Mercury – Oil Filter for Yamaha ATVs and Motorcycles | Quicksilver Series | Standard Finish | 8M0130580

Overview

If you spend any real time on a Yamaha — on the trail, down a fire road, or weaving through the woods — you know how much trust you put in your engine every time you roll onto the throttle. That trust depends on clean, steady oil flow, and that’s exactly what this Quicksilver oil filter delivers. It’s the kind of part you install once and feel good about every time the engine fires up. No drama, no dry starts, no wondering if the filter is doing its job. Just a smooth, confident start that lets you focus on the ride ahead.

Key Features

• Original equipment replacement oil filter for Yamaha ATVs and motorcycles
• Rugged canister with 17-millimeter exposed nut for easy removal
• Anti-drain-back valve to prevent dry starts and keep oil where it belongs
• Built to maintain consistent oil flow in high-heat, high-RPM riding conditions
• Designed to withstand vibration, dust, moisture, and harsh off-road environments

Engine & Vehicle Compatibility

• Fits a wide range of Yamaha ATVs, utility vehicles, and motorcycles
• Suitable for on-road, off-road, and mixed-terrain riding
• Compatible with four-stroke powersport engines requiring this Quicksilver filter style
• Works well for recreational riders, ranch and farm ATVs, and high-use trail machines

Performance & Practical Benefits

When you turn the key or hit the start button, you’ll notice how steady and responsive the engine feels. The anti-drain-back valve keeps oil suspended in the galleries, so the engine is protected immediately upon startup. That means less wear, fewer harsh crank rotations, and a smoother jump into idle — especially important on chilly mornings or after letting the machine sit for a while.

The filtration media inside is engineered to trap fine debris without restricting flow. Yamaha engines tend to run clean but hot, especially under load, so that balance of filtration and flow really matters. This filter keeps things smooth even when you’re climbing hills, hauling gear, or pushing through rutted terrain.

Installation is straightforward thanks to the exposed nut on the canister. If you’ve ever wrestled with an oil filter tucked behind a skid plate or wedged near a header pipe, you’ll appreciate how simple this one is to grab, spin, and replace. It’s a small detail that saves a lot of frustration.

Why Buy OEM

Aftermarket filters vary widely in quality, and many don’t regulate oil flow the way Yamaha engines require. This genuine Mercury Marine part meets the same standards used for marine engines — engines built to run hot, hard, and for long stretches without fail. That means better long-term protection and fewer surprises down the road.

Choosing OEM is simply smart. You get proper fitment, dependable sealing, and filtration that’s been tested in real-world conditions. If you were giving advice to a buddy in the garage, this is the filter you’d tell them to use.

FAQ

Q1: Which engines does this oil filter fit?

It fits select Yamaha ATVs, motorcycles, and other four-stroke powersport engines that call for this filter style.

Q2: Why choose it over aftermarket options?

Because OEM-spec filtration media and a reliable anti-drain-back valve give more consistent, safer lubrication.

Q3: How can I confirm compatibility?

Check your owner’s manual and match the part number — 8M0130580.

Q4: Is it safe for both trail and highway use?

Yes. It’s built for versatile use, from off-road miles to daily on-road riding.

Q5: Is installation easy?

Very. The exposed nut makes the filter simple to remove, even in tight spots.