Contact Our Parts Experts: 1-888-625-5460

Hablamos Español

Permatex - Permapoxy 5 Minute General Purpose Epoxy - .84 oz. - 84101

SKU: PV747625
$6.19 $8.99
This product could earn you points
Learn more about PartsVu rewards
Free Shipping Over $149.00

Description

Permatex - Permapoxy 5 Minute General Purpose Epoxy

Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents.Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI.

Features:

  • Size - .84 oz. Dual Syringe Cartridge
  • General purpose epoxy with non-drip gel formula for mess free application
  • Blue dye indicator disappears when epoxy is ready to apply
  • Permanent strength up to 3000 PSI strength
  • Dries clear and no clamping required
  • Water resistant, non-shrinking formula

Instruction:

  1. PROTECT: Work area must be protected from accidental spills.
  2. CLEAN: Surfaces must be clean, dry and free of grease and oil.
  3. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper)
  4. OPEN PACKAGE: Remove tubes and use the back of cap or a sharp point to puncture seals.
  5. DISPENSE: Squeeze tubes to dispense resin and hardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored.
  6. APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes).Remove any excess epoxy immediately.
  7. CURE TIME: Usable strength is reached in four hours at72°F (22°C). Cooler temperatures may require longer set time.
  8. CLEAN-UP: Attach nozzle caps and store in molded tray.

NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.

Reviews

★★★★★
★★★★★
★★★★★
★★★★★
PERMATEX

Permatex - Permapoxy 5 Minute General Purpose Epoxy - .84 oz. - 84101

$6.19 $8.99

Permatex - Permapoxy 5 Minute General Purpose Epoxy

Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents.Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI.

Features:

Instruction:

  1. PROTECT: Work area must be protected from accidental spills.
  2. CLEAN: Surfaces must be clean, dry and free of grease and oil.
  3. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper)
  4. OPEN PACKAGE: Remove tubes and use the back of cap or a sharp point to puncture seals.
  5. DISPENSE: Squeeze tubes to dispense resin and hardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored.
  6. APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes).Remove any excess epoxy immediately.
  7. CURE TIME: Usable strength is reached in four hours at72°F (22°C). Cooler temperatures may require longer set time.
  8. CLEAN-UP: Attach nozzle caps and store in molded tray.

NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.

View product