out both particles and water before reaching the engine.

Q5: Can I use it on non-Quicksilver filter heads?
A: It fits Quicksilver vessel-mounted kits like 8M0095669; check your head’s thread and spec before swapping.