Mercury – Quicksilver Engine Starter | Direct Drive Series | 12-Volt | 8M6007324

Overview

Some engines have a way of telling you exactly how your day is going to go. Turn the key, hear that clean, confident crank, and you can almost feel the water welcoming you back. The Quicksilver 8M6007324 starter brings that kind of reliability to select 25–35 horsepower Evinrude and Johnson outboards from 1998–2000. It’s a small part, but its importance is huge—especially when your boat’s been sitting for a week, or when you’re launching before sunrise with the tide moving just right. This is a starter that gives you the steady assurance every boater appreciates.

Key Features

• Designed for select 3-cylinder, 25–35 horsepower Evinrude and Johnson outboards (1998–2000)
• Permanent magnet direct-drive system for smooth, efficient starting
• Counter-clockwise rotation with a 10-tooth gear
• High-temperature epoxy-sealed armatures for corrosion resistance
• Durable 90/10 copper bushings or heavy-duty needle bearings
• Built to meet Marine SAE J1171 ignition protection standards

Engine & Boat Compatibility

This Mercury Marine part is engineered for:

• Evinrude and Johnson 3-cylinder outboards from 1998–2000
• 25, 30, and 35 horsepower models
• Common boat types including skiffs, small fishing boats, tenders, jon boats, and lightweight runabouts

If your outboard uses the matching OEM starter references, this unit is designed to install cleanly and perform exactly as intended.

Performance & Practical Benefits

A good starter does more than turn an engine—it sets the tone for the entire trip. With the 8M6007324, you’ll feel a tight, positive engagement the moment you turn the key. The permanent magnet design gives your engine the torque it needs to turn over quickly, even during cold starts or after extended storage. The crank feels smooth and steady, without the hesitation or strain that often comes with tired or aftermarket starters.

Quicksilver’s corrosion-resistant materials and sealed armature windings help this starter stand up to moisture, spray, vibration, and the slow wear that saltwater environments are known for. It’s built to take real-world use—long days on the water, bumpy rides, unexpected squalls—and keep performing the same way every time.

Why Buy OEM

Choosing an OEM-grade part means choosing fewer problems later. With the 8M6007324, everything lines up the way your engine’s designers intended—mounting points, torque output, electrical characteristics, and drive gear timing. You’re not gambling on fitment or longevity.

Aftermarket starters may look similar, but they rarely match the durability, engineering, and marine-specific protections built into a Quicksilver product. When you’re relying on your engine to get you across open water, OEM isn’t an upgrade—it’s common sense.

FAQ

Q1: Which engines does this starter fit?

It fits select 1998–2000 Evinrude and Johnson 3-cylinder outboards between 25 and 35 horsepower.

Q2: What sets this apart from aftermarket starters?

Superior materials, marine-specific construction, and perfect OEM-matched design.

Q3: How can I confirm compatibility?

Match your existing starter’s OEM part number or check your engine’s owner’s manual.

Q4: Can this be used in saltwater and freshwater?

Yes—it’s built with corrosion-resistant components suited for any marine environment.

Q5: Is installation simple?

Most boat owners with basic tools can install it without difficulty.