MerCrusier 8.2L MCM & MIE Service Parts

MerCruiser 8.2 MCM & MIE Parts - Resources & Information

As one of the most popular models of sterndrive MerCruiser engines, both the 8.2 L MerCruiser MCM & MIE series are renowned for its year-after-year reliability, high performance, and longevity. Over time, however, these MerCruiser motors degrade due to operating in harsh aquatic environments, heavy usage, and the lifespan of individual components. 

To keep your MerCruiser 8.2L MCM & MIE running reliably year after year, it’s important to understand your MerCruiser inside and out. That’s why PartsVu offers so many useful resources to help you maintain your MerCruiser 8.2L MCM & MIE every step of the way. 

Whether you’re looking to change your lower unit oil, replace your old filters, or troubleshoot 8.2 MerCruiser engine problems, PartsVu helps you get the job done and enjoy worry-free boating. 

To help you find the right MerCruiser 8.2L MCM & MIE parts plus in-depth articles for reference, check out some of our helpful MerCruiser resources and the FAQ below:

• MerCruiser Inboard Maintenance
• MerCruiser Maintenance Parts Library
• Mercury Outboard and MerCruiser Resources Collection

MerCruiser 8.2L MCM & MIE Service Parts FAQ

Is winterizing my MerCruiser 8.2L MCM & MIE important?

While it’s always a bit more fun to pull out your boat than to put it away, properly winterizing your MerCruiser engine should be mandatory for all experienced boaters. Winterizing helps avoid engine damage and will facilitate a smoother start to the beginning of next season - after all, no one wants to wait to get back on the water!

There are several important steps you should take when storing your MerCruiser lower unit to ensure that it’s properly winterized.

1. Flush Your Engine - Thoroughly flush your 8.2 liter marine engine to remove any salt buildup if you are a saltwater boater, or accumulated mud and grime if you are a freshwater boater. Failure to remove this debris from your MerCruiser lower unit leads to corrosion in the engine. And if you’re a saltwater boater, leftover salt crystals in the lower unit can act like sandpaper to your internal engine components.
2. Stabilize Your Fuel System - It is vital to use a fuel stabilizer like Quickstor Fuel Stabilizer when your boat will be sitting unused for any more than two or three months. Add the amount of fuel stabilizer directed on the product’s packaging to your fuel—for instance, 1 ounce of MerCruiser Fuel Stabilizer and Conditioner Plus for every gallon of gasoline, assuming the engine will be stored for more than 2 months. 
3. Fog Your MerCruiser Engine - Mercury Storage Seal Fogging Oil is a wax-based oil that coats the engine to prevent corrosion.
4. Change Out the Lower Unit Oil - We strongly recommend changing your MerCruiser gear lube before storage to make sure that there is no water in the lower unit’s oil. Any water in the oil could freeze, expand, and crack your lower unit. Also, changing lower unit oil means one less thing to do at the beginning of next season.
5. Disconnect Your Battery - Disconnect your battery and spray MerCruiser Battery Terminal Protector & Cleaner on your battery terminals.

How do I prepare my MerCruiser 8.2L MCM & MIE at the start of a new season?

After the cold season is finally over, it’s time to break out your 8.2 MerCruiser engine again. However, there are a few tasks you’ll need to perform before putting your engine(s) back in the water for optimal performance: 

1. Uncover & Unwrap - Before you fold up your engine cover and store it in a trash bag, the engine cover fabric itself should be cleaned. To do so, use a soft brush and a canvas-friendly cleaner like StarBrite Sail & Canvas cleaner.
2. Perform a Complete Walk-Around Inspection - With the cover off the boat, the next step in MerCruiser season breakout is to perform a walk-around inspection. Check for any leaks under the boat, specifically below the engine. Gear lube, engine oil, trim fluid, and gasoline are possible causes for any leaks or stains. Also, trust your gut - if something seems different than when you stored it, take a look to determine if any damage occurred. 
3. Protect Your Boat from Harmful UV Rays - UV rays can degrade your boat’s shine and even cause damage given enough time. Consider applying a coat of wax to protect your boat from UV rays. If you noticed your hull has a chalky appearance, applying a polishing compound before waxing brings out a bright, attractive shine.
4. Battery & Electrical System Assessment - If you removed or disconnected your batteries for storage during the offseason, it’s time to reconnect them. Before you do, visually inspect batteries for evidence of any physical deformation, leakage, corrosion, and age, especially around the terminals.
5. Inspect the Bilge Pumps, Float Switches & Fresh Water Systems - Float switches and bilge pumps are critical safety gear that are absolutely essential for worry-free boating in the new season. Properly wired float switches should function with or without the battery switch being turned on, so be sure to check both ways. Most boats are also wired so that the operator can manually toggle the bilge pump on. Check to see if the pump runs properly and that your bilge wiring, discharge hose, hose clamps, and thru-hull fitting are all in great shape. If your boat’s freshwater system was winterized, be sure to fill your tanks and flush antifreeze from the system, and dispose of it per the manufacturer’s recommendations. Consider a product like Spring Fresh to flush the freshwater system and clean the lines of any remaining antifreeze.

How do I perform external engine maintenance for my MerCruiser 8.2L MCM & MIE?

Your MerCruiser engine’s external engine components need regular servicing during the lifespan of owning your motor. There are regular maintenance intervals that must be met for Mercury engines, including 20-hour service, every 100 hours, 300 hours, and so forth. 

The following is Mercury’s maintenance schedule for 100 hour and 300 hour maintenance intervals, including external engine maintenance and all other required tasks: 

100 Hours/1 Year

300 Hours/3 Years

How do I use schematics for my 8.2 MCM & MIE MerCruiser?

If you’re looking for in-depth information for maintaining and repairing your MerCruiser inboard or sterndrive motor, PartsVu offers MerCruiser Engine Schematics and our helpful article, “How to Select the Right MerCruiser Parts”. 

Start at the Mercury MerCruiser schematics page. Once there, you will choose the right parts for your MerCruiser by searching either by your inboard or sterndrive’s Primary Identification Number (PID) located at the top of this page or look up your model using a series of dropdown menus on the left side of the page.

How do I select the right parts for my MerCruiser inboard or sterndrive engines?

PartsVu’s Mercury MerCruiser Maintenance Parts Library is the perfect reference when you need to replace common parts for 8.2 MerCruiser performance upgrades. That’s because these 8.2 l MerCruiser performance parts charts make it simple to find the right parts for your particular engine to perform regularly-scheduled maintenance. Additionally, find your MerCruiser cooling system diagram in your MerCruiser Owner’s Manual - an invaluable resource when choosing the right parts and repairing your inboard or sterndrive. 

For MerCruiser inboard or sterndrive motors, the first maintenance interval comes at 20 hours, then you’ll perform maintenance after 100 hours of service or one year of operation (whichever comes first). More extensive service is recommended after reaching 300 hours of service or three years, so the 100 hours addresses components that receive more wear and tear (such as fuel filters and oil filters).

After this period, maintenance is often more regular as the engine ages and parts wear out. For example, 1,000 hours generally requires an in-depth assessment by a qualified mechanic. Also, if you’re usually running your Mercury inboard or sterndrive in a more demanding manner, the manufacturer recommends more frequent servicing.

When selecting the correct Mercury MerCruiser Parts, there are some essential things every boater must keep in mind before purchasing and installing parts:

• Choosing MerCruiser OEM parts (original equipment manufacturer) over after-market parts often yields better long-term results for your engine as these components and products are specifically designed to meet the precise tolerances of Mercury engines.

• Check (and recheck) to ensure that you have the exact part number that matches your Mercury inboard or sterndrive 8.2 l marine engine. It’s important to do this because Mercury has many MerCruiser engine models that look very similar but contain slight differences in performance. Therefore, unmatched parts may not fit uniformly, leading to malfunctions, underperformance, and severe engine damage. For example, 8.2 horizon MerCruiser engine parts do not necessarily fit all other MerCruiser 8.2L models.

• Proper maintenance is essential when it comes to extending the life of your 8.2 Mercury motor and should always be mandatory to retain the value of your inboard or sterndrive motor. While Mercury 8.2L engines are built to last, hazards like salt water, humidity, excessive heat, electrolysis, and demanding usage eventually take their toll on your motor.

• Proper storage for your Mercury inboard or sterndrive is required to preserve your motor for the long term. Failure to properly winterize your Mercury engine can cause components to degrade while the engine sits and is exposed to the elements. Therefore, properly store your engine(s) when not in regular use.